Acknowledgement
이 연구는 2022년 산업통상자원부 및 한국산업기술평가관리원(KEIT) 연구비 지원에 의하여 수행 되었습니다. (20018960, 글로벌 시장 진출을 위한 자동차 3차원 터치 일체형 감성조명 모듈용 자기유도 표면처리기술 개발)
References
- H. J. Ko, H. C. Kim, and H. Y. Yun, "Study on Fabrication of 3D MID Cruise Control Switch", J. Mechanical Science and Technology, 1796-1797 (2013).
- H. Y. Yun and H. C. Kim, "Basic Research For The 3DCD (3D Circuit Devices)", J. Korean Soc. Precis. Eng., 31(12), 1061-1066 (2014). https://doi.org/10.7736/KSPE.2014.31.12.1061
- H.-A. Yang, M. Wu, and W. Fan, "Localized induction heating solder bonding for wafer level MEMS packaging", J. Micromech. Microeng., 15(2), 394-399 (2005). https://doi.org/10.1088/0960-1317/15/2/020
- Y.-S. Son, "Heat Transfer Analysis of Forced Convection-Infrared Reflow Soldering Process with Air Injection", J. Welding and Joining, 16(4), 98-108 (1998).
- J.-K. Choi, H.-S Bang, S. R. Rajesh, and H.-S. Bang, "Joining characteristics Sn-3.5Ag solder bump by induction heating", KWS, 47, 181-183 (2006).
- Y.-H. Lee, K.-Y. Lee, and T.-S. Oh, "COG(Chip On Glass)Bonding Technology for Flat Panel Display Using Induction Heating Body in AC Magnetic Field", J. Microelectronics & Packaging Society, 12(4), 315-321 (2005).
- J.-G. Kang, J.-H. Lee, and J.-G. Shin, "Numerical analysis of induction heating for the application of line heating", Journal of the Society of Naval Architects of Korea, 37(3), 110-121(2000).
- D. K. Cheng, "Field and Wave Electromagnetics", 2nd Ed., Addison Wesley, USA (1979).
- J. Jin, "The Finite Element Method in Electromagnetics", John Wiley and Sons (1979).
- W. H. Hayt, Jr. and J. A. Buck, "Engineering Electromagnetics", 5th Ed., The MaGraw-Hill Companies, USA (1990).
- S. Zinn, and S. L. Semiatin, "Elements of Induction Heating: Design, Control, and Applications", Electric Power Research Institute ; ASM International, Palo Alto, CA (1988).
- J.-K. Choi, K. Nam, J. K. Kim, H. Choi, and S.-S. Lee, "An Optimal Frequency Condition for An Induction Hardening for An Axle Shaft using Thermal-Electromagnetic Coupled Analysis", Trans. Korean Soc. Mech. Eng. A, 40(2), 207-212 (2016). https://doi.org/10.3795/KSME-A.2016.40.2.207
- T. L. Bergman, A. S. Lavine, F. P. Incropera, and D. P. Dewitt, "Introduction to Heat Transfer", 2nd Ed., John Wiley and Sons, USA (1990).
- E.-Y. Yoon, S.-W. Kim, Y.-S. Yang, S.-J. Lee, and G.-H. Lee, "A study on PCB Failure prediction of forced convection reflow soldering process with Thermal-Structure coupled simulation", J. The Korean Society of Mechanical Engineers, 593-596 (2009).
- Z. Yin, F. Sun, and M. Guo, "The fast formation of Cu-Sn intermetallic compound in Cu/Sn/Cu system by induction heating process", Materials Letters, 215, 207-210 (2018). https://doi.org/10.1016/j.matlet.2017.12.102
- D. Seehase, C. Kohlen, A. Neiser, A. Novikov, and M. Nowottnick, "Selective Soldering on Printed Circuit Boards with Endogenous Induction Heat at Appropriate Susceptors", Periodica Polytechnica Electrical Engineering and Computer Science, 62(4), 172-180 (2018). https://doi.org/10.3311/PPee.13277
- M. Drienovsky, M. Palcut, P. Priputen, E. Cuninkova, O. Bosak, M. Kubliha, and L. R. Trnkova, "Properties of Sn-Ag-Cu Solder Joints Prepared by Induction Heating", Advances in Materials Science and Engineering, 1724095 (2020) .
- M. Li, H. Xu, S.-W. R. Lee, J. Kim, and D. Kim, "Eddy Current Induced Heating for the Solder Reflow of Area Array Packages", IEEE Transactions on Advanced Packaging, 31(2), 399-403 (2008). https://doi.org/10.1109/TADVP.2008.923385
- H. J. Han, J. P. Jung, B. Y. Ha, Y. E. Shin, J. Y. Park, and C. S. Kang, "Reflow Soldering Characteristics of Sn-3.5Ag Balls for BGA", Journal of Welding and Joining, 19(2), 39-44 (2001).