• 한국항행학회논문지
• /
• 제19권4호
• /
• pp.299-304
• /
• 2015

본 논문에서는 MATLAB GUI 기반으로 개발된 GPS RINEX 관측 파일 생성 소프트웨어에 대해서 소개한다. 개발된 소프트웨어는 두 가지 데이터 생성 모드를 기반으로 기준국 혹은 동적 사용자의 실제 GPS 측정치와 유사한 L1/L2 의사거리, L1/L2 반송파 위상, 도플러 측정치를 정확하고 효율적으로 생성한다. 생성된 측정치 결과는 최종적으로 RINEX version 3.0 관측 파일로 출력된다. 본 논문에서는 소프트웨어 검증을 위해 기준국의 실측 데이터를 기반으로 측정치 바이어스, 변화율, 잡음 수준을 분석해보았다. 그 결과 개발된 소프트웨어가 실제 GPS 측정치와 RMS 약 0.7 m 수준의 바이어스 오차를 갖는 GPS 측정치를 생성함을 확인하였다.

• Computers and Concrete
• /
• 제19권2호
• /
• pp.203-210
• /
• 2017

The purpose of this paper is to evaluate the settlement of lightweight coarse aggregate of self-compacting lightweight concrete (SCLC) after placement of concrete on its final position. To investigate this issue, sixteen samples of concrete mixes were made. The water to cementitious materials ratios of the mixes were 0.35 and 0.4. In addition to the workability tests of self-compacting concrete (SCC) such as slump flow, V-funnel and L-box tests, a laboratory experiment was made to examine the segregation of lightweight coarse aggregate in concrete. Because of the difficulties of this test, the image processing technique of MATLAB software was used to check the segregation above too. Moreover, the fuzzy logic technique of MATLAB software was utilized to improve the clarity of the borders between the coarse aggregate and the paste of the mixtures. At the end, the results of segregation tests and software analyses are given and the accuracy of the software analyses is evaluated. It is worth noting that the minimum and maximum differences between the results of laboratory tests and software analyses were 1.2% and 9.19% respectively. It means, the results of image processing technique looks exact enough for estimating the segregation of lightweight coarse aggregate in SCLC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.449-451
• /
• 2000

Arcing fault on overhead lines can be detected by amplitude of the arc voltage using numerical algorithm. In the case of transient fault, the arc voltage has any high value. In the case of permanent fault, the arc voltage is near zero. Thus, fault distance estimation should be performed by digital distance relay algorithm[3]. The purpose of this study is to build a structure for modeling of arcing fault detection and fault distance estimation algorithm using Matlab programming. Additionally, this algorithm has been designed in Graphical User Interface(GHI). So, this method using GUI interface of Matlab can reduce the number of simulation steps in modeling the distance relay.

• 산업기술연구
• /
• 제19권
• /
• pp.361-368
• /
• 1999

The Nelder-Mead simplex algorithm has become on of the most widely used methods for nonlinear unconstrained optimization, since 1965. Recently, this algorithm has been reevaluated and many papers on this algorithm are being published. The MATLAB computer software, highly renown in engineering, also provides the Nelder-Mead algorithm and the Denis-Woods modification with FMINS function. The authors made C++ code of these algorithms and compared with FMINS on the convergence behavior and the exactness of solutions. It shows that MATLAB's FMINS is inferior to author's C++ code. So, FMINS should be corrected for every user.

• 융합신호처리학회논문지
• /
• 제11권2호
• /
• pp.169-176
• /
• 2010

Sag, Swell, Impulsive Transient, Harmonics 등의 비정상 전력품질 신호들은 산업체 전력전자 장비, 속도 조절 장치, 공정 제어 시스템의 운전에 상당히 나쁜 영향을 미쳐 전력 공급자 및 수용가 입장에서 매우 중요한 이슈가 되어왔다. 따라서 본 연구에서는 이상의 전력품질 신호들을 획득, 분석 및 인식하기 위하여 Matlab, Simulink, CCS 등의 소프트웨어와 TI의 TMS320C6713DSK 하드웨어 키트와 웨이블릿 변환과 신경 회로망 역전파 알고리즘을 사용하여 전력품질 인식 시스템을 구현하였다. 이 시스템의 실시간 인식 성능을 파악하기 위하여 SIL(Software In the Loop)와 PIL(Process In The Loop)를 수행하였고, 그 결과 평균 99%의 우수한 인식결과를 보여주었다.

