• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.168-175
• /
• 2003

In this research, a bridge-type flexure hinge mechanism is developed and optimized to amplify the displacement of a multilayer piezostack. Developed hinge mechanism has three-dimensional structure to reduce link size, so it have high amplification ratio with respect to small size. A flexure hinge is assumed to be 6 degree-of-freedom spring elements and matrix methods are used to model a hinge mechanism. To verify derived matrix model, a displacement and frequency experiments are performed. The analysis result shows that the displacemental error between matrix model and experiments is below 10 percents and the deformation of hinge in parasitic direction should be considered In hinge modeling. Using developed matrix model, an optimal design is performed to maximize the performance of hinge mechanism.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1534-1542
• /
• 1997

In this paper, we present a performance improvement method for the direction-of-arrival (DOA) estimation algorithm of the narrowband signals incident on a uniform circular array. It is very important to estimate the covariance matrix effectively because the performance of DOA algorithm mainly depends on the exactness of the sampel coveriance matrix which is computed from the received samples of signals. In case of uniform circular array with the even number sensors, the structure of the arrray has a useful geometrical property. Therefore we present the method which can estimate covariance matrix more effectively using this property. The simulation results are shown to demonstrate the superior perfodrmance obtained by the proposed covariance matrix estimation method relative to that of the conventional estimation method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1074-1077
• /
• 1997

Newton-Raphson method is mainly used since it shows remarkable convergence characteristics. It, however, needs considerable calculation time in construction and calculation of inverse Jacobian matrix. In this paper a new type of load flow equation is summarized as follows: Since inverse calculation of Jacobian matrix is not needed in the suggested algorithm but using complex bus voltage, the calculation process is simple. With the simple structure, reduction of calculation time is achieved.

• 제어로봇시스템학회논문지
• /
• 제18권9호
• /
• pp.806-811
• /
• 2012

In this paper Hartley functions are used to approximate the solutions of continuous time linear dynamical system. The Hartley function and its integral operational matrix are first presented, an efficient algorithm to solve the Stein equation is proposed. The algorithm is based on the compound matrix and the inverse of sum of matrices. Using the structure of the Hartley's integral operational matrix, the full order Stein equation should be solved in terms of the solutions of pure algebraic matrix equations, which reduces the computation time remarkably. Finally a numerical example is illustrated to demonstrate the validity of the proposed algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.410-414
• /
• 2004

Under longitudinal loading continuous fiber reinforced metal matrix composite(MMC) have interpreted an outstanding performance. However, the applicability of continuous fiber reinforced MMCs is somewhat limited due to their relatively poor transverse properties. Therefore, the transverse properties of MMCs are significantly influenced by the properties of the fiber/matrix interface. In this study, elastic-plastic behavior of transversely loaded unidirectional fiber reinforced metal matrix composites investigated by using elastic-plastic finite element analysis. Different fiber placement(square and hexagon) and fiber volume fractions were studied numerically. The interface was treated as three thin layer (with different properties) with a finite thickness between the fiber and the matrix. The analyses were based on a two-dimensional generalized plane strain model of a cross-section of an unidirectional composite by the ANSYS finite element analysis code.

• Structural Engineering and Mechanics
• /
• 제33권3호
• /
• pp.307-323
• /
• 2009

This article presents the differential system that governs the mechanical behaviour of a curved-beam element, with varying cross-section area, subjected to generalized load. This system is solved by an exact procedure or by the application of a new numerical recurrence scheme relating the internal forces and displacements at the two end-points of an increase in its centroid-line. This solution has a transfer matrix structure. Both the stiffness matrix and the equivalent load vector are obtained arranging the transfer matrix. New structural matrices have been defined, which permit to determine directly the unknown values of internal forces and displacements at the two supported ends of the curved-beam element. Examples are included for verification.

