• 한국건축시공학회지
• /
• 제24권3호
• /
• pp.319-329
• /
• 2024

본 연구에서는 국내외 단위수량 규정을 조사하고 현장 타설 콘크리트의 단위수량을 평가하였다. 콘크리트 품질을 타이틀로 하여 핵심 단어 시각화했을 때 단위수량이 높은 중요도를 가짐을 확인할 수 있었다. 또한 단위수량 관리 및 단위수량 측정 방법에서 한국과 일본 간 상대적으로 큰 차이가 나타나지 않음을 알 수 있었다. 현장에 반입된 콘크리트의 단위수량을 단위용적질량법을 이용하여 계산한 결과, 현장에서 임의로 채취한 샘플에서 단위수량이 불균일하고 가변적이며, 단위수량이 적정 단위수량 기준을 초과하는 결과를 확인할 수 있었다. 현장 타설 콘크리트의 품질관리를 위해서는 레미콘 업체, 건설업체, 검사관이 단위수량에 대한 엄격한 기준을 준수하는 것이 중요하며, 명확한 단위수량 측정 매뉴얼 제공과 철저한 교육, 주기적인 현장 점검 등 보다 체계적이고 실용적인 시스템 구축이 필요하다고 판단된다.

• Journal of Cerebrovascular and Endovascular Neurosurgery
• /
• 제25권3호
• /
• pp.275-287
• /
• 2023

Objective: Flow diverting stents (FDS) are a validated device in the treatment of intracranial aneurysms, allowing for minimally invasive intervention. However, after its approval for use in the United States in 2011, post-market surveillance of adverse events is limited. This study aims to address this critical knowledge gap by analyzing the FDA Manufacturer and User Facility Device Experience (MAUDE) database for patient and device related (PR and DR) reports of adverse events and malfunctions. Methods: Using post-market surveillance data from the MAUDE database, PR and DR reports from January 2012-December 2021 were extracted, compiled, and analyzed with R-Studio version 2021.09.2. PR and DR reports with insufficient information were excluded. Raw information was organized, and further author generated classifications were created for both PR and DR reports. Results: A total of 2203 PR and 4017 DR events were recorded. The most frequently reported PR adverse event categories were cerebrovascular (60%), death (11%), and neurological (8%). The most frequent PR adverse event reports were death (11%), thrombosis/thrombus (9%) cerebral infarction (8%), decreased therapeutic response (7%), stroke/cerebrovascular accident (6%), intracranial hemorrhage (5%), aneurysm (4%), occlusion (4%), headache (4%), neurological deficit/dysfunction (3%). The most frequent DR reports were activation/positioning/separation problems (52%), break (9%), device operates differently than expected (4%), difficult to open or close (4%), material deformation (3%), migration or expulsion of device (3%), detachment of device or device component (2%). Conclusions: Post-market surveillance is important to guide patient counselling and identify adverse events and device problems that were not identified in initial trials. We present frequent reports of several types of cerebrovascular and neurological adverse events as well as the most common device shortcomings that should be explored by manufacturers and future studies. Although inherent limitations to the MAUDE database are present, our results highlight important PR and DR complications that can help optimize patient counseling and device development.

• 한국의상디자인학회지
• /
• 제26권3호
• /
• pp.13-33
• /
• 2024

This study aims to analyze the potential and limitations of using traditional men's suits as upcycled materials by examining case studies of deconstructed and reassembled designs. The research explores the potential of upcycled suit design and proposes data to guide future directions in upcycling. A literature review was conducted, revealing that upcycled designs are often created through deconstruction, within the framework of Jacques Derrida's deconstructionist philosophy. The study examined 10 brands that focused on suit-based upcycled designs across two or more seasons, resulting in 202 upcycled suit products for analysis to identify key design characteristics. Upcycle suits have been shown to be disordered decentralized properties through deformation, discontinuity through deformation, and damage through reconstruction of existing suits. First, deformation was expressed in the design of a typical dressing, asymmetry, overlap, distortion, and repetition. Second, deformation mainly appeared as a method of omission, heterogeneous insertion, material conversion, and separation. Third, damage appeared as a doodle, tear, and incomplete up-cycle design method. Using these methods, three decentralized upcycle suit designs were developed, and a new direction of upcycle design was suggested. The study concludes that upcycled suit design can contribute to sustainable fashion by achieving zero waste, developing refined sewing techniques, pursuing diverse design methods, and promoting transparency in production. This research offers insights into innovative and diverse product development through the reinterpretation of discarded suits.

