• Journal of Korea Water Resources Association
• /
• v.56 no.1
• /
• pp.53-62
• /
• 2023

Recently, due to the influence of climate change, the occurrence of damage to heavy rain is increasing around the world, and the frequency of heavy rain with a large amount of rain in a short period of time is also increasing. Heavy rains generate a large amount of outflow in a short time, causing flooding in the downstream part of the mountainous area before joining the small and medium-sized rivers. In order to reduce damage to downstream areas caused by flooding, it is very important to calculate the outflow of mountainous areas due to torrential rains. However, the sewage network flooding analysis, which is currently conducting the most analysis in Korea, uses the time and area method using the existing data rather than calculating the rainfall outflow in the mountainous area, which is difficult to determine that the soil characteristics of the region are accurately applied. Therefore, if the rainfall is analyzed for mountainous areas that can cause flooding in the downstream area in a short period of time due to large outflows, the accuracy of the analysis of flooding characteristics that can occur in the downstream area can be improved and used as data for evacuating residents and calculating the extent of damage. In order to calculate the rainfall outflow in the mountainous area, the rainfall outflow in the mountainous area was calculated using MIKE SHE among the MIKE series, and the flooding analysis in the downstream area was conducted through MIKE 21 FM (Flood model). Through this study, it was possible to confirm the amount of outflow and the time to reach downstream in the event of rainfall in the mountainous area, and the results of this analysis can be used to protect human and material resources through pre-evacuation in the downstream area in the future.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.261-267
• /
• 2007

The 20 L small chamber test method is to evaluate pollutants such as TVOC, formaldehyde emitted from building materials. This method was only designed to evaluate the surface emission of sample exposed in the chamber. In this method, building materials cut with a fixed standard size are fixed in a sample sealing box. The sample sealing box is put into the 20 L test chamber. This chamber is ventilated at a standard air change rate with purified air for 7 days then the sample from the chamber is collected and analyzed to measure the emission rate of TVOC and formaldehyde. In this method, however, if the sealing box does not guarantee airtightness, accurate evaluation for the building materials can not be achieved due to the pollutants emitted from edge of the sample so called, edge effect. This edge effect can be much greater when evaluating panels such as plywood, flooring due to their surface treatment. In this study, flooring was tested to check airtightness of the sample sealing box with analytic results between 1L and 20 L test chamber. Furniture materials like LPM coated one side surface treatment and MDF coated both sides surface treatment with LPM were tested to identify whether the improvement of the sample sealing box airtightness is possible with the comparison between existing and improved test method that low VOC emission tape was used to seal the sample edge. After 7 days, MDF TVOC emission rate was different according to the existence and nonexistence of tape. The emission rate of the existing test method was $0.009mg/m^2h$ and that of improved test method was $0.003mg/m^2h$. Relative standard deviation for the existing test method was $0.004mg/m^2h$ and relative standard deviation for the improved test method was $0.002mg/m^2h$ when the same sample was analyzed three times. The improved test method in this study using low VOC emission tape was effective and able to reduce the heterogeneous effect of the edge from the sample sealing box.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.5
• /
• pp.263-271
• /
• 2019

The recent phenomenon of job "Miss Match", which is inconsistent with knowledge in the demand of educational training institutes and industries, has spread to an increase in private education costs for reeducation and employment of new hires, resulting in weak individual job competency and poor employment capability, as well as economic and material waste at the national level. To compensate for these problems, the National Competency Standards(NCS), which are available immediately in practice and look for a standard point of national job competency with the aim of fostering human resources sought by industries, were developed, and even the NCS-based qualification system was launched in line with the stream of times. This study is intended to look into the importance and priority of competency units and competency unit elements at the NCS-based qualification L3 level in the skin care field for an overall check of the NCS-based qualification level at a time when educational institutes are organizing and operating the school curriculums according to the NCS and NCS-based qualification level. And it is attempted to provide basic data for the development of curriculum in fostering professional human resources required by industries. To analyze the needs for competency units and competency unit elements at the L3 level, a survey using AHP method was carried out to a group of field experts and a group of education experts. In addition, the SPSS(Statistical Package for Social Science) ver. 21.0 and Expert Choice 2000, an AHP-only solution was used to do statistical processing through the processes of data coding and data cleaning. The findings showed that there was a partial difference of opinion between a group of field experts and a group of education experts. This indicates that the inconsistencies between educational training institutes and industrial sites should be resolved at this time of change with the aim of fostering field customized human resources with professional skills. Consequently, the solution is to combine jobs at industrial sites and standardized educations of educational institutes with human resources required at industrial sites.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.27 no.2
• /
• pp.78-95
• /
• 2024

