• E2M - 전기 전자와 첨단 소재
• /
• 제9권7호
• /
• pp.719-726
• /
• 1996

DLTS measurements were performed to study the annealing induced changes of the trap centers in MOV and to shed more light on the stability mechanism of the MOV. Two electron traps, Ec-0.26[eV] and Ec-(O.2-0.3)[eV], were observed in the unannealed samples in large quantities(7-9 X 1014[CM 3]), whereas the three electron traps Ec-0.17 [eV], Ec-0.26[eV] and Ec-(O.2-0.3)[eV] were observed far less in the annealed samples. The minima in the Ec-0.26[eV] trap density, coupled with the presented results that unannealed devices are unstable whereas 600.deg. C annealed devices are most stable, suggests that the instability of the MOV under long term electrical stressing is related to the Ec-0.26[eV] trap. This results support that the ion migration model for the device instability where the Ec-0.26[eV] defects may be the interstitial zinc or the migrating ions. The interstitial zinc originated as a result of the nonstoichiometric nature of ZnO might cause the degradation of the I-V characteristics of the MOV with long term electrical stressing.

• Natural Product Sciences
• /
• 제27권3호
• /
• pp.151-160
• /
• 2021

Under some pathological conditions such as osteoarthritis, matrix metalloproteinases (MMPs) including MMP-13 have an important role in degrading cartilage materials. When the regulatory effects of some herbal extracts on MMP-13 expression were examined to evaluate the cartilage-protective potential, the ethanol extract of the radix of Viscum album was found to strongly downregulate MMP-13 induction in IL-1β-treated chondrocytes, SW1353 cells. Based on this finding, activity-guided separation was carried out, which yielded five constituents identified as 3,5-dihydroxy-1,7-bis(4-hydroxyphenyl)heptane (1), hesperetin-7-glucoside (2), syringin (3), homoflavoyadorinin B (4), and 4,4'-dihydroxy-3,6'-dimethoxychalcone-2'-glucoside (5). Of these, 1 and 5 significantly inhibited MMP-13 expression in SW1353 cells, with 5 being the most potent. Compound 5, a chalcone derivative, showed the downregulation of MMP-13 at 20 - 100 μM. The mechanism study revealed that 5 exerted MMP-13 down-regulatory action, at least in part, by interrupting the signal transducer and activator of transcription 1 (STAT1) activation pathway. Furthermore, this compound protected against cartilage degradation in an IL-1-treated rabbit cartilage explant culture. All these findings demonstrated for the first time that Viscum album and its constituents, especially chalcone derivative (5), possessed cartilage-protective activity. These natural products may have the potential for alleviating cartilage degradation.

• International Journal of Oral Biology
• /
• 제46권2호
• /
• pp.74-80
• /
• 2021

Autophagy is an evolutionarily well-conserved cellular homeostasis program that responds to various cellular stresses and degrades unnecessary or harmful intracellular materials in lysosomes. Accumulating evidence has shown that autophagy dysfunction often results in various human pathophysiological conditions, including metabolic disorders, cancers, and neurodegenerative diseases. The discovery of an autophagy machinery protein network has revealed underlying molecular mechanisms of autophagy, and advances in the understanding of its regulatory mechanism have provided novel therapeutic targets for treating human diseases. Recently, reports have emerged on the involvement of autophagy in oral squamous cell carcinoma (OSCC). Although the role of autophagy in cancer therapy is controversial, the beneficial use of the induction of autophagic cell death in OSCC has drawn significant attention. In this review, the types of autophagy, mechanism of autophagosome biogenesis, and modulating molecules and therapeutic candidates affecting the induction of autophagic cell death in OSCC are briefly described.

