• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.3
• /
• pp.239-244
• /
• 2010

The purpose of this study was to identify mungbean (Vigna radiata L.) cultivars with appropriate characteristics for labor saving culture (whole crop feeding and combine harvesting), and to investigate seed quality in the southern South Korea. Cultivar Dahyeon exhibited strong lodging resistance, excellent disease tolerance, and greater pod numbers per plant resulting in higher yield. Cultivar Owool and Keumseong, the two most common mungbean cultivars in Korea, exhibited lower yield than Dahyeon due to weaker disease tolerance or lower pod numbers per plant. Cultivar Samgang demonstrated higher seed starch content, Jangan, Nampyeong, and Keumseong exhibited higher crude protein content, and Sohyeon exhibited higher vitexin and isovitexin contents. However, no statistical differences were found among the cultivars in crude fat content. Unsaturated fatty acid ranged from 51.8 to 57.2%, with saturated fatty acid ranging from 36.2 to 40.3%. We detected five unsaturated fatty acids including linoleic acid (36.1 to 38.6%), linolenic acid (10.3 to 14.7%), and oleic acid (2.7 to 4.6%), and seven saturated fatty acids including palmitic acid (28.7 to 30.9%), stearic acid (2.9 to 4.1%), and arachidic acid (1.5 to 3.7%). There were significant differences between the cultivars in amylogram properties of seeds: the Nampyeong cultivar exhibited a lower gelatinization temperature; Dahyeon was higher in peak viscosity and breakdown; and Sohyeon, Nampyeong, and Dahyeon were lower in setback.

• Economic and Environmental Geology
• /
• v.29 no.4
• /
• pp.421-428
• /
• 1996

The occurrence, optical property, chemical composition, crystal structure and formation environments of the phillipsite within deep-sea manganese nodules were systematically investigated in this study. Phillipsite in manganese nodules occurs in nucleus of nodules along with consolidated bottom sediments, weathered volcanic debris, and interstitial grains in the each layer of manganese encrusts. Phillipsite is predominantly pseudomorphs of volcanic shards, and occurs as white to pale yellow in color lath-shaped and equant crystals. These show aggregations of prismatic, blocky, and bladed of 2 to $20{\mu}m$ long, and 2 to $5{\mu}m$ thick. The simplified average chemical formula of phillipsite is $({Ca_{0.1}Mg_{0.3}Na_{1.1}K_{1.5}})_3{(Fe_{0.3}Al_{4.2}Si_{11.8})O_{32}{\cdot}10H_2O}$ with a very siliceous and alkalic. The $Si/(Al+Fe^{+3})$ ratio is 2.37 to 2.78 and alkalis greatly exceed the divalent exchangeable cations, and Na/K ratio is 0.59 to 0.81. The phillipsite is monoclinic ($P2_l/m$) with the unit-cell parameters, $a=10.005{\AA}$, $b=14.129{\AA}$, $c=8.686{\AA}$, ${\beta}=124.35^{\circ}$, and $V=1013.6{\AA}^3$. Phillipsites in manganese nodules formed apparently authigenically at a temperature less than $10^{\circ}C$, and they crystallized at a pressure of less than 0.7 kb, and pH of about 8 in deep-sea environments.

• Economic and Environmental Geology
• /
• v.51 no.1
• /
• pp.49-65
• /
• 2018

The lime-soil mixture on tomb barrier (LSMB) is a type of tomb in Joseon Dynasty, which made with so-called 'Sammul' (three material compound) that mixture of lime, fine sand and yellow ocher. This study divided the tombs of the Gungri Site from Joseon Dynasty with layered wall and integrated wall according to the manufacturing types, and investigated on the basis of analysis to material characteristics and making techniques. Analytical samples were classified with lime-soil mixtures and soils, and interpreted the mixing characteristics of Sammul based on types of tomb barrier. The tomb barrier which is directly effect to control the inner environment was made with high content of lime. But the finishing or bottom layer were made with low content of lime. Overall the LSMB with integrated wall has higher content of lime and physical property than the LSMB with layered wall. The soil which was compounded as a Sammul and collected near the Gungri Site had similar with mineralogical and geochemical characteristics. Therefore, it is presumed that the fine sand and yellow ocher that made as a Sammul, were used with soil that was distributed around the site. Meanwhile, large scale limestone quarry is distributed near the site. Especially, Gungri Site has a possibility of material supply through water transport, due to the sea route from Asan bay is connected near the site. Thus, there is the possibility of transportation of lime materials from nearby quarry.