For the establishment and comparison of environmental plans across various domains, considering climate change and urban issues, it is crucial to build spatial data at the regional scale classified with consistent criteria. This study mapping the Local Climate Zone (LCZ) of Changwon City, where active climate and environmental research is being conducted, using the protocol suggested by the World Urban Database and Access Portal Tools (WUDAPT). Additionally, to address the fragmentation issue where some grids are classified with different climate characteristics despite being in regions with homogeneous climate traits, a filtering technique was applied, and the LCZ classification characteristics were compared according to the filtering radius. Using satellite images, ground reference data, and the supervised classification machine learning technique Random Forest, classification maps without filtering and with filtering radii of 1, 2, and 3 were produced, and their accuracies were compared. Furthermore, to compare the LCZ classification characteristics according to building types in urban areas, an urban form index used in GIS-based classification methodology was created and compared with the ranges suggested in previous studies. As a result, the overall accuracy was highest when the filtering radius was 1. When comparing the urban form index, the differences between LCZ types were minimal, and most satisfied the ranges of previous studies. However, the study identified a limitation in reflecting the height information of buildings, and it is believed that adding data to complement this would yield results with higher accuracy. The findings of this study can be used as reference material for creating fundamental spatial data for environmental research related to urban climates in South Korea.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.3
• /
• pp.196-205
• /
• 2004