• 한국수소및신에너지학회논문집
• /
• 제1권1호
• /
• pp.1-8
• /
• 1989

The hydriding kinetic mechanism and the change of the hydriding reaction rate of $MmNi_{4.5}Al_{0.5}$ during the thermally induced hydrogen absorption-desorption cycling are investigated. Comparison of the reaction rate data which are obtained by the pressure sweep method with the theoretical rate equations suggests that the hydriding rate controlling step has changed from the dissociative chemisorption of hydrogen molecules at the surface to the hydrogen diffusion through the hydride phase with the increase of the hydriding fraction. These hydriding kinetic mechanism is not changed during the cycling. However, the intrinsic hydriding reaction rate of $MmNi_{4.5}Al_{0.5}$ after 5500 cycles increases significantly comparing with the activated one. It is suggested that the change of the hydriding kinetic behavior due to intrinsic degradation of $MmNi_{4.5}Al_{0.5}$ can be interpreted as follows ; the formation of nickel cluster at the surface of the sample and the host metal atom exchange in bulk by thermal cycling.

• 한국재료학회지
• /
• 제32권8호
• /
• pp.339-344
• /
• 2022

The lattice oxygen mechanism (LOM) is considered one of the promising approaches to overcome the sluggish oxygen evolution reaction (OER), bypassing -OOH^* coordination with a high energetic barrier. Activated lattice oxygen can participate in the OER as a reactant and enables O^*-O^* coupling for direct O₂ formation. However, such reaction kinetics inevitably include the generation of oxygen vacancies, which leads to structural degradation, and eventually shortens the lifetime of catalysts. Here, we demonstrate that Se incorporation significantly enhances OER performance and the stability of NiFe (oxy)hydroxide (NiFe) which follows the LOM pathway. In Se introduced NiFe (NiFeSe), Se forms not only metal-Se bonding but also Se-oxygen bonding by replacing oxygen sites and metal sites, respectively. As a result, transition metals show reduced valence states while oxygen shows less reduced valence states (O^-/O₂^2-) which is a clear evidence of lattice oxygen activation. By virtue of its electronic structure modulation, NiFeSe shows enhanced OER activity and long-term stability with robust active lattice oxygen compared to NiFe.

• 폴리머
• /
• 제29권1호
• /
• pp.54-58
• /
• 2005

미생물 합성 poly[(R)3-hydroxybutyrate]](P(3HB))의 알칼리 및 효소 분해거동을 단결정과 Langmuir 단분자막을 모델시스템으로 하여 연구하였다. 단결정의 초기효소 및 알칼리 분해거동은 단결정의 장축에 대해 수직방향(b축)으로 분해가 일어났고 용융점 이하의 온도에서 열처리 또한 단결정의 b축을 따라 봉우리 형태의 형태학적 변화를 관찰하였다. 이러한 결과는 라멜라 단결정은 b축을 따라 불규칙한 영역을 가지고 있음을 의미하고 효소분해가 불규칙한 영역에서 선호적으로 일어난다고 설명할 수 있다. 한편, P(3HB), 단분자막의 효소 및 알칼리 분해경향은 분해매체와 표면압력에 크게 의존하였다. 알칼리 분해의 경우 낮은 표면압력에서도 분해를 나타내는 반면 효소 분해는 높은 표면 압력 하에서 분해거동을 나타내었다. 이러한 현상은 분자수준의 크기인 알칼리 분해매체는 P(3HB) 단분자막과 좁은 접촉면적(낮은 표면압력)에서도 활성을 보이는 반면 크기가 큰 분해효소는 보다 큰 활성 접촉면적(높은 표면압력)을 필요로 하는 것으로 판단된다.

• 대한기계학회논문집
• /
• 제16권3호
• /
• pp.598-607
• /
• 1992

본 연구에서는 고온중 장시간 사용중에 일어나는 야금학적 성질의 변화의 추 원인인 특정 탄화물을 비파괴적으로 검출하기 위해, 최근에 연구 되고 있는 전기화학 적 방법을 응용하기 위한 기초연구이다. 한편으로는 비파괴적 방법의 실험실적 연구 를 현장에 응용시키기 위한 시도를 행하고, 본 연구 결과를 이용한 향후 설비 진단 시 스템의 개요를 고찰해 보인다.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.9-16
• /
• 2005

