• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.428-436
• /
• 2012

This study aimed to develop the multi-span plastic greenhouse which is suitable for tomato cultivation and is safe against climatic disasters such as typhoon or heavy snow. The width and heights of eaves and ridge of newly developed tomato greenhouse are 7, 4.5 and 6.5 m, respectively. The width is the same but the eaves and ridge heights are 1.8 and 2 m higher than conventional 1-2 W greenhouses, respectively. Cross beam has been designed as a truss structure so it can sustain loads of tomato and equipment. Tomato greenhouse has been designed according to climatic disaster preventing design standard maintaining the high height. In other words, the material dimensions and interval of materials including column and rafter have been set to stand against $40m{\cdot}s^{-1}$ of wind and 40 cm of snow. Tomato greenhouse has been equipped with rack-pinion type roof vents which have been used in glass greenhouse in order to prevent excessive rise in air temperature. This vent type is different from that of 1-2 W type greenhouse which is made by rolling up and down the vinyl at upper part of column. Roof vents are installed at ridge, and thus external air inflow and natural ventilation are maximized. As the height increases, heating cost increase as well and, therefore, tomato greenhouse has been equipped with multi-layered thermal curtain, of which thermo-keeping is excellent, to prevent heat from escaping.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.69-77
• /
• 2024

Due to the miniaturization and multifunctionality of electronic devices, a surface mount technology in the form of molded interconnect devices (MID), which directly forms electrodes and circuits on the plastic injection parts and mounts components and parts on them, is being introduced to overcome the limitations in the mounting area of electronic components. However, when using plastic injection parts with low thermal stability, there are difficulties in mounting components through the conventional reflow process. In this study, we developed a process that utilizes induction heating, which can selectively heat specific areas or materials, to melt solder and mount components without causing any thermal damage to the plastic. We designed the shape of an induction heating Cu coil that can concentrate the magnetic flux on the area to be heated, and verified the concentration of the magnetic flux and the degree of heating on the pad part through finite element method (FEM). LEDs, capacitors, resistors, and connectors were mounted on a polycarbonate substrate using induction heating to verify the mounting process, and their functionality was confirmed. We presented the applicability of a selective heating process through magnetic induction that can overcome the limitations of the reflow method.

• Journal of Korean Academy of Nursing
• /
• v.26 no.4
• /
• pp.963-975
• /
• 1996

The purpose of this study was to call attention to the mental, physical and occupational hazards of the anticancer-drug-handling nurses by examining the possible urinary mutagenicity and measuring physical symptoms and stress level of the nurses exposed to anticancer drugs. The experimental group of the urinary mutagenicity assay was 14 nurses handling anticancer drugs at the medical wards of a hospital located in J city ; the control group was 12 psychiatric nurses of the same hospital. The test material was the nurses' 24hrs urine, which was concentrated by XAD-2 column chromatography. Tester strains were TA98(±S9 mix), TA100(±S9 mix), TA1535(±S9 mix) and TA1537(±S9 mix) ; Salmonella mammalian-microsomal test(Ames test) was employed for the urinary mutagenicity assay. The physical symptoms of which the nurses experienced were investigated through self-reports on open-questionnaires. The stress levels of the experimental group were measured by a stress measuring instrument developed by this author. Reliability of this instrument was found to be adequate (Cronbach's Alpha=0.9079). To ascertain the urinary mutagenicity of the experimental group, the mean and the standard deviation of the colonies of Tester strains appearing on the minimal plates were taken and compared differences between two groups. T-test was employed for the significance test of two groups. The physical symptoms were compared between the two groups through the analysis of the nurse' self-reports. The mean and standard deviation of the stress levels of the experimental group were also calculated and were examined through t-test. The results were summarized as follows : 1. The experimental group revealed significantly higher urinary mutagenicity both in the activation method test and the non-activation method test of the tester strains TA98, TA100 and TA1535. In the case of TA1537, two groups showed no difference in the non-activation method test, but the activation method revealed difference. 2. The physical symptoms were also much more frequently reported in the experimental group. 79.3% of the experimental group reported more than 1 kind of physical symptoms. On the other hand, 33.2% of the control group complained of 1 kind of physical symptom. The items with high symptom frequency were 'headache', 'itching sensation', 'corneal congestion', 'skin allergy' 3. The mean score of stress in the experimental group was 2.41(range 1-4). The experimental group showed the stress level above 2.0 in the 14 of 15 items in all. The highest stress level were recorded in the following items in the order quoted, 'I fear that anticancer drug may touch any part of body while handling it.', 'I feel concerned there is no protective countermeasure against anticancer drug handling.', 'I am afraid the anticancer drug handling may produce a fetal loss in the future'.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.20-26
• /
• 2019