As far as an opening device of fishing gears is concerned, applications of a kite are under development around the world. The typical examples are found in the opening device of the stow net on anchor and the buoyancy material of the trawl. While the stow net on anchor has proved its capability for the past 20 years, the trawl has not been wildly used since it has been first introduced for the commercial use only without sufficient studies and thus has revealed many drawbacks. Therefore, the fundamental hydrodynamics of the kite itself need to ne studied further. Models of plate and canvas kite were deployed in the circulating water tank for the mechanical test. For this situation lift and drag tests were performed considering a change in the shape of objects, which resulted in a different aspect ratio of rectangle and trapezoid. The results obtained from the above approaches are summarized as follows, where aspect ratio, attack angle, lift coefficient and maximum lift coefficient are denoted as A, B, $C_L$ and $C_{Lmax}$ respectively : 1. Given the rectangular plate, $C_{Lmax}$ was produced as 1.46${\sim}$1.54 with A${\leq}$1 and 40$^{\circ}$${\leq}$B${\leq}$42$^{\circ}$. And when A${\geq}$1.5 and 20$^{\circ}$${\leq}$B${\leq}$22$^{\circ}$, $C_{Lmax}$ was 10.7${\sim}$1.11. Given the rectangular canvas, $C_{Lmax}$ was 1.75${\sim}$1.91 with A${\leq}$1 and 32$^{\circ}$${\leq}$B${\leq}$40$^{\circ}$. And when A${\geq}$1.5 and 18$^{\circ}$${\leq}$B${\leq}$22$^{\circ}$, $C_{Lmax}$ was 1.24${\sim}$1.40. Given the trapezoid kite, $C_{Lmax}$ was produced as 1.65${\sim}$1.89 with A${\leq}$1.5 and 34$^{\circ}$${\leq}$B${\leq}$44$^{\circ}$. And when A=2 and B=14${\sim}$48, $C_L$ was around 1. Given the inverted trapezoid kite, $C_{Lmax}$ was 1.57${\sim}$1.74 with A${\leq}$1.5 and 24$^{\circ}$${\leq}$B${\leq}$36$^{\circ}$. And when A=2, $C_{Lmax}$ was 1.21 with B=18$^{\circ}$. 2. For a model with A=1/2, an increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. Then there was a tendency of a gradual decrease in the value of $C_L$ and in particular, the rectangular kite showed a more rapid decrease. For a model with A=2/3, the tendency of $C_L$ was similar to the case of a model with A=1/2 but the tendency was a more rapid decrease than those of the previous models. For a model with A=1, and increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. Soon after the tendency of $C_L$ decreased dramatically. For a model with A=1.5, the tendency of $C_L$ as a function of B was various. For a model with A=2, the tendency of $C_L$ as a function of B was almost the same in the rectangular and trapezoid model. There was no considerable change in the models with 20$^{\circ}$${\leq}$B${\leq}$50$^{\circ}$. 3. The tendency of kite model's $C_L$ in accordance with increase of B was increased rapidly than plate models until $C_L$ has reached the maximum. Then $C_L$ in the kite model was decreased dramatically but in the plate model was decreased gradually. The value of $C_{Lmax}$ in the kite model was higher than that of the plate model, and the kite model's attack angel at $C_{Lmax}$ was smaller than the plate model's. 4. In the relationship between aspect ratio and lift force, the attack angle which had the maximum lift coefficient was large at the small aspect ratio models, At the large aspect ratio models, the attack angle was small. 5. There was camber vertex in the position in which the fluid pressure was generated, and the rectangular & trapezoid canvas had larger value of camber vertex when the aspect ratio was high, while the inverted trapezoid canvas was versa. 6. All canvas kite had larger camber ratio when the aspect ratio was high, and the rectangular & trapezoid canvas had larger one when the attack angle was high.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.2
• /
• pp.51-58
• /
• 2019

Purpose In in-vitro laboratories of nuclear medicine department, when the reagent lot or reagent lot changes Comparability test or parallel test is performed to determine whether the results between lots are reliable. The most commonly used standard domestic laboratories is to obtain %difference from the difference in results between two lots of reagents, and then many laboratories are set the standard to less than 20% at low concentrations and less than 10% at medium and high concentrations. If the range is deviated from the standard, the test is considered failed and it is repeated until the result falls within the standard range. In this study, several tests are selected that are performed in nuclear medicine in-vitro laboratories to analyze parallel test results and to establish criteria for customized percent difference for each test. Materials and Methods From January to November 2018, the result of parallel test for reagent lot change is analyzed for 7 items including thyroid-stimulating hormone (TSH), free thyroxine (FT4), carcinoembryonic antigen (CEA), CA-125, prostate-specific antigen (PSA), HBs-Ab and Insulin. The RIA-MAT 280 system which adopted the principle of IRMA is used for TSH, FT4, CEA, CA-125 and PSA. TECAN automated dispensing equipment and GAMMA-10 is used to measure insulin test. For the test of HBs-Ab, HAMILTON automated dispensing equipment and Cobra Gamma ray measuring instrument are used. Separate reagent, customized calibrator and quality control materials are used in this experiment. Results 1. TSH [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(low concentration) [14.8 / 4.4 / 3.7 / 0.0 ] C-2(middle concentration) [10.1 / 4.2 / 3.7 / 0.0] 2. FT4 [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(low concentration) [10.0 / 4.2 / 3.9 / 0.0] C-2(high concentration) [9.6 / 3.3 / 3.1 / 0.0 ] 3. CA-125 [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(middle concentration) [9.6 / 4.3 / 4.3 / 0.3] C-2(high concentration) [6.5 / 3.5 / 4.3 / 0.4] 4. CEA [%diffrence Max / Mean / median] (P-value by t-test > 0.05) C-1(low concentration) [9.8 / 4.2 / 3.0 / 0.0] C-2(middle concentration) [8.7 / 3.7 / 2.3 / 0.3] 5. PSA [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(low concentration) [15.4 / 7.6 / 8.2 / 0.0] C-2(middle concentration) [8.8 / 4.5 / 4.8 / 0.9] 6. HBs-Ab [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(middle concentration) [9.6 / 3.7 / 2.7 / 0.2] C-2(high concentration) [8.9 / 4.1 / 3.6 / 0.3] 7. Insulin [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(middle concentration) [8.7 / 3.1 / 2.4 / 0.9] C-2(high concentration) [8.3 / 3.2 / 1.5 / 0.1] In some low concentration measurements, the percent difference is found above 10 to nearly 15 percent in result of target value calculated at a lower concentration. In addition, when the value is measured after Standard level 6, which is the highest value of reagents in the dispensing sequence, the result would have been affected by a hook effect. Overall, there was no significant difference in lot change of quality control material (p-value>0.05). Conclusion Variations between reagent lots are not large in immunoradiometric assays. It is likely that this is due to the selection of items that have relatively high detection rate in the immunoradiometric method and several remeasurements. In most test results, the difference was less than 10 percent, which was within the standard range. TSH control level 1 and PSA control level 1, which have low concentration target value, exceeded 10 percent more than twice, but it did not result in a value that was near 20 percent. As a result, it is required to perform a longer period of observation for more homogenized average results and to obtain laboratory-specific acceptance criteria for each item. Also, it is advised to study observations considering various variables.