• 산업과 과학
• /
• 제3권3호
• /
• pp.14-19
• /
• 2024

현재 마이크로 LED (Light Emitting Diode)는 디스플레이와 함께 조명 분야에서 관심을 받고 있으며, 높은 휘도, 빠른 동작 속도, 에너지 효율, 오랜 시간 동작 등의 장점을 가지고 있다. 스마트폰, 텔레비젼, 웨어러블 전자소자 등에서 새로운 혁신을 불러올 것으로 예측된다. 이러한 마이크로 디스플레이는 마이크로미터 크기의 LED 소자들로 이루어진 픽셀로 구현되며, 자체적으로 빛을 내는 자체발광형 디스플레이다. 주요 제조 공정으로는 결정성장, 패터닝과 식각, 칩 분리와 전사, 본딩과 배선, 패널 조립과 봉지, 검사와 품질 관리 등으로 구분할 수 있다. 최근 몇 년 동안 이 기술은 빠른 속도로 발전했으며, 기업들이 이러한 분야에의 투자를 확대하고 있다. 최신 시장 조사 결과에 의하면, 마이크로 LED 디스플레이 시장은 지속적으로 성장할 것으로 관측되고 있으며, 주요 발전 방향은 제조공정 개선, 소재 혁신, 구동 기술 발전 등으로 요약할 수 있다. 이러한 연구를 통해 상용화가 가속화되어 높은 성능과 다양한 응용 가능성으로 디스플레이 산업의 혁신을 이끌 것이라 판단된다.

• 한국결정성장학회지
• /
• 제34권5호
• /
• pp.163-172
• /
• 2024

백색 발광 다이오드(W-LED)는 기존의 광원에 비해 소형, 고효율, 긴 수명의 장점으로 디스플레이 및 조명에 널리 사용되고 있다. 결정화유리는 비정질 유리를 가열하여 결정화를 유도한 소재로, 다양한 고성능 분야에 적용되며, 핵형성제 추가나 상분리 현상을 통해 특성을 조절할 수 있다. 나노미터 크기의 결정을 형성하면 가시광선에서 투명성을 유지하면서도 결정화유리의 특성을 보존할 수 있어 광 스위치, 광 변환기, 레이저, 의료 기기, 센서 등 다양한 응용 분야에 적합하다. 또한, 희토류, 전이 금속, 양자점, 나노결정을 포함한 결정화유리는 청색 또는 자외선을 가시광선으로 변환하여 W-LED의 성능을 개선시킬 수 있다. 본 논문은 산화물계 및 불화물계 유리로부터 얻어진 결정화유리의 광학적 특성, W-LED로의 활용 가능성 및 최근 연구 동향을 탐구하였다.