Where hydraulic structures are to be installed over the entire width of a river or stream, usually a bed protection structure is to be installed. However, a local scour occurs in which the river bed downstream of the river protection system is eroded due to the influence of the upstream flow characteristics. This local scour is dominant in the flow and turbulence characteristics at the boundary of the flow direction and in the material of the bed materials, and may gradually become dangerous over time. Therefore, in this study, we compared the turbulence patterns in the local scour hole at the downstream of the river bed protection with the results of the analysis of the mobile bed experiment, and compared with the application of OpenFoam, a three dimensional numerical analysis model. The distribution of depth-averaged relative turbulence intensities along the flow direction was analyzed. In addition to this result, the stabilization of scour hole was compared with the bed shear stress and Shields parameter, and the results were compared by changing the initial turbulent flow conditions. From the results, it was confirmed that the maximum depth of generation of the three-stage was dominantly developed by the magnitude of depth-averaged relative turbulence intensity rather than the mean flow velocity. This result also suggests that design, construction or gate control are needed to control the depth-averaged relative turbulence intensities in order to reduce or prevent the local scour faults that may occur in the downstream part of the bed protection.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.2
• /
• pp.47-53
• /
• 2014

Three kinds of crystalline silicon have been used for the solar cell grade. First of all, single crystalline silicon is the main subject to enhance the production yield. Most of the efforts are focused on the control of the melt-crystal interface shape affected by the crystal-crucible rotation rate. The main subject in the multi-crystalline silicon ingot is the contamination control. Faster Ar gas flow above the melt surface will lower the carbon contamination in the crystal. And also, twin boundary electrically inactive is found to be more effective than grain boundary for the improvement of the MCLT. In the case of mono-like silicon material, propagation of the multi-crystalline silicon growing from the inner side crucible is the problem lowering the portion of the single crystalline part at the center of the ingot. Crystal growing apparatus giving higher cooling rate at the bottom and lower cooling rate at the side crucible was suggested as the optimum solution obtaining higher quality of the mono-like silicon ingot. Proper application of the seeds at the bottom of the crucible would be one of the solutions.

• Journal of Radiation Protection and Research
• /
• v.39 no.3
• /
• pp.127-133
• /
• 2014

North Korea's uranium enrichment facility is a matter of international concern. It is of particular alarming to South Korea with regard to the security and safety of the country. This situation requires continuous monitoring of the DPRK and emergency preparedness on the part of the ROK. To assess the detectability of an undeclared uranium enrichment plant in North Korea, uranium concentrations in the air at both a short and a long distance from the enrichment facility were estimated. $UF_6$ source terms were determined by using existing information on North Korean facility and data from the operation experience of enrichment plants from other countries. Using the calculated source terms, two atmospheric dispersion models (Gaussian Plume Model and HYSPLIT models) and meteorological data were used to estimate the uranium particle concentrations from the Yongbyon enrichment facility. A maximum uranium concentration and its location are dependent upon the meteorological conditions and the height of the UF6 release point. This study showed that the maximum uranium concentration around the enrichment facility was about $1.0{\times}10^{-7}g{\cdot}m^{-3}$. The location of the maximum concentration was within about 0.4 km of the facility. It has been assumed that the uranium sample of about a few micrograms (${\mu}g$) could be obtained; and that few micrograms of uranium can be easily measured with current measurement instruments. On the contrary, a uranium concentration at a distance of more than 100 kilometers from the enrichment facility was estimated to be about $1.0{\times}10^{-13}{\sim}1.0{\times}10^{-15}g{\cdot}m^{-3}$, which is less than back-ground level. Therefore, based on the results of our paper, an air sample taken within the vicinity of the Yongbyon enrichment facility could be used to determine as to whether or not North Korea is carrying out an undeclared nuclear program. However, the air samples taken at a longer distance of a few hundred kilometers would prove difficult in detecting a clandestine nuclear activities.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.352-352
• /
• 2017