• Journal of Chest Surgery
• /
• v.37 no.12
• /
• pp.967-977
• /
• 2004

Background: DNA methylation is one of the important gene expression mechanisms of the cell. When cytosine of CpG dinucleotide in promotor is hypomethylated, expression of some genes that is controlled by this promoter is altered. In this study, the author investigated the effect of DNA demethylating agent, 5-aza-2'-deoxycytidine (ADC), on the expressions of cancer antigen genes, MHC and B7 in 4 lung cancer cell lines, NCIH1703, NCIH522, MRC-5, and A549. Material and Method: After treatment of cell lines, NCIH1703, NCIH522, MRC-5 and A549 with ADC (1 uM) for 48 hours, RT-PCR was performed by using the primers of MAGE, GAGE, NY-ESO-1, PSMA, CEA, and SCC antigen gene. In order to find the optimal ADC treatment condition for induction of cancer antigen, we studied the effect of ADC treatment time and dose on the cancer antigen gene expression. To know the effect of ADC on the expression of MHC or B7 and cell growth, cells were treated with 1 uM of ADC for 72 hours for FACS analysis or cells were treated with 0.2, 1 or 5 uM of ADC for 96 hours for cell counting. Result: After treatment of ADC (1 uM) for 48 hours, the expressions of MAGE, GAGE, NY-ESO-1, and PSMA genes increased in some cell lines. Among 6 MAGE isotypes tested, and gene expression of MAGE-1, -2, -3, -4 and -6 could be induced by ADC treatment. However, CEA gene expression did not change and SCC gene expression was decreased by ADC treatment. Gene expression was generally induced 24 - 28 hours after ADC treatment and expression of MAGE, GAGE, and NY-ESO-1 was maintained at least 14 days after ADC ADC teatment, and expression of MAGE, GAGE, and NY-ESO-1 was maintained at least 14 days after ADC teatment in ADC-Free medium. Most gene expression could be induced at 0.2 uM of ADC, but gene expression increased dependently on ADC treatment dose. The expression of MHC and B7 was not increased by ADC treatment in all four cell lines, and the growth rate of 4 cell lines decreased significantly with the increase of ADC concentrations. Conclusion: Treatment of lung cancer cell lines with ADC increases the gene expression MAGE, GAGE and NY-ESO-1 that are capable of induction of cytotoxic T lymphocyte response. We suggest that treatment with 1 uM of ADC for 48 hours and then culturing in ADC-free medium is optimal condition for induction of cancer antigen. However, ADC has no effect on MHC and B7 induction, additional modification for increase of expression of MHC, B7 and cytokine will be needed for production of efficient cancer cell vaccine.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1837-1847
• /
• 2008

