• 한국재료학회지
• /
• 제25권10호
• /
• pp.559-565
• /
• 2015

The ductile-brittle transition behavior of two austenitic Fe-18Cr-10Mn-N-C alloys with different grain sizes was investigated in this study. The alloys exhibited a ductile-brittle transition behavior because of an unusual brittle fracture at low temperatures unlike conventional austenitic alloys. The alloy specimens with a smaller grain size had a higher yield and tensile strengths than those with a larger grain size due to grain refinement strengthening. However, a decrease in the grain size deteriorated the low-temperature toughness by increasing the ductile-brittle transition temperature because nitrogen or carbon could enhance the effectiveness of the grain boundaries to overcome the thermal energy. It could be explained by the temperature dependence of the yield stress based on low-temperature tensile tests. In order to improve both the strength and toughness of austenitic Fe-Cr-Mn-N-C alloys with different chemical compositions and grain sizes, more systematic studies are required to understand the effect of the grain size on the mechanical properties in relation to the temperature sensitivity of yield and fracture stresses.

• 분석과학
• /
• 제15권5호
• /
• pp.417-426
• /
• 2002

반응셀이 장치된 유도결합플라스마 사중극자 질량분석기를 이용하여 자연적으로 존재하는 6개의 칼슘 동위원소의 검출특성에 관한 연구를 수행하였다. 동적반응셀 (dynamic reaction cell, DRC)장치를 이용한 실험에서 최적의 신호 대 잡음비를 얻기 위한 실험조건을 조사하였다. 본 실험을 통해서 반응기체로서 0.7 mL/min의 $NH_3$를 사용하고 rejection parameter (RPq)값을 0.6으로 사용함으로써, Ca의 질량위치인 m/z 40, 42, 43, 44, 46 그리고 m/z 48의 위치에서 잠재적인 간섭이온인 $Ar^+$, ${CO_2}^+$, ${NO_2}^+$, $CNO^+$ 등이 효과적으로 제거됨을 확인하였다. 검출한계는 동위원소 $^{40}Ca$, $^{42}Ca$, $^{43}Ca$, $^{44}Ca$, 및 $^{48}Ca$에 대해서 각각 1, 29, 169, 34, and 15 pg/g으로 얻을 수 있었다. 이러한 실험조건 하에서 국제비교분석을 위해서 영국의 LGC (Laboratory of the Government Chemistry, Queens Road, Teddington, England)로부터 공급된 합성식품분해물질 중의 Ca을 동위원소희석법을 적용하여 분석하였다. 동위원소희석법에 의한 측정의 불확도는 ISO/GUM과 EURACHEM지침서에 따라 평가하였다. 측정된 시료중의 Ca의 농도와 불확도는 ($66.4{\pm}1.2$) mg/kg이었다. 또한 본 실험방법의 유효성을 확인하기 위해 농도가 인증된 표준시료 NRCC (National Research Council of Canada)의 SLRS-3 (riverine water CRM)과 NIST (National Institute of Science and Technology)의 SRM1643d (trace element in water)를 분석하였다.

• 분석과학
• /
• 제25권1호
• /
• pp.25-32
• /
• 2012

동위원소희석 액체크로마토그래피-탄뎀질량분석법을 이용하여 차음료 중의 소르빈산을 정밀하게 측정하는 방법을 개발하였다. 소르빈산의 동위원소, $^{13}C_2$-소르빈산은 주문합성하여 구입하였다. 질량 분석기는 음이온 모드로 선택반응분석법 (Selected Reaction Monitoring mode)에서 수행하여, $[M-H]^-$ 이온이 $[M-CO_2H]^-$ 조각이온으로 가는 m/z 111 ${\rightarrow}$ 67와 $^{13}C_2$-소르빈산 m/z 113 ${\rightarrow}$ 68 채널을 선택하여 분석하였다. 분리는 C18 컬럼으로 수행되었으며, 암모니움 아세테이트용액(pH 4.5) 55%와 메탄올 45%로 이동상을 구성하였다. 반복성과 재현성을 포함한 방법의 유효성 검토를 위하여 본 연구원에서 차음료에 소르빈산을 강화하여 균질성있는 기준물질을 제조하였다. 반복성과 재현성 결과는 동위원소희석 액체크로마토그래피-탄뎀질량분석법에 의한 소르빈산의 분석이 신뢰할만 하며 재현성 있는 방법임을 보여주었고, 기준물질들의 소르빈산의 농도는 3.8%의 표준편차를 보여주었다.

