• 한국산림과학회지
• /
• 제3권1호
• /
• pp.18-22
• /
• 1963

1. Objects The experiments of catalytic aharcoaling were carried out for the fallowing purposes. (1) To determine the economically desirable amount of catalytic materials to be used when a catalytic charcoaling is practiced. (2) To observe the rate of carbonization of non-treated charcoal wood when the catalytic charcoaling is proceeded in the same charcoal pit. 2. Meterials (1) Small sample chips made of oak (Q. accutissima Carr.), measured by 0.5cm in width and thickness, respectively, and 1cm in length, were used as charcoal wood in each experiment. (2) Ammonium chloride was used as a catalytic material and electric kiln as a charcoaling apparatus. 3. Experiment (1) The sample chips were put into a electric oven for three hours at the temperature $60^{\circ}{\sim}70^{\circ}C$ in order to reduce some water contents. (2) Oven dried sample chips were then soaked for an hour in solution of ammonium chloride. Three kinds of solution were prepared, that is, 2.5%, 5%, and 10%, solution in which the amount of ammonium chloride used was weighed at the rate of 0.5%, 1.0%, and 2.0% to the total weight of the sample chips, resppectivelly. (3) Soaked sample chips were put in the air for 12 hours to reduce some water contents, and then were put into electric oven for 2 hours at the temperature $105^{\circ}{\sim}110^{\circ}C$. (4) Dried sample chips were kept in a desiccator with control sample chips which were treated excarly the same process as the treated sample chips except only not using the ammonium chloride in the process of soking. (5) Sample chips kept in the desiccator were used at random in each charcoaling experiment. (6) Charcoaling in the electric kiln were carried out by using small crucibles with complete cover to reduce the amount of ash. At each charcoaling experiment four crucibles filled with sample ships, weighed about 20gr, were put into electric kiln. The charcoaling was continued for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. (7) In order to investigate the influence given by the gases produced during the catalytic charcoaling to the rate of carbonization of non-treated sample chips, the following experiment was done. (a) A crueible was divided into two parts by inserting a fine iron net at the middle of the crucible, and then non-treated sample chips, weighed about 10gr, were put in the upper part of the crucible and treated sample chips, weighed also about 10gr, were put in the under part. (b) The crucibles filled with two kinds of sample chips were put into a electric kiln for an hour at the temperature $400^{\circ}{\sim}450^{\circ}C$. 4. Results. Results for two replications (with four crucibles in one replication) for each experiment designed are as follows : (1) The rats of carbonization of the non treated sample chips, and that of the treated sample chips with ammonium chloride at the rate of 1.5%, 1.0%, and 2.0% to the total weight of the sample chips used were averaged at 19.85%, 22.63%, 24.14%, and 26.60%, respectively. (2) The rats of carbonization of the non-treated sample chips were averaged at (a) 20.04% (0.5% treatment), (b) 20.28% (1.0% treatment), and (c) 20.61% (2.0% treatment) when the treated sample chips were carbonized in the same crucible.

• 산업경영시스템학회지
• /
• 제30권3호
• /
• pp.165-173
• /
• 2007

A space launch vehicle system represents a typical example of large-scale multi-disciplinary systems, consisting of subsystems such as mechanical structure, electronics, control, telecommunication, propulsion, material engineering etc. A lot of cost is required to develop the launch vehicle system. A precise planning of R&D cost is very essential to make a success of the launch vehicle development program. Especially in the early development phase of a new space launch vehicle system, cost estimation techniques and analogy from past similar development data are very useful methods to estimate a development cost of the launch vehicle system. Now Korea Aerospace Research Institute is in charge of the KSLV-I (Korea Space Launch Vehicle-I) Program that is a part of Korea National Space program. KSLV-I Program is a national undertaking to develop launch capabilities to deliver science satellites of a 100kg-class into a low earth orbit. It is hereafter, going to plan to develop a new korean space launch vehicle. In this paper, first the development costs of well-known launch vehicles in the world are presented to provide a reference to make a development plan of a new launch vehicle. Second this paper introduces the present status of cost estimation applications at NASA. Finally this paper presents the results from application of a TRANSCOST, a parametric cost model, to derive a cost estimate of a new launch vehicle development, as an example.