This paper presents the development of new anisotropic conductive adhesives with enhanced thermal conductivity for the wide use of adhesive flip chip technology with improved reliability under high current density condition. The continuing downscaling of structural profiles and increase in inter-connection density in flip chip packaging using ACAs has given rise to reliability problem under high current density. In detail, as the bump size is reduced, the current density through bump is also increased. This increased current density also causes new failure mechanism such as interface degradation due to inter-metallic compound formation and adhesive swelling due to high current stressing, especially in high current density interconnection, in which high junction temperature enhances such failure mechanism. Therefore, it is necessary for the ACA to become thermal transfer medium to improve the lifetime of ACA flip chip joint under high current stressing condition. We developed thermally conductive ACA of 0.63 W/m$\cdot$K thermal conductivity using the formulation incorporating $5 {\mu}m$ Ni and $0.2{\mu}m$ SiC-filled epoxy-bated binder system to achieve acceptable viscosity, curing property, and other thermo-mechanical properties such as low CTE and high modulus. The current carrying capability of ACA flip chip joints was improved up to 6.7 A by use of thermally conductive ACA compared to conventional ACA. Electrical reliability of thermally conductive ACA flip chip joint under current stressing condition was also improved showing stable electrical conductivity of flip chip joints. The high current carrying capability and improved electrical reliability of thermally conductive ACA flip chip joint under current stressing test is mainly due to the effective heat dissipation by thermally conductive adhesive around Au stud bumps/ACA/PCB pads structure.

• 한국수소및신에너지학회논문집
• /
• 제14권1호
• /
• pp.46-52
• /
• 2003

유황 양 전극과 액체 전해질, 리튬 금속을 음극으로 사용한 리튬 유황 전지를 제조하여 그 특성을 조사하였다. 유황 전극은 유황파우더와 carbon black 을 도전재로, 그리고 바인더로 PVdF를 사용하여 제조하였다. 이렇게 제조된 셀은 두개의 다른 전압 구간에서 충방전 실험을 행하였다. 첫 번째 셀은 $S_8+{\chi}Li{\leftrightarrow}Li_2S_x(X=4{\sim}12)$ 반응만을 일어나 게 하기 위하여 2.1V 와 2.5V 사이에서, 그리고 두 번째 셀은 $Li_2S_x+{\chi}Li{\leftrightarrow}Li_2S(x=2{\sim}4)$의 반응만을 일어나게 하기 위하여 1.5V 와 2.5V 에서 충방전 하였다. 그 결과 첫 번째 셀이 더 좋은 싸이클 특성을 가지는 것을 확인 탈 수 있었다. 각 전압구간에서 각 셀이 충방전 되는 동안, 전해질 내로 녹아난 유황의 양은 큰 차치가 없는 것을 확인하였다. 그리고, 전압에 따른 전극의 임피던스를 측정한 결과, 방전이 끝난 후 큰 저항성분이 새로 생긴 것을 확인 할 수 있었다. 이는 사이클이 진행된 후의 전극표면을 SEM 분석을 행한 결과로부터 사이클이 진행된 후 전극 표면에 최종 반응 산물인 $Li_2S$ 가 피막형태로 형성된것을 확인 할 수 있었다.

• Applied Microscopy
• /
• 제43권2호
• /
• pp.88-97
• /
• 2013

Technical investigation to figure out the problems arising during in-situ heating electron backscatter diffraction (EBSD) analysis inside scanning electron microscopy (SEM) was carried out. EBSD patterns were successfully acquired up to $830^{\circ}C$ without degradation of EBSD pattern quality in steels. Several technical problems such as image drift and surface microstructure pinning were taking place during in-situ experiments. Image drift problem was successfully prevented in constant current supplying mode. It was revealed that the surface pinning problem was resulted from the $TiO_2$ oxide particle formation during heating inside SEM chamber. Surface pinning phenomenon was fairly reduced by additional platinum and carbon multi-layer coating before in-situ heating experiment, furthermore was perfectly prevented by improvement of vacuum level of SEM chamber via leakage control. Plane view in-situ observation provides better understanding on the overall feature of recrystallization phenomena and cross sectional in-situ observation provides clearer understanding on the recrystallization mechanism.