• 분석과학
• /
• 제15권6호
• /
• pp.534-539
• /
• 2002

물 중에 극미량 존재하는 냄새 유발 물질인 geosmin (GSM)과 2-methylisoborneol (2-MIB)에 대한 GC/MS 분석법을 확립하였다. 시료는 n-헥산을 이용한 액체-액체 추출법(liquid-liquid extraction, LLE)으로 추출하였으며, GC/MS 방법으로 분석하였다. 이 추출법의 회수율은 GSM과 2-MIB에 대하여 각각 ($87{\pm}8$)%, ($78{\pm}8$)%로 측정되었으며, 이 분석법에 의한 정량한계는 두 물질 모두 ~0.3 ng/L로 매우 향상되었다. 이 분석방법을 일부 강물과 강물을 정수 처리한 실제 시료에 적용하였다. 일부 강물 원수의 경우 GSM과 2-MIB의 농도가 각각 최고 ($4.2{\pm}0.4$) ng/L와 ($44{\pm}4$)ng/L까지 나타났으며, 이 물은 정수 처리를 거친 후에도 ($1.3{\pm}0.1$) ng/L와 ($18{\pm}2$) ng/L의 농도를 보여 기존의 정수 처리로 냄새 물질에 대한 제거가 효과적이지 못함을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2962-2968
• /
• 2009

The photodissociation dynamics of 1,2-bromochloroethane ($C_2H_4BrCl$) was investigated near 234 nm. A two-dimensional photofragment ion-imaging technique coupled with a [2+1] resonance-enhanced multiphoton ionization scheme was utilized to obtain speed and angular distributions of the nascent Br($^2P_{3/2}$) and Br${\ast}($^2P_{1/2}$) atoms. The total translational energy distributions for the Br and Br${\ast}$ channels were well characterized by Gaussian functions with average translational energies of 100 and 84 kJ/mol, respectively. The recoil anisotropies for the Br and Br${\ast}$ channels were measured to be ${\beta}$ = 0.49 ${\pm}$ 0.05 for Br and 1.55 ${\pm}$ 0.05 for Br${\ast}$. The relative quantum yield for Br${\ast}$ was found to be ${\Phi}_{Br{\ast}}$ = 0.33 ${\pm}$ 0.03. The probability of nonadiabatic transition between A' states was estimated to be 0.46. The relevant nonadiabatic dynamics is discussed in terms of interaction between potential energy surfaces in Cs symmetry.

• 센서학회지
• /
• 제14권5호
• /
• pp.331-336
• /
• 2005

The influence of water molecule on the electrical properties of single-walled carbon nanotube field effect transistors (SWNT-FETs) was reported. Conductance suppression was observed with the increase of the humidity. This can be explained by doping of the SWNT-FETs, which has p-type semiconductor characteristic, with the water molecules acting as an electron donor. However, after 65 % of humidity, conductance of the SWNT-FETs started to increase again, due to the opening of electron channels. Upon annealing at $400^{\circ}C$ in Ar atmosphere, conductance increases more than 500 %, and the threshold voltage shifts toward further positive gate voltages. The results of this experiment support possible application of single-walled carbon nanotubes for humidity sensing material.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.48-52
• /
• 2019