• 간호행정학회지
• /
• 제4권2호
• /
• pp.475-487
• /
• 1998

This is a study to search for the ethical basis for valid informed consent of organ donors. It is an admirable action that a person give his own body part or organ as a gift to another person. The organ for transplantation can be removed only when the donor consents voluntarily to donation. It is recently proposed as the need for organ transplantation is increased that organs can be harvested although the consent of deceased cannot be obtained. This may raise many moral issues because human beings all have an unalienable right to control their own bodies. The principle of autonomy is usually regarded as an ethical basis for informed consent. However, some people criticize that the principle of autonomy requires a person and his decision to be autonomous (but there are many patients who aren't autonomous due to their confusion or unconscious condition in a clinical situation). or this principle can foster indifference to patients needing help: thus respect for principles of care and beneficence is necessary. When we consider the complexity of making a decision about organ donation. the principle of autonomy should be replaced by the principle of respect for individual autonomy. as expressed by Childress (1990). This principle requires the care givers to respect the client's individual decisions. The elements of informed consent are threshold elements: competence to understand and decide. voluntariness in deciding: information elements: disclosure of material information. recommendation of a plan. understanding of disclosure and recommendation: and consent elements: decision in favor of a plan. authorization of the chosen plan. In cases of living donors. the elements of competence and voluntariness are more important than the others. So only an adult can give a recipient his own body part. but it should be forbidden to harvest from minors or protected adults (i.e. developmentally disabled person However. when organs are removed from a cadaver donor. we ought to respect the donor's decision. So we ought to try to seek donor cards or any documents expressing the donor's opinion about organ transplant. All health care givers ought to disclose donor information about organ transplantation clearly enough for the donor to understand it and to be able to weigh the harms and benefits. We are going to propose 'the subjective standard' as the ethical standard of disclosure. This standard will assure that patients have enough information to be able to decide autonomously from their own position. Care givers have to consider the method of disclosure because donors can be influenced by it positively or negatively, Establishment of the Hospital Committee is recommended. because medical professionals will have a chance to discuss the procedure of decision and the validity of harvesting a organ from a person.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7549-7554
• /
• 2015

본 이 연구의 목적은 부유 기술을 이용하여 제형이 위에 더 오래도록 머무르면서 약물을 지속적으로 방출하는 이중정을 개발하는 것이다. 실험방법으로는 메트포르민을 주 약물로 선정하였는데, 그 이유는 메트포르민은 주로 소장 상부에서만 흡수되는 좁은 흡수 영역 대를 가지고 있는 점, 용해도가 매우 높아 약물 방출을 조절하는 것이 쉽지 않은 점 등 때문이다. 정제의 부유를 위한 가스를 생성하는 부분과 약물의 방출을 조절하는 부분의 간섭을 최소화하기 위해 이중정 타정 기를 사용해 이중정으로 제조하였으며, 정제의 모양, 질량 및 경도를 측정하였고, 부유정의 중요한 요소인 부유 촉발시간과 부유유지 시간을 평가하였다. 또, 약물의 방출 조절을 평가하기 위해 용출시험을 시행하였으며, 그 결과를 시판되고 있는 메트포르민 서방성 제제인 Glucopharge XR$^{(R)}$과 비교평가 하였다. 그 결과, 부유 촉발제인 $NaHCO_3$ 및 약물 방출 조절제인 hydroxypropyl methylcellulose (HPMC)의 사용량에 따라 13초의 부유 촉발시간, 10시간 이상의 부유 유지시간 및 시판 제제와 매우 유사한 약물 방출 거동을 확인할 수 있었다 ($f_2$: 89.6). 결론적으로 메트포르민을 함유한 위 체류 이중정을 성공적으로 개발할 수 있었으며, 그로 인해 메트포르민의 치료효과도 극대화 할 수 있을 것으로 예상된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.61-68
• /
• 2020

본 연구에서는 지하 콘크리트 구조물의 누수 균열에 사용되는 주입형 누수보수재료의 품질관리 방안으로 규격화된 국제표준 ISO TS 16774 ｢Part 3 Test method for water(wash out) resistance｣와 KS F 4935 ｢점착유연형 고무 아스팔트계 누수보수용 주입형 실링재｣를 이용하여 현재 우리나라 누수보수현장에서 사용하고 있는 주입형 누수보수재료 5계열(합성고무계, 시멘트계, 아크릴계, 에폭시계, 우레탄계) 3종류씩, 총 15종류의 보수재료에 대한 지하 콘크리트 구조물이 처한 지하수의 유동성에 관한 유실 대응력의 안정성을 연구·검토하였다. 그 결과, KS F 4935 규격에서 규정하고 있는 "질량 변화율이 -0.1% 이내"의 성능 기준으로 고찰하면 합성고무계 RG-2, 우레탄계의 UG-1을 제외하고 나머지 13Type 보수재료는 다소 지하수의 유동성에 따른 유실 저항력의 안정화 방안 검토가 필요 할 것으로 판단된다. 본 연구 결과는 콘크리트 구조물의 균열 부위에 사용되는 보수재료의 선정에 있어 기본 지표로 사용가능 할 것으로 판단된다. 또한, 추후에 연구 개발 되는 보수재료의 품질 향상에 반영할 수 있는 기준 자료의 활용을 기대할 수 있다.