• 패션비즈니스
• /
• 제6권1호
• /
• pp.137-154
• /
• 2002

It's not easy to renew old brand of over 50 years history to the tastes of new consumer of our time. Most of national brands that has a history of some 20 years in Korea have strove for continuation and growth of brand to no avails, which can be taken as a good example of current situation. For instance, C company, one of the National brand of US which has a history of 51 years, has made its position secure as a fashion group and based itself on a sound foundation by establishing new marketing strategy and completing successful brand renewal in the process of strategic M&A with Italian company. Those successful marketing strategies are as follows. 1) they regarded both market and consumer oriented marketing activity as company's highest priority strategy and put great emphasis upon concentration on target market and reestablishment of brand image of business casual wear. 2) Setting up and operating planning team composed of merchandizer alone in Milano, they set the direction of plan on the basis of concentrated research on potential item in market according to thorough market research done by buying office in Korea, branch office in Hong Kong and buyer in US prior to blueprint planning for season. 3) Great emphasis was placed on business which focused on intensive presentation of basic key item for apparel career women who are main consumer group in the midium-low prices market in US and on supplementation of size and color. they named this line 'collectibles' and helped their customer develop their own clothes plan without worrying about the change of color and fabric by supporting same fabric and color throughout the year and enabled them to add variation easily by supplementing new trend item. 4) Company set black as a main color that lots of apparel career women find easy to care and to express their own image and presented them with pebble which belongs to navy and beige and added fashion color such as wine and brown etc as season goes by. They constructed basic line in order for their customers to coordinate purchased item with new one or to add them to present collection, and to achieve efficient sale by setting up strategy which allows this cross coordination and changing pattern occasionally. 5) Though basic jacket for 99$, short slim skirt for 49$ are products within midium-low prices range, in the material planning stage aiming at production of item that has both resonable function appealing to consumer and is fashionable, synthetic material had to be used as a main source due to price competitiveness. Despite this situation, considering comfortable sense of fit and refined drape of silhouette that has no sign of cheap material, whole collectible line was divided into two items, which contributed to reduction of cost. In case of material that is composed of triacetate and polyester in 70 to 30 ratio, was used up to 4 million yard, which allowed drastic curtailment of cost accompanied by concentration. In case of 'collectibles' line, using Korean material mainly, C company chose to have their product sewed in Southeast Asian countries where transportation is well developed and both productivity and quality verified by operating global production system which aiming at cutdown of cost through outsourcing production from the country where labor cost is low and getting finished product. Polarization between present consumers telling us that consumers with the mind of middle classes in the past no longer exists between consumers who seek after only fine article of highest quality and wise consumers who are sensible enough to judge bubble on correlation between price and quality. To cope with this change in new consumer mind, apparel makes changing their policy so as to produce item that has reasonable quality and falls within affordable price range anywhere in the world. and they're striving to get out of difficult situation by operating global marketing strategy which stresses separation of planning, production and sale and sensibility of fashion shared worldwide. The marketing strategy of C company can be exemplified as a successful one.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.23-23
• /
• 2009

GaN-based nitride semiconductors have attracted considerable attention in high-brightness light-emitting-diodes (LEDs) and laser diodes (LDs) covering from green to ultraviolet spectral range. LED and LD heterostructures are usually grown on (0001)-$Al_2O_3$. The large lattice mismatch between $Al_2O_3$ substrates and the GaN layers leads to a high density of defects(dislocations and stacking faults). Moreover, Ga and N atoms are arranged along the polar [0001] crystallographic direction, which leads to spontaneous polarization. In addition, in the InGaN/GaN MQWs heterostructures, stress applied along the same axis can also give rise to piezoelectric polarization. The total polarization, which is the sum of spontaneous and piezoelectric polarizations, is aligned along the [0001] direction of the wurtzite heterostructures. The change in the total polarization across the heterolayers results in high interface charge densities and spatial separation of the electron and hole wave functions, redshifting the photoluminescence peak and decreasing the peak intensity. The effect of polarization charges in the GaN-based heterostructures can be eliminated by growing along the non-polar [$11\bar{2}0$] (a-axis) or [$1\bar{1}00$] (m-axis) orientation instead of thecommonly used polar [0001] (c-axis). For non-polar GaN growth on non-polar substrates, the GaN films have high density of planar defects (basal stacking fault BSFs, prismatic stacking fault PSFs), because the SFs are formed on the basal plane (c-plane) due to their low formation energy. A significant reduction in defect density was recently achieved by applying blocking layer such as SiN, AlN, and AlGaN in non-polar GaN. In this work, we were performed systematic studies of the defects in the nonpolar GaN by conventional and high-resolution transmission electron microscopy.