The goal of this study is to express the image of chameleons-that change their colors by light, temperature and its mood-into the sexy styles of corresponding coquettish temperamental people in Wearable Art. The method used in this study was experimenting various production mediums, including creating the textured stretch fabric, in the process of expressing the conceptual characteristics of the chameleon in Wearable Art. The concept of the work was a concoction of 'tempting', 'splendid', 'brilliant', 'fascinating', etc. that highlighted the real disposition of the chameleon. The futuristic preference of the researcher was also implicated. "Comfortable" and "enjoyable" concepts via motions were improved with the its completeness. The point of the design and production is to express symbolically the chameleon in real life, analyzing its sleek body lines, conditional colors changing, outer skins and the cubic textures. The coquettish temperamental image, the conceptual image of the chameleon, was also expressed by implication into the whole work. The entire line of this work is body-conscious silhouette. It was symbolically selected to image the outline of the chameleon that has the slim and sleek body. The exposed back is intended to express symbolically the projected back bones of the chameleon. The hood of gentle triangle line expresses the smooth-lined head part. The irregular hemlines represent the elongated chameleon's tale. The chameleon with its colors of vivid tones is characterized the colors changing by its conditions. This point was importantly treated in the working process by trying the effects that the colors are seen slightly different according to the light and angles. The material was given the effect that its surface colors are seen different in lights and angles because of the wrinkles protruded lumpy-bumpy. The various stones of red and blue tones are very similar to the skin tones of the real chameleon, and their gradation makes the effect that the colors are visibly changed with each move. The textures of the chameleon were produced via the wrinkle effect of smoke-shape, which is the result of using the elastic threads on the basic mediums stitched with 50/50 chiffon and polyester along with velvet dot patterns. The stretching fabric by the impact of the elastic threads is as much suitable for making the body-conscious line. The stones are composed of acrylic cabochon and gemstone. They are symbolically expressed the lumpy and bumpy back skin of the chameleon and produced the effect of the colors visibly different. The primary technique used in this dress is the draping utilizing the biased grains. The front body piece is connected to the hood and joined to the back piece without any seam. For the irregular hemline flares, leaving the several rectangular pieces with bias grains, they were connected by interlocking. What defines the clothes is the person in action. Therefore, what decides the completeness of clothes might be its comfortable and enjoyable feeling by living and acting people. The chameleon dress could also reach its goal of comforting and pleasing Wearable Art in the process of studying the techniques and effects that visibly differentiate the colors. It is considered as a main point of the Wearable Art, which is a comfortable enjoyable clothing tempered with the artistic beauty.

