• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.625-639
• /
• 2019

Microplastics are one of the substances threatening the marine ecosystem. Here, we summarize the status of research on the effect of microplastics on marine life and suggest future research directions. Microplastics are synthetic polymeric compounds smaller than 5 mm and these materials released into the environment are not only physically small but do not decompose over time. Thus, they accumulate extensively on land, from the coast to the sea, and from the surface to the deep sea. Microplastic can be ingested and accumulated in marine life. Furthermore, the elution of chemicals added to plastic represents another risk. Microplastics accumulated in the ocean affect the growth, development, behavior, reproduction, and death of marine life. However, the properties of microplastics vary widely in size, material, shape, and other aspects and toxicity tests conducted on several properties of microplastics cannot represent the hazards of all other microplastics. It is necessary to evaluate the risks according to the types of microplastic, but due to their variety and the lack of uniformity in research results, it is difficult to compare and analyze the results of previous studies. Therefore, it is necessary to derive a standard test method to estimate the biological risk from different types of microplastics. In addition, while most of the previous studies were conducted mostly on spheres for the convenience of the experiments, they do not properly reflect the reality that fibers and fragments are the main forms of microplastics in the marine environment and in fish and shellfish. Furthermore, studies have been conducted on additives and POPs (persistent organic pollutants) in plastics, but little is known about their toxic effects on the body. The effects of microplastics on the marine ecosystems and humans could be identified in more detail if standard testing methods are developed, microplastics in the form of fibers and fragments rather than spheres are tested, and additives and POPs are analyzed. These investigations will allow us to identify the impact of microplastics on marine ecosystems and humans in more detail.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.411-417
• /
• 2017

This study was conducted to establish the analysis method for the contents of choline in infant formulas and follow-up formulas by ion chromatograph (IC). To optimize the method, we compared several conditions for extraction, purification and instrumental measurement using spiked samples and certified reference material (CRM; NIST SRM 1849a) as test materials. IC method for choline was established using Ion Pac CG column and 18 mM $H_2SO_4$ mobile phase. The parameters of validation were specificity, linearity, LOD, LOQ, recovery, accuracy, precision and repeatability. The specificity was confirmed by the retention time and the linearity, $R_2$ was over 0.999 in range of 0.5~10 mg/L. The detection limit and quantification limit were 0.14, 0.43 mg/L. The accuracy and precision of this method using CRM were 95%, 2.1% respectively. Optimized methods were applied in sample analysis to verify the reliability. All the tested products were acceptable contents of choline compared with component specification for nutrition labeling. The standard operating procedures were prepared for choline to provide experimental information and to strengthen the management of nutrient in infant formula and follow-up formula.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.99-106
• /
• 2008

We examined the effects of crude and eight pure material (${\beta}$-sitosterol, ${\beta}$-sitosterol-${\beta}$-D-glucoside, 1-tetratriacontanol, hentriacontane, orizaterpenoid, stigmas-5-en-$3{\alpha}$ 26-diacetate, stearic acid, myristic acid), extracted from rice hull, on growth inhibition of toxic cyanobacterium, Microcystis aeruginosa NIER 10010. Strains of M. aeruginosa and Daphnia magna, obtained from the NIER (Korea) and BBE (Germany), were cultured in the CB medium with hard water. For all four treatment concentrations 0, 10, 100 and $1,000{\mu}g\;L^{-1}$) of the crude extract, the cell number of M. aeruginosa was reduced by $59{\sim}73%$ during the 7-day test period. Among eight kinds of pure extracts, ${\beta}$-sitosterol-${\beta}$-D-glucoside, hentriacontane and orizaterpenoid $(1,000{\mu}g\;L^{-1})$ exhibited relatively higher growth inhibition compared with other pure extracts. The mixture of three pure extracts (${\beta}$-sitosterol-${\beta}$-D-glucoside, hentriacontane and orizaterpenoid) showed the highest growth inhibition at $1,000{\mu}g\;L^{-1}$. Therefore, the synergistic effect was significantly highlighted by a mixture of the three pure extracts (p<0.05). Under the condition of $1,000{\mu}g\;L^{-1}$ in the crude extracts, D. magna exhibited survival rate by >85% for 96 hours. In conclusion, the growth inhibition of M. aeruginosa was probably attributed to the synergistic effect of various compounds extracted from the rice hull.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.4 s.42
• /
• pp.85-102
• /
• 2006

The objectives of this study were to classify of life style of secondary school girl students, to investigate the relationships between life styles, attitude toward appearance and clothing attitude. The method of this study was survey research by using questionnaires. Subjects were 658(middle school students 327, high school students 331) girl students located in Jeollabukdo province. In this statistical analysis, SPSS 11.5 for Windows program was utilized to calculate frequency, mean, cronbach's ${\alpha}$, factor analysis, t-test, Pearson's correlation, multiple regression analysis. The results of this research were as follows: The results of analysing the factors to the response lifestyles, attitude toward appearance and clothing attitude emerged five dimensions(digital orientation, material orientation, positive activity, achievement orientation, frugality), three dimensions(needs conformity value toward appearance), five dimensions(fashion pursuit, gender attractiveness, self-expression, aesthetic, and modesty). High school girls' students showed higher digital orientation and positive activity life styles, attitude toward appearance, clothing attitude except of modesty. Clothing attitude variables except of modesty had positive correlations with lifestyles and attitude toward appearance. However, modesty of clothing had negative