• 대한핵의학회지
• /
• 제25권2호
• /
• pp.286-293
• /
• 1991

$^{123}I$, which is applied for the thyroid and other in vivo kinetic study, has a special role in life sciences. The 159 KeV $\gamma-ray$ from $^{123}I$ is almost ideally appropriate for the current imaging instrumentation. Its decay mode (electron capture) and short half-life (13.3 hr) reduced the burden of radiation dose to the patients, and its chemical property makes it easy to synthesize the labelling compounds. In this experiment, the production of $^{123}I$ via the nuclear reaction $^{124}Te(p,2n)^{123}I$ with 28 MeV protons was sutdied. $TeO_2$ is used as a target material, because it has good physical properties. The target was prepared with $TeO_2$ powder and was molten into a ellipsoidal cavity (a=14 mm, b=10 mm, $270.8mg/cm^2$ thick) of pure platinum. The irradiation was carried out in the external proton beam with incident energies range from 28 MeV to 22 MeV, and current was $30{\mu}A$. The loss of $TeO_2$ target was significantly reduced by using $4\pi-cooling$ system in irradiation. The dry distillation method was adopted for the separation of $^{123}I$ from irradiated target, and when it was kept 5 minutes at $780^{\circ}C$, its result was quantitative. The loss of the target material $(TeO_2)$ was below 0.2% for each production run and $^{123}I$ from the dry distillation apparatus was captured with 0.01 N NaOH in $Na^{123}I$ form, then the pH of the solution was adjusted to $7.5\sim9.0$ with HC1/NaOH. The $Na^{123}I$ solution was passed through $0.2{\mu}m$ membrane filter, and sterilized under high pressure and temperature for 30 minutes. The production of $^{123}I$ is acceptable for clinical application based on the quality of USP XXI.

• 공업화학
• /
• 제26권2호
• /
• pp.234-238
• /
• 2015

모델 콜타르 유분 중에 함유된 질소고리화합물(NHC)의 분리를 메탄올과 포름아마이드 추출에 의해 비교했다. 원료로서는 4종류의 NHC (NHCs : 퀴놀린, 이소퀴놀린, 인돌, 퀴날딘), 3종류의 2환 방향족 화합물(BACs : 1-메틸나프탈렌, 2-메틸나프탈렌, 디메틸나프탈렌), 비페닐과 페닐에테르로 제조한 모델 콜타르 유분을 사용했다. 용매로서는 메탄올과 포름아마이드 수용액을 사용했다. 원료와 용매의 접촉 장치로서는 회분 교반기를 사용했다. 사용한 용매와 무관하게, 초기 용매 함수율의 감소와 평형조작 온도의 상승은 NHCs의 분배계수를 급격히 증가시켰으나, 역으로 BACs를 기준한 NHCs의 선택도를 감소시켰다. 초기 용매/원료의 체적비가 감소함에 따라 NHCs의 분배계수는 감소했으나, BACs를 기준한 NHCs의 선택도는 거의 일정했다. 동일한 실험조건에서, NHCs의 분배계수는 메탄올 추출이 포름아마이드 추출에 비해 약 3~5배 높았으나, BACs를 기준한 NHCs의 선택도는 역으로 포름아마이드 추출이 메탄올 추출에 비해 3~7배 높았다. 또한, NHCs의 용해력과 선택도의 밸런스에 NHCs의 추출처리속도를 부가하여 두 용매 추출법을 비교했다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.140-147
• /
• 2011

The strength properties of wooden retaining wall which was made with pitch pine were evaluated. Wooden retaining wall was made with diameter 90 mm of pitch pine round posts treated with CUAZ-2 (Copper Azole). The length of the front stretcher of the retaining wall was 3,000 mm. The distance between the headers (the notched member) is 1,000 mm in center and is 900 mm in side. There were connections every 2,000 mm because actually the length of stretcher is limited in the retaining wall. The strength test was carried out according to connection type because the section between stretchers can act as a defect. A result of the strength test according to connection type confirms that connection does not act as defect because the strength of retaining wall in single stretcher is similar to that in the section between stretchers. The strength test of the wooden retaining wall was carried out in 5 types according to the condition of the base section. When the upper soil pressure was 9.8 kN/$m^2$, the maximum load of the retaining wall fixing the front foundation shows higher values than those of others. But the total deformation is lower in the retaining wall not to fix a base section than in that to fix a base section. It is thought that the retaining wall not to fix a base section shows low value because the deformation is distributed throughout the retaining wall and it is confirmed that the soil pressure affects supporting the structure because the deformation of the retaining wall under low pressure is 3~4 fold higher than those of others. The failure mode of the retaining wall is the overturning type because the high section is deformed. Mostly, the failure mode is the separation of the header in the notched section.