• Coupled systems mechanics
• /
• 제12권1호
• /
• pp.41-68
• /
• 2023

The present work is concerned with the study of the influence of inhomogeneous initial stresses in a hollow cylinder containing a compressible inviscid fluid on the propagation of axisymmetric longitudinal waves propagating in this cylinder. The study is carried out using the so-called three-dimensional linearized theory of elastic waves in bodies with initial stresses to describe the motion of the cylinder and using the linearized Euler equations to describe the flow of the compressible inviscid fluid. It is assumed that the inhomogeneous initial stresses in the cylinder are caused by the internal pressure of the fluid. To solve the corresponding eigenvalue problem, the discrete-analytic solution method is applied and the corresponding dispersion equation is obtained, which is solved numerically, after which the corresponding dispersion curves are constructed and analyzed. To obtain these dispersion curves, parameters characterizing the magnitude of the internal pressure, the ratio of the sound velocities in the cylinder material and in the fluid, and the ratio of the material densities of the fluid and the cylinder are introduced. Based on these parameters, the influence of the inhomogeneous initial stresses in the cylinder on the dispersion of the above-mentioned waves in the considered hydro-elastic system is investigated. Moreover, based on these results, appropriate conclusions about this influence are drawn. In particular, it is found that the character of the influence depends on the wavelength. Accordingly, the inhomogeneous initial stresses before (after) a certain value of the wavelength lead to a decrease (increase) of the wave propagation velocity in the zeroth and first modes.

• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1065-1075
• /
• 2017

본 연구는 고속충돌에 따른 파괴로 인하여 발생한 파편들의 분산거동을 예측하기 위해 고속충돌 실험과 함께 재료거동 모델링 및 수치해석을 수행하였다. 알루미늄 합금과 강철로 각각 구성된 2종류의 위협체 및 표적판에 대해 충돌실험을 수행하였으며 위협체는 약 1 km/s의 속력으로 표적판과 충돌하고, 이 충돌로 인하여 발생한 파편은 알루미늄 합금 관측판에 손상을 유발시키게 하였다. 사용된 소재의 차이에 의해 파편의 분산거동이 상이하였으며 이에 따라 관측판에 형성된 파편의 분산 반경 또한 다름을 확인하였다. 수치해석은 실험과 동일한 조건하에서 수행되었으며 파편으로 인한 파괴 및 손상을 모사하기 위하여 입자완화 유체동역학(smoothed particle hydrodynamics, SPH)기법과 유한요소(finite element, FE) 연계 기법을 적용하였다. 실험 측정된 결과와 해석값을 비교분석한 바, 표적판의 관통부 지름과 관측판상의 파편 분산반경은 5 % 이내의 오차로 잘 일치하였다. 아울러 강철 위협체와 강철 표적판이 충돌한 경우 가장 큰 분산반경을 보임에 따라 타 경우에 비해 가장 위협적임을 알 수 있었다.

• Steel and Composite Structures
• /
• 제33권5호
• /
• pp.699-716
• /
• 2019

In this paper, wave propagations in sigmoid functionally graded (S-FG) plates are studied using new Higher Shear Deformation Theory (HSDT) based on two-dimensional (2D) elasticity theory. The current higher order theory has only four unknowns, which mean that few numbers of unknowns, compared with first shear deformations and others higher shear deformations theories and without needing shear corrector. The material properties of sigmoid functionally graded are assumed to vary through thickness according sigmoid model. The S-FG plates are supposed to be imperfect, which means that they have a porous distribution (even and uneven) through the thickness of these plates. The governing equations of S-FG plates are derived employed Hamilton's principle. Using technique of Navier, differential equations of S-FG in terms displacements are solved. Extensive results are presented to check the efficient of present methods to predict wave dispersion and velocity wave in S-FG plates.

• Coupled systems mechanics
• /
• 제10권2호
• /
• pp.185-198
• /
• 2021

An analytical model is consider to scrutinize axisymmetric wave propagation in multiferroic hollow cylinder with rotating and initial stressed forces, where a piezomagnetic (PM) material layer is bonded to a piezoelectric (PE) cylinder together by Linear elastic materials with voids. Both distinct material combos are taken into account. Three displacement potential functions are introduced to uncouple the equations of motion, electric and magnetic induction. The numerical calculations are carried out for the non-dimensional frequency by fixing wave number and thickness. The arrived outputs are plotted as the dispersion curves for different layers. The results obtained in this paper can offer significance to the application of PE/PM composite hollow cylinder via LEMV and CFRP layers for the acoustic wave and microwave technologies.