• Journal of Information Management
• /
• v.43 no.3
• /
• pp.61-78
• /
• 2012

Internet is widely spreading in everyday life and it makes easy to find and share information on the Internet. Many of Internet users are copying and distributing copyrighted materials freely on the Internet without recognizing that it is unethical and illegal behavior. The rate of Internet piracy is constantly increasing even though the regulation and punishment for piracy behavior are to be strict. However, there is a lack of study about the relationship between the punishment and education for intenet piracy on users' attitude and intention toward piracy on the Internet. The purpose of this study is therefore to find out the effect of the level of punishment for internet piracy on users' attitude and intention. This study also examines the moderating effect of piracy education on the relationship between punishment and piracy intention. The study shows that the punishment is directly associated with the attitude but not associated with the piracy intention. The piracy education has a significant effect on the relationship between punishment and intention. The result of this study could bring up the issue of intellectual property protection on the Intenet and suggest an importance of piracy education to educators, managers and internet users.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.621-627
• /
• 2013

In order to apply eco-friendly poly(propylene carbonate) (PPC) into barrier packaging materials, six different PPC/exfoliated graphite (EFG) nanocomposite films with different EFG were successfully prepared by a solution blending method. Their water sorption behavior was gravimetrically investigated as a function of the EFG content and interpreted with respect to their chemical structure and morphology. The water sorption isotherms were reasonably well fitted by Fickian diffusion model, regardless of morphological heterogeneities. With increasing the EFG content, the diffusion coefficient and water uptake decreased from $12.5{\times}10^{-10}cm^2sec^{-1}$ to $7.2{\times}10^{-10}cm^2sec^{-1}$ and from 8.9 wt% to 4.2 wt%, respectively, which indicates that the moisture resistance capacity of PPC was greatly enhanced by incorporating EFG into PPC. The enhanced water barrier property of the PPC/EFG nanocomposite films with the high aspect ratio EFG makes them potential candidates for versatile packaging applications. However, to maximize the performance of the nanocomposite films, further researches are required to increase the compatibility of EFG in the PPC matrix.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.502-507
• /
• 2016

This study was conducted to develop novel antimicrobial nano-composites, with the aim of fully utilizing antimicrobial properties of multi-walled carbon nanotubes (MWCNTs), nickel (Ni) and zinc oxide (ZnO). Ni coated-MWCNTs (Ni-CNT) were prepared and evaluated for their potential application as an antimicrobial material for inactivating bacteria. Field emission scanning electron microscopy (FE-SEM), and X-ray energy dispersive spectroscopy (EDS) were used to characterize the Ni coating and morphology of Ni-CNT. Staphylococcus aureus (S. aureus) and Escherichia coil (E. coil) were employed as the target bacterium on antimicrobial activities. Comparing with the nitric acid treated MWCNTs and Ni-CNT which have been previously reported to possess antimicrobial activity towards S. aureus and E. coil, Ni-CNT/ZnO exhibited a stronger antimicrobial ability. The nickel coating was confirmed to play an important role in the bactericidal action of Ni-CNTs/ZnO composites. Also, the addition of ZnO to the developed nanocomposite is suggested to improve the antimicrobial property.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.22 no.1
• /
• pp.40-46
• /
• 2011