• 한국지반환경공학회 논문집
• /
• 제21권9호
• /
• pp.25-32
• /
• 2020

지반의 하부에 설치되는 지하매설물은 중요한 토목구조물로서 상·하수도관, 지중전력선, 각종 통신선로, 도시가스관 등이 이에 해당한다. 이런 지중매설물들은 시공 시 집중강우, 차량하중 등과 같은 외부적인 요인에 의해서 위험에 노출될 수 있고 이로 인한 피해가 발생할 수 있어 적절한 뒤채움재의 선정과 시공이 중요하다. 현재 주로 사용하는 공법으로는 지하매설물 주변을 흙으로 메우고 다짐을 하는 방법이 사용되고 있는데 이는 매설관 하부의 다짐이 어렵고 다짐효율이 떨어져서 지하매설물의 안정성을 저감시키고 이로 인해 각종 파손이 발생한다. 또한 개착 시 원지반 교란에 따라 지반의 강도가 저하되고 시공 과정이 복잡하며 공기가 길어져 공사비가 증가하는 등의 단점이 있다. 이러한 문제를 해결하는 방법 중 하나가 유동성 채움재를 활용하는 것이다. 유동성 채움재는 자기 수평능력, 자기다짐, 유동성, 인위적인 강도조절, 유지보수를 위한 재굴착이 가능한 저강도 발현 등의 장점을 가지고 있다. 본 연구에서는 지하매설물을 설치한 후 되메움을 하는 재료로서 해양점토와 고화재 및 현장에서 발생하는 현장토를 활용한 유동성 채움재의 특성을 규명하기 위하여 일축압축강도 시험과 유동성 시험을 수행하였으며, 동결에 의한 강도 특성을 파악하기 위하여 동결융해시험을 수행하였고 채움재가 지중배관의 부식에 미치는 영향을 검토하기 위하여 전기비저항시험과 pH시험을 수행하였다.

• 보존과학회지
• /
• 제37권5호
• /
• pp.557-566
• /
• 2021

본 연구에서는 전통방식으로 재현한 아교를 대상으로 가죽부위에 따른 다양한 추출조건별 특성변화를 확인하고자 하였다. 평균분자량(Mw, Mz)은 추출시간에 따라 증가하였으며, 다분산성(PDI)은 추출시간에 따라 증가하다 추출 48시간에서 감소하였다. 평균분자량과 PDI 모두 가죽부위별 차이는 없었지만, 개체별로는 총분자량 차이가 있었다. 추출물의 차이는 아교(젤라틴)를 대표하는 Amide 영역들을 통해 비교한 결과, 추출시간에 따라 뱃가죽의 삼중나선구조가 파괴되는 것이 확인되어 가죽부위별 차이점이 확인되었다. 물성평가 결과, 황색도는 추출시간이 증가할수록 높아졌고, 점도는 분자량의 변화와 비례하지 않았다. pH는 화학적 전처리가 없는 생산아교의 일반적인 특징과 동일하게 나타났다. 각 추출조건에 따른 생산아교의 특징들을 전체적으로 분석한 결과, 소 개체별 차이가 큰 영향을 미쳐 소량 추출의 경우 일정한 품질을 유지하기 힘들다는 것을 확인하였다. 추후 더 다양한 추출조건에 대한 연구가 진행되어 일정한 품질을 가진 전통아교의 보급을 기대한다.