• 폴리머
• /
• 제36권4호
• /
• pp.513-518
• /
• 2012

열적으로 안정한 탄화수소계 액상 파라핀인 YK-D130을 분산매로 사용하여 ${\omega}$-amino carboxylic acid와 adipic aicd로부터 폴리아미드 12(PA12) 올리고머(oPA1)를 제조하였으며 이들을 통상의 벌크중합으로 제조되는 비슷한 분자량의 폴리아미드 올리고머(oPA2)로 합성하여 분자량과 기타 특성을 비교하였다. 색도 분석 결과 oPA1이 더 밝은 백색을 나타냈고, GPC 결과로부터 oPA1가 더 좁은 분자량 분포를 보였다. 나아가 oPA1과 oPA2를 hard segment로 하고 poly(tetramethylene glycol)(PTMG)을 soft segment로 하는 탄성의 poly(ether-block-amide)(PEBA)를 합성하였다. 합성된 PEBA의 분자량과 기계적 성질 등을 비교 분석하였다.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.631-640
• /
• 2023

This study selected Eco-AZ91 MgH₂, which shows high enthalpy as a material for this purpose, as the basic material, and analyzed the change in characteristics by synthesizing TiNi as a catalyst to control the thermodynamic behavior of MgH₂. In addition, the catalyst dispersion technology using graphene oxide (GO) was studied to improve the high-temperature aggregation phenomenon of Ni catalyst and to secure a source technology that can properly disperse the catalyst. XRD, SEM, and BET analysis were conducted to analyze the metallurgical properties of the material, and TGA and DSC analysis were conducted to analyze the dehydrogenation temperature and calorific value, and the correlation between MgH₂, TiNi catalyst, and GO reforming catalyst was analyzed. As a result, the MgH₂-5 wt% TiNi at GO composite could lower the dehydrogenation temperature to 478-492 K due to the reduction of the catalyst aggregation phenomenon and the increase in the reaction specific surface area, and an experimental result for the catalyst dispersion technology by GO could be ensured.

• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.548-557
• /
• 2010

An ultrasonic resonance scattering spectroscopy technique is developed and applied for reconstructing elastic constants of a transversely isotropic cylindrical component. Immersion ultrasonic measurements are performed on tube samples made from a boron/aluminum composite material to obtain resonance frequencies and dispersion curves of different guided wave modes propagating in the tube. Theoretical analysis on the acoustic resonance scattering from a transversely isotropic cylindrical tube is also performed, from which complete backscattering and resonance scattering spectra and theoretical dispersion curves are calculated. A sensitive change of the dispersion curves to the elastic properties of the composite tube is observed for both normal and oblique incidences; this is exploited for a systematic evaluation of damage and elastic constants of the composite tube samples. The elastic constants of two boron/aluminum composite tube samples manufactured under different conditions are reconstructed through an optimization procedure in which the residual between the experimental and theoretical phase velocities (dispersion curves) is minimized.

• 비파괴검사학회지
• /
• 제21권4호
• /
• pp.391-397
• /
• 2001

비균질 적층 구조물에서의 유도초음파 전파는 이론적 분산성에 기초하여 실험적으로 규명된다. 이는 입사각도와 주파수의 적절한 선택은 적층 구조물에서의 유도초음파 발생에 중요하나는 깃을 드러낸다. 이론적 분산성은 접착층 두께와 층 두께, 물성치에 크게 의존한다. 실험적으로 분산성의 변화를 관찰하므로 비균질 적층 구조물의 접착층 두께를 측정하는 것이 가능하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.725-726
• /
• 2006

Ultra-fine grained and dispersion-strengthened titanium materials (Ti-Si, Ti-C, Ti-Si-C) have been produced by high energy ball milling and spark plasma sintering (SPS). Silicon or/and carbon were milled together with the titanium powder to form nanometer-sized and homogeneously distributed titanium silicides or/and carbides as dispersoids, that should prevent grain coarsening during the SPS compaction and contribute to strengthening of the material. The microstructures and the mechanical properties showed that strength, hardness and wear resistance of the sintered materials have been significantly improved by the mechanisms of grain refinement and dispersion strengthening. The use of an organic fluid as carrier of the dispersoid forming elements caused a significant increase in ductility.

• Macromolecular Research
• /
• 제8권4호
• /
• pp.186-191
• /
• 2000

Clay-dispersed nanocomposites have been prepared by simple melt-mixing of three components, i.e. poly (styrene co-acrylonitrile) copolymer (SAN), poly ($\xi$-caprolactone ) (PCL), and an organophilic clay(Cloisite(R) 30A). In the present study, poly($\xi$-caprolactone) was added in the mixtures in order to facilitate the intercalation of SAN into the gallery of silicate layers, and the molecular weight effects of PCL on the dispersion of silicate layers were compared by changing the amount of added PCL. The degree of dispersion of 10-$\AA$-thick silicate layers of clay in the nanocomposites was investigated by using an X-ray diffractometer and a transmission electron microscope. It was found that PCL added in the mixture facilitate the intercalation of SAN copolymers into the galleries of silicate layers modified with an organic intercalant, resulting in the better dispersion of clay. It was, also, observed that the processing temperature influences the degree of clay dispersion.