Background and Objectives : Vocal fold bowing is an organic voice disorder that is associated with an abnormal structure of the vocal folds whereas vocal fold polyp is a functional voice disorder caused by an abnormal use of the vocal folds. Both types of vocal folds share a common property in that they make one's voice breathy or strained. The purpose of this study is to compare voice from two types of vocal folds and to offer information of clinical importance. Materials and Method: Vocal fold bowing and vocal fold polyp groups consisted of 7 male subjects, respectively. All subjects recorded /a/ in the state of measuring MPT (maximum phonation time), repeating 3 times, by a voice recorder (48 kHz sampling rate; 24 bit quantization). They answered the questions of K-VHI. Time domain parameters (such as perturbation parameters including HNR, Jitter, etc.) were calculated for the whole duration of /a/ and those of the frequency domain were measured in initial 40 ms and stable 40 ms of /a/, respectively. Mann-Whitney V-test was used for the time domain parameters and K-VHI survey, and Wilcoxon signed rank test was applied to the frequency domain parameters (H1, H2, H1-H2). Results: For K-VHI survey and the time domain analysis, there was no significant difference between bowing and polyp group. For frequency domain analysis, H1 and H2 showed a significantly different result between two groups. Vocal fold bowing group has longer duration and lower intensity than that of vocal fold polyp group in the 'aspirated interval', which could be observable prior to ordinary vowel oscillation. Conclusion: Both groups seem to show breathy voice. This could be referred on the basis of the value of H1-H2. The K-VHI survey says that subjects with vocal fold bowing feel more uncomfortable than subjects with vocal fold polyp.

• Journal of Gifted/Talented Education
• /
• v.20 no.1
• /
• pp.175-203
• /
• 2010

Among many factors that affect the development of the talent of gifted children, the family factor that first finds and cultivates the talent of gifted children is quite important. The researches on the family of gifted children are mostly concentrated on physical environment out of the home environment, neglecting psychological environment. Although the recreational activity of family with gifted children considerably contributes to the emotional, intellectual and social development of gifted children themselves and to the improvement of life quality of the family members, the recreation of family with gifted children has not yet been studied. Thus, the objective of this research is to present basic materials for seeking the direction to educate parents and to support family with gifted children in order to encourage synergy effect in emotional and social growth of family with gifted children by surveying the property of recreation of family with gifted children. The result of result is as follows. First, the type of family with gifted children tends to be remarkably biased to 'family-oriented activity' and 'elf-development activity.' Second, verifying the significant level of motive for recreational activity of family with gifted children at the variables such as number of family members, parents' age, parents' education level, parents' occupation, etc, it was concluded that they were not statistically significant. The result of this research suggests that education and support for efficient recreation of family with gifted children is necessary to achieve healthy talent of gifted children.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.13-22
• /
• 2006

The geotextile have been used in filtration and drainage for over 30 years in many applications of civil and environmental projects. Geotextile tube is compound technology of filtration and drainage property of geotextile. Geotextile have been used for various types of containers, such as small hand-filled sandbags, 3-dimensional fabric forms for concrete paste, large soil and aggregate filled geotextile gabion, prefabricated hydraulically filled containers, and other innovative systems involving containment of soils using geotextile. They are hydraulically filled with dredged materials. It have been applied in coastal protection and scour protection, dewatering method of slurry, and isolation of contaminated material. Recently, geotextile tube technology is no longer alternative construction technique but suitable desired solution. This paper presents the behavior of geotextile tube composite structure by 2-D limit equilibrium and plane strain analysis. 2-D limit equilibrium analysis was performed to evaluate the stability of geotextile tube composite structure for the lateral load and also the plane strain analysis was conducted to determine the design and construction factors. Based on the results of this paper, the three types of geotextile tube composite structure is stable. And the optimum tensile strength of geotextile is 151kN/m and maximum pumping pressure is 22.7kN/m.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.157-169
• /
• 2009

The aim of this study was to evaluate effect of implant abutment screw coating treatment on joint stability, investigating mechanical properties of these. For this study used $ExFeel^{(R)}$ external hexed implant system and $15mm{\times}1mm$ discs. Experimental group was $1{\mu}m$ TiN, TiCN, TiC coated abutment screws and discs. To know mechanical property, i evaluated adhesion strength, surface hardness, using disc, corrosion test using screw. The results were as follows : rotation angle of coated screws increased than that of non-coated screw because of lower friction coefficient, especially TiC coated screw group had the largest value, but removal torque decreased in all coated screws (p<0.05). Torque loss before and after fatigue test was the smallest in TiC-coated screws, and the largest in non-coated screws (p<0.05), and there was no statistically significant difference between dry condition and wet condition of screws because of higher surface hardness and lower friction coefficient. From the above results, TiN, TiCN, TiC coating group had high abrasion resistance, especially TiC coated group which had low torque-consuming, high rotation angle as low friction coefficient will be considered to influence on implant abutment screw joint stability positively.