• Journal of Chest Surgery
• /
• v.36 no.3
• /
• pp.150-156
• /
• 2003

Tricuspid regurgitation has been considered as a secondary lesion when it is combined with left valvular heart diseases. However, there have been some reports which show that tricuspid regurgitation keeps going and results in congestive heart failure even after a successful operation for left valvular heart disease. So far, there are no definite operation indications and predictive factors for the tricuspid re-gurgitation which is resulted from the left sided valvular heart disease. We designed this study to evaluate the effects of pulmonary artery pressure and left ventricular ejection fraction on the prognosis of tricuspid regurgitation, and to make an operation indication for the patients with secondary tricuspid regurgitation. Material and Method: We reviewed the medical records of patients who underwent surgery for the left sided valvular heart disease with tricuspid regurgitation and were followed for more than 1 year with echocardiograms. There was a total of 114 cases. We compared the grades of tricuspid regurgitations and pulmonary artery pressures and left ventricular ejection fractions on the basis of echocardiograms which were checked preoperatively and on the last follow up. Result: There were 43 cases of tricuspid an-nuloplasty. In these patients, the grades of tricuspid regurgitations were improved in 42 cases (97.7%). But in 71 cases without annuloplasty, 29 cases (41%) were improved, 32 cases (45%) had no change, and 29 cases (14%) were aggravated. This finding shows significant differences in the prognoses of tricuspid regur-gitations between the two groups (p<0.05). There was no difference in pulmonary artery pressures and ejection fractions between the patients who showed progression of tricuspid regurgitations and those who didn't (p > 0.05). The improvements of tricuspid regurgitations are not statistically related to the changes of pulmonary artery pressures or left ventricular ejection fractions. Conclusion: This study shows that it is impossible to predict the prognoses of tricuspid regurgitations with preoperative pulmonary artery pressures or left ventricular ejection fractions. Also, the excellent results of tricuspid annuloplasty is proven in controlling the secondary tricuspid regurgitations. Therefore, when tricuspid regurgitation is detected preoperatively, the procedures to correct the tricuspid regurgitation at the time of the operation for the left-sided valvular heart disease must be considered positively, regardless of the grades of tricuspid regurgitations, to prevent sig-nificant tricuspid regurgitation that may develop later.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.21-28
• /
• 1973

This report is prepared to promote cocoon natures for the use of silk reeling material. It is easily understandable that there must be disuniformity composed with superior group and inferior group in commercial silkworms. If such different groups be seperated by some method, it would be a great contribution for the cocoon production. For a comparative purpose, silkworm sex seperation carried out because male silkworms produce more silk than female worms. The author has developed a new chemical reagent available for the seperation of superior group and inferior group from commercial silkworms, which he has named it as Better Hybrid Controller (BHC). The obtained comparative results are summarized as followings. 1. Basic investigation of BHC application a) In case BHC applied with hybrid worms and pure line, the former one starts to adapt mulberry leaves earlyer than pure line variety. b) The mulberry adapting interval distribution of pure line worms after BHC application showed U type distribution, but hybrid worms showed L type or Poisson's distribution. c) In case of BHC application with silkworms, the longer period application is, the duller distribution was formed. d) When silkworms are seperated in two groups by use of BHC application, the earlyer mulberry adapted group is seemed as stronger than the other part and the group ratio is 2 : 1. 2. Comparation between sex seperation result and better hydrid control (BHC) seperation result. a) The cocoon shell per cent of male worm group showed betweer result than the female group but only 0.4% difference between sexes. b) The cocoon shell per cent of superior group, seperated by BHC, showed 0.7% more than the inferior group. c) The average cocoon shell per cent of BHC treated cocoons showed much more than the Control group as 1.6∼2.4% increase. Enven the inferior group showed better result than the Control. d) Such unexpected result is considered to be the result that BHC application is activating some thing with silkworm physiology. e) On the ether hand, the result of sexes seperated groups or male worm group did not show desirable conclusion as far as cocoon shell per cent is concerned. f) However, when the male group was reeled as silk, it showed much better silk yield or silk per cent of cocoon than the female group as much as one per cent difference between by sexes. Such result was brought by superior silk yield from cocoon shell as much as 87.4%. g) On the other hand, the male group showed lowest non breaking reelable ratio (63%) among all group comparation. h) When we compare cocoon qualities by sex seperation and BHC seperation against the Control, there is no qualitative change, but BHC group showed quantitative promotion with cocoon bave length as much as about hundred meters. i) In case of calculation for productive income of cocoon production, BHC applied group showed about ten per cent income promotion more than the Control. The sexes seperated group, however, showed rather negative result because the male cocoon produced poor weight per box eggs which could not cover it by the inclose of silk yield of it. j) So, the BHC application with the fetched worm stage brought about big promotion for cocoon production. k) BHC method may be used either for seperation purpose or quantitative promotion with whole silk-worms. 3. Only male silkworms rearing did not show desirable productivity, so there is no reason to work out it in the fetching stage of worm.