• 한국인쇄학회지
• /
• 제30권3호
• /
• pp.89-114
• /
• 2012

For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

• 농촌의학ㆍ지역보건
• /
• 제1권1호
• /
• pp.10-21
• /
• 1976

The traditional application of night soil to vegetable gardens and rice paddies results in a most wide spread condition of parasitism, with a variety of helminths found in Korea. In addition to the above fact, the peculiar habit of the consumption of raw vegetables, fish, crustaceans and mammals provides a means of infestations of helminths. During the last sixty years numerous reports were found on the prevalence of helminths amongst the Korean population in different parts of the country, and it was generally recognized that ascariasis, hookworm disease, filariasis, clonorchiasis and paragonimiasis constitute the important helminthic disease in Korea. In practical measures of parasite control activities the main measures are summarized as mass-treatment, night-soil disposal and transmission control. Among the three, the mass-treatment has been commonly applied, however, no reduction of transmission has been obtained by treatment of a population. Therefore, the ultimate eradication of parasites will depend upon the application of comprehensive environmental sanitation measures. The basic environmental measures will be concerned with (a) the safe disposal of human excreta, (b) the provision of adequate and safe water supplies in such a way as to promote a higher standard of personal hygiene in the population, and (c) the prevention of food contamination by faecal material. Additional environmental measures will deal with the improvement of housing and housing hygiene and with general community development. Community development means social and cultural as well as economic development. The control measures on the parasitic endemic diseases, such as clonorchiasis and paragonimiasis are the good examples for community health development in Korea. The control of Clonorchis and Paragonimus infections are theoretically very simple, as the infection can only invade the human body by way of encysted metacercaria which are taken into the body when eating passive intermediate hosts(fishes, crabs and crayfishes). Although prophylactic measures in the case of the infections deal with above merely consist the fishes in cooking or submerging in hot water before eating them, it is exceedingly difficult to carry out such simple measures in face of century old traditions, to which the relatively primitive population clings with great tenacity. There is no one universally applicable method of control. The choice of methods must be dictated by the nature of the environment. the habit and custom of the people. the pattern of transmission and the resources of the country. There must exist a well organized public health infrastructure. Since a control programme is of necessity on a longterm basis and continuity in its implementation is essential. An investigation should be made on the prevalence of the diseases and its relationships to irrigation engineering, freshwater ecology, agricultural methods, hydro-electric schemes, and the development of communities in affected areas. In conclusion, however. the control of clonorchiasis and paragonimiasis in Korea is not an impossible task. A combination of efforts with major emphasis on health education and mass chemotherapy coupled with governmental aid in enforcing legislative public health measures could reduce the diseases. Health education in particular attempts following four things: (a) It supplies a person with enough general knowledge about a disease to make the preventive measures. (b) It makes a person feel sufficiently about the importance of his own health to make him alter his behavior and adopt these preventive measure. (c) It makes him concerned for the health others. (d) It tries to make him feel so strongly about the first three that be supports and even initiates preventive action by the community. Educational efforts should be directed primarily toward school children because it is during the early years that most persons become infected, and also because children are less entrenched in their food habits so that, the educational process should be involved at various levels in successive changes of knowledge, attitude, beha viour, habit and custom of their lives. The most parasitic endemic diseases are related to community diseases. In caring for a sick community. the first stage is to gather epidemiological data, the next is to make inferences from it-to make the community diagnosis. The third is to prescribe community treatment or community health action part of a community health action programme. The community health action is the sum of the steps decided upon to remedy the critical features revealed by the community diagnosis. Action takes various forms; health education is the most important.

• 감성과학
• /
• 제18권3호
• /
• pp.17-24
• /
• 2015

본 연구에서는 써멀 마네킹 실험을 통해서 탄화지르코늄(ZrC) 혼입사로 만들어진 니트와 직물 의류의 발열 특성을 연구하였다. 써멀 마네킹 측정에 의한 감성 및 인지기능 열적특성이 분석되었으며 광발열 실험결과와 비교하였다. ZrC 혼입 직 편물의 표면온도는 일반 PET 직 편물 보다 각각 $4^{\circ}C$와 $2^{\circ}C$ 높은 값을 보였다. 그리고 이들 직 편물 의류의 광조사상태에서 써멀 마네킹 실험에 의한 발열특성을 나타내는 보온성 Clo치는 각각 0.18과 0.08 높은 값을 보였다. 이 결과는 이성분 필라멘트의 심사부에 혼입된 ZrC에서 방사된 원적외선에 기인 된 것을 $6{\mu}m{\sim}20{\mu}m$범위의 원적외선 방사강도 결과와 EDS 원소분석에 의해 확인함으로써 가능하였다. 그리고 ZrC 혼입에 의해 직물의 압축성이 낮아지고 굽힘강성이 높은 값을 보임으로써 촉감 특성은 다소 부족함을 보였다. 그러나 ZrC혼입 직 편물의 발열특성 발현을 써멀 마네킹 측정에 의해 확인함으로써 인텔리전트 의류로서의 적용 가능성을 확인하였다.