• Communications for Statistical Applications and Methods
• /
• 제23권6호
• /
• pp.575-585
• /
• 2016

Longitudinal studies repeatedly measure outcomes over time. Therefore, repeated measurements are serially correlated from same subject (within-subject variation) and there is also variation between subjects (between-subject variation). The serial correlation and the between-subject variation must be taken into account to make proper inference on covariate effects (Diggle et al., 2002). However, estimation of the covariance matrix is challenging because of many parameters and positive definiteness of the matrix. To overcome these limitations, we propose autoregressive moving average Cholesky decomposition (ARMACD) for the linear mixed models. The ARMACD allows a class of flexible, nonstationary, and heteroscedastic models that exploits the structure allowed by combining the AR and MA modeling of the random effects covariance matrix. We analyze a real dataset to illustrate our proposed methods.

• 동아시아경상학회지
• /
• 제8권4호
• /
• pp.45-65
• /
• 2020

Purpose - This paper is to analyze the system and the models of financial analysis in the assessment of economic consistency and the creditability of borrower. To test the process of complex express-analysis, it is utilized by the concentric matrix models by using the matrix of 5×5.. Research design, data, and methodology - The estimation of economic consistency, the creditworthiness, the complex express-analysis with application of concentric matrix models were carried out on the basis of data of the report for the 2017 of corporations POSCO and in the first half of the 2018 Daewoo Shipbuilding & Marine Engineering of South Korea. Results - This paper focused on the unbalance of the corporate financial structure (capital, receivable) and the assessment of sustainability development, taking into account the liquidity, solvency, financial sustainability and economic viability of the enterprise. Conclusions - this paper also consider the theoretical means of regulating receivables. The material is presented in the pedagogical context and appendix of the conclusion.

• Interdisciplinary Bio Central
• /
• 제6권4호
• /
• pp.3.1-3.10
• /
• 2014

Amino acid substitution matrices are essential tools for protein sequence analysis, homology sequence search in protein databases and multiple sequence alignment. The PAM matrix was the first widely used amino acid substitution matrix. The BLOSUM series then succeeded the PAM matrix. Most substitution matrixes were developed by using the statistical frequency of substitution between each amino acid at blocks representing groups of protein families or related proteins. However, substitution of amino acids is based on the similarity of physiochemical properties of each amino acid. In this study, a new approach was used to obtain major physiochemical properties in multiple sequence alignment. Frequency of amino acid substitution in multiple sequence alignment database and selected attributes of amino acids in physiochemical properties database were merged. This merged data showed the major physiochemical properties through principle components analysis. Using factor analysis, these four principle components were interpreted as flexibility of electronic movement, polarity, negative charge and structural flexibility. Applying these four components, BAPS was constructed and validated for accuracy. When comparing receiver operated characteristic ($ROC_{50}$) values, BAPS scored slightly lower than BLOSUM and PAM. However, when evaluating for accuracy by comparing results from multiple sequence alignment with the structural alignment results of two test data sets with known three-dimensional structure in the homologous structure alignment database, the result of the test for BAPS was comparatively equivalent or better than results for prior matrices including PAM, Gonnet, Identity and Genetic code matrix.

• 대한전자공학회논문지SD
• /
• 제43권7호
• /
• pp.50-57
• /
• 2006

Low-density parity check (LDPC) code는 최근 그 우수한 성능으로 인하여 4세대 무선 이동 통신용 채널 코딩으로 주목받고 있고 유럽의 고화질 위성방송 규격으로 채택되었다. 그러나 기존의 연구들이 제안한 parity check matrix (H-matrix)는 실제로 하드웨어로 구현함에 있어서 인코더 혹은 디코더에 제약을 가지고 있다. 이러한 문제점을 해결하고자 본 논문에서는 인코더와 디코더 양쪽 모두 효율적으로 하드웨어로 구현이 가능한 hybrid H-matrix 구조를 제안한다. Hybrid H-matrix는 semi-random 방식과 partly parallel 방식을 결합하여 하드웨어로 구현시 partly parallel 방식이 가지는 디코더의 복잡도가 감소되는 장점을 유지하면서 인코더 또한 semi-random 방식을 사용하여 복잡도가 감소된다. 제안한 구조를 사용하여 LDPC 인코더와 디코더를 설계하고 합성하여 기존의 결과와 비교하였다.