Recently, the South Korean government encourages the cultivation of upland crops in the paddy field to maintain an adequate level of rice production and then to balance the demand and supply of rice. This is mainly because the rice consumption per capita per year has continued to decline from 135 kg in 1979 to 61.9 kg in 2016, although the rice production was relatively stable. As a result, the rice overproduction became a big social problem. As a part of that, various upland crops such as soybean, maize, minor cereals and forage crops are planted in the paddy field 10 years ago. The cultivation of these crops may settle the problem of short supply and mass import of the crops to some extent. However, a systematic remote observation of upland crops in the paddy field is very scarce. This study investigated the cultivation status of upland crops and any changes of crop harvesting in the paddy field by using an unmanned aerial vehicle (UAV). Also, we analyzed the kind of upland crops and cultivation area in the paddy field by utilizing time series observation images. A fixed wing UAV is used for the investigation. This is because it is easy to use the flight operation and to control flight management software, and it can automatically cope with various emergency states such as a strong wind and battery discharge. The material of UAV is expanded polypropylene, which has an advantage of less equipment damage and risk during takeoff and landing. We acquired observed images in Buljeong-myeon, Goesan-gun, Chungcheongbuk-do, South Korea by using fixed wing UAV in 2015 and 2016. The total investigated area reaches 6,045 ha, and among them the agricultural area was 1,377 ha. For the next step, we created an orthoimage from all images taken using Pix 4D mapper program. According to the results of image analyses in 2015, the paddy field covered total 577 ha (75.9%) with crop plant. The cultivation area of beans, ginseng, maize, tobacco and peach was 256 ha (36.6%), 63 ha (9.2%), 37 ha (5.4%), 31 ha (4.5%) and 27 ha (3.8), respectively. And in 2016, the total covered area was 586 ha (77.1%), and it was comprised of 253 ha (35.5%), 88 ha (12.3%), 29 ha (4.1%), 22 ha (3.1%) and 32 ha (4.5%) in the same order. In this study, we focused on identifying the paddy field which was converted to the cultivation of upland crops by using UAV. And, it has been indicated that the cultivation area of rice decreased from 141 ha in 2015 to 127 ha in 2016, although that of ginseng increased by 25 ha. As a result, it is expected that a lot of paddy field could be replaced by high-income crops such as ginseng and fruit tree (peach) instead of relative low-income rice. More specific and widespread research on the remote sensing in the paddy field needs to be done.