• 한국전자통신학회논문지
• /
• 제6권1호
• /
• pp.27-33
• /
• 2011

본 논문에서는 SGR(software-based Global Positioning System receiver)에서 GPS(Global Positioning System)의 자료처리과정을 분석하기 위해서, GPS 신호의 수신방법을 심도있게 분석했다. 그리고 이 처리과정을 Matlab를 사용해서 모의실험을 했다. 실험결과, 이 분석방법의 타당성을 찾을 수 있었고, 이 실험은 실제 환경조건에서와 일치함을 확인할 수 있었다. 또 SGR의 성능을 향상시키기 위해서는 수신기의 성능을 향상시켜야 한다는 사실을 확인 할 수 있었는데, 동조되는 최적의 주파수는 수십 Hertz내에서 위상을 비교해서 찾을 수 있었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.121-128
• /
• 2008

Modularized GPS software defined radio (SDR) has many advantages of applying and modifying algorithm. Hardware based GPS receiver uses many hardware parts (such as RF front, correlators, CPU and other peripherals) that process tracked signal and navigation data to calculate user position, while SDR uses software modules, which run on general purpose CPU platform or embedded DSP. SDR does not have to change hardware part and is not limited by hardware capability when new processing algorithm is applied. The weakness of SDR is that software correlation takes lots of processing time. However, in these days the evolution of processing power of MPU and DSP leads the competitiveness of SDR against the hardware GPS receiver. This paper shows a study of modulization of GPS software platform and it presents development of the GNSS software platform using MATLAB Simulink™. We focus on post processing SDR platform which is usually adapted in research area. The main functions of SDR are GPS signal acquisition, signal tracking, decoding navigation data and calculating stand alone user position from stored data that was down converted and sampled intermediate frequency (IF) data. Each module of SDR platform is categorized by function for applicability for applying for other frequency and GPS signal easily. The developed software platform is tested using stored data which is down-converted and sampled IF data file. The test results present that the software platform calculates user position properly.

• Structural Engineering and Mechanics
• /
• 제64권1호
• /
• pp.23-31
• /
• 2017

In the study, dynamic behavior of laminated orthotropic beams on elastic foundation is investigated. Consistent model presented here combines the finite element solution of the system with SAP2000 software and the calculation of soil parameters with MATLAB software using Modified Vlasov Model type elastic foundation. For this purpose, a computing tool is coded in MATLAB which employs Open Application Programming Interface (OAPI) feature of SAP2000 to provide two-way data flow during execution. Firstly, an example is taken from the literature to demonstrate the accuracy of the consistent FEM-Vlasov Model. Subsequently, the effects of boundary conditions, subsoil depth, elasticity modulus of subsoil, slenderness ratio, velocity of moving load and lamination scheme on the behavior of laminated orthotropic beams on elastic foundation are investigated on a new numerical example. It can be concluded that it is really convenient to use OAPI feature of SAP2000 to model this complex behavior of laminated orthotropic beams on elastic foundation under moving load.

• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.888-893
• /
• 2000

This paper deals with the development of an automatic design software for DC servo motor control, which provides good performance with rapid response and velocity control accuracy. In the proposed method, the design is automatically executed using Matlab, and iterative learning control algorithms are used in the design process. We applied this method to 50W, 100W, 200W, 300W, 500W, 750W, 1.8kW and 4.5kW DC servo motors which are widely used in the industry. We compare the results of the manual tuning design method with that of the automatic design method presented in this paper. From the experimental results, we can find that the performance of the proposed method is better than that of the manual tuning design method.

• 산업기술연구
• /
• 제20권B호
• /
• pp.115-123
• /
• 2000

There are many optimal design packages, but they are big ones and they have only a few kinds of optimal algorithm coded with Fortran and it is sometimes necessary for user to write down some codes into their packages. So it is hard for user to learn how to use and customize them. More over, there are no commercial home-made software for optimum design. So, in this paper, several famous optimum algorithms are coded and modulized with C++ which is known as a suitable computer language in order to build up more algorithms into one computer software. All algorithms developed with C++ here were tested for comparison with optimization tool box of MATLAB and are superior to MATLAB.