Virtual metrology, which is one of APC techniques, is a method to predict characteristics of manufactured films using machine learning with saving time and resources. As the photoresist is no longer a mask material for use in high aspect ratios as the CD is reduced, hard mask is introduced to solve such problems. Among many types of hard mask materials, amorphous carbon layer(ACL) is widely investigated due to its advantages of high etch selectivity than conventional photoresist, high optical transmittance, easy deposition process, and removability by oxygen plasma. In this study, VM using different machine learning algorithms is applied to predict the thickness of ACL and trained models are evaluated which model shows best prediction performance. ACL specimens are deposited by plasma enhanced chemical vapor deposition(PECVD) with four different process parameters(Pressure, RF power, $C_3H_6$ gas flow, $N_2$ gas flow). Gradient boosting regression(GBR) algorithm, random forest regression(RFR) algorithm, and neural network(NN) are selected for modeling. The model using gradient boosting algorithm shows most proper performance with higher R-squared value. A model for predicting the thickness of the ACL film within the abovementioned conditions has been successfully constructed.

• 한국안전학회지
• /
• 제36권3호
• /
• pp.7-14
• /
• 2021

Hybrid laminated Al/carbon-fiber-reinforced plastic (CFRP) composites are attracting considerable attention from industries such as aerospace and automobiles owing to their excellent specific strength and specific rigidity. However, when this material is used to fabricate high-pressure fuel storage containers subjected to repeated fatigue loads, fatigue life evaluation for the working load is regulated as an important criterion for operational safety and ease of maintenance. Among the existing evaluation methods for these vessels, the burst test and the hydraulic repeat test require expensive facilities. Thus, the present study aims to develop an improved fatigue life test for Al/CFRP laminated hybrid composites. The test specimen was manufactured using a curved mold considering the shape of a type III high-pressure storage container. The strain-life method was used for fatigue life evaluation, and the life was predicted based on the transition life. The results indicate that the more complex the CFRP stacking sequence, the longer is the transition life. This test method is expected to be useful for ensuring the fatigue safety and economy of hybrid laminate composites.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.462-468
• /
• 2022

The selection and effective utilization of peak-fitting software for conventional gamma-ray spectrum analysis is significant for accurate determination of the mass fraction of elements, particularly in complex peak regions. Majority of the peak-fitting programs can derive similar peak characteristics for singlet peaks, but very few programs can deconvolute multi-peaks in a complex region. The deconvolution of multi-peaks requires special peak-fitting functions, such as left and right-skew distributions. In the this study, 843.76 keV (²⁷Mg) peak area from the complex region (840 keV-850 keV) determined and compared using four different peak-fitting programs, namely, GammaVision, Genie2000, HyperLab, and HyperGam. The 843.76 keV peak interfered with 841.63 keV (^152mEu) and 846.81 keV (⁵⁶Mn). The total Mg concentration was determined through k₀-instrumental neutron activation analysis by applying the isotopic interference correction factor ²⁷Al(n,p)²⁷Mg through the simultaneous determination of Al concentration. HyperLab and HyperGam peak-fitting programs reported consistent peak areas, and resultant concentrations agreed with the certified values of matrix-certified reference materials.

• Journal of Information Technology Applications and Management
• /
• 제29권6호
• /
• pp.1-12
• /
• 2022

In recent years, technological competition in the automobile sector is accelerating. This study analyzes the status of patents from a global perspective of three promising future items that Korea has selected as core technologies in the field of autonomous driving,. And the technological cooperation ecosystem was identified through network analysis centered on scientific metrology. As a result of the analysis, it was confirmed that the growth of individual technologies has been strengthened in recent years, and although key source technologies have been largely preempted in major global countries, a close cooperative ecosystem between institutions, companies, and universities in major countries has not yet been formed. Specifically, the US and Japan have the technological leadership, while China is rapidly rising, and Korea is chasing after it as a latecomer. Therefore, it is necessary to continuously strengthen technological cooperation such as R&D of core technology to overcome technological limitations and strengthening of infrastructure construction, attracting excellent foreign talents and international exchanges. This analysis is meaningful in that it explores the global status of Korea's technology and the possibility of technological cooperation from various perspectives in the future from the viewpoint of preoccupation of future technology, rather than grasping the trend of a specific technology.