• Korean Journal of Human Ecology
• /
• v.6 no.2
• /
• pp.121-131
• /
• 1997

This study was to design the clean room garment which fits for a body and adjusts well to the action. We examined the body's changes in action through a body measurment and made a sample of the clean room garment to which had adapted the body's changes in action and evaluated the function and the appearance compared with the existing the clean room garment. The followings were summery of the results : 1. Back intersyce breadth decreased, trunk length increased and the other parts were not change. At a posture of raising hands($M_3$) in comparison with an upright posture($M_0$). Back intersyce breadth, hip length and knee length increased and the other parts were a little change. At a bowing posture($M_2$) in comparison with an upright posture($M_0$). Back hip girth, knee length, hip length and leg length increased and the other parts were not change. At a working posture on a chair($M_1$) in comparison with an upright posture($M_0$). 2. The overall clean room garment was made increasing on the changes of part of a body through measuring and body measurement. 3. From the test of the function, it became known that the devised clean room garment was superior to the existing one in the parts of neck, shoulder, armpit and elbow at a working posture on a chair($M_1$), in the parts of neck, shoulder, and armpit at a bowing posture($M_2$), and the armpit at a posture of raising hands($M_3$). The appearance was better on the whole. 4. From the examination of photographs, the waist line of the devised clean room garment was not so much pulled up as that of the existing one on moving. And when sitting down on a chair, the waist line of the existing one was pulled down while that of the devised one had no change. As above, we investigated the actual conditions of wearing the clean room garment and measured the body's changes according the various actions. So we applied these results to the devised clean room garment but we couldn't research the clean mom effect of it owing to not obtaining the measuring instrument. The aspect of ergonomics liked the feeling of wearing and fitted to the action must be given consideration to the clean room garment, and simultaneously the dust-resistant effect must be taken into consideration in order to improve the quality of the goods. Therefore, we think it should be continued the research on the dust-resistant effect, material, washing method, quality control, and size along with the aspect of ergonomics.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.56-64
• /
• 1996

C,H,OH system is widely used for producing synthetic beverages and pharmaceuticals. Calcium hydroxide suspension was used to callhol the morphology of calcium carbonate, and the charactenstics of the formahan and crystsllizatian of calcium cilrbonate by adding ethylenc glycol were determined A reaclor was made with attaching a ceramic bubble plate, and lhe eleclrical conductivity was continously monitored during the rcaction with CO, gas. A part of the suspension was separated and powdered at the transition point. XRD and electron microscopic observation showed that the intermedmte and final products were vilterite, ;~r;lganite and calcite. In this study, the volumc of the ethylene glycol added to CH,OH was fixed a1 10 vol\ulcornerh. The valumc of the suspension was 500 ml, and the changes oi characteristics were shdied along with variims cnntents(l0-50 g) of calcium hydroxide. Except m the case of 10 g of calcium hydroxide at the crystallization stagc, all of products showed gelation. Tne marc the calcium hydroxide the shorter the formation time. Alsa. the farmalion of spherical valcrile ivas obsemcd when 30 g Ca(OH), was added. Tne vaterite(a compound material) can bc synthesised under alnbienl pressure and lempcmhre m a C,H,OH system by morphology control. Even though the vateritc was meta-stable phasc and could bc changed to calcitc easily, the stable and spherical vateritc was observed by using G5 glass fillers and vacuum dricrs.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.277-294
• /
• 2010

The Seosanmaaesamjonbulsang (National Treasure No. 84) consists of light gray and coarse to mediumgrained biotite granite with partly developed pegmatite and quartz vein. The host rock is divided into dozens of rock blocks with various shape along irregular discontinuity plane. The evaluation results of discontinuity systems reveal that the host rock were exposed to instable sloping environments. Results of deterioration diagnosis show that the degree of damage has been made worse by physical weathering and surface discoloration laying stress on part that vertical and horizontal joints are massed. Generally, deterioration rate of the triad Buddha surface cover with 42.7%, however, the rate of physical weathering and surface discoloration are subdivided to 9.6% and 33.1%, respectively. Ultrasonic measurements indicate that the triad Buddha was reached highly weathered grade in general. And the rock material was weaken to show low velocity zone of 1,000m/s along irregular joint systems. Indoor and outdoor mean relative humidity of the shelter was recorded more than 70% during every season, and high frequency appears in high relative humidity range over 95%. Such environments seem to have produced dew condensation on the rock surface with rainfall and supply water, promoted physical, chemical and biological weathering along crack and joint, resulting in high permeation of water and percentage of water content. Therefore, it is judged that for scientific conservation of the triad Buddha it needs environment control through persistent preservation environment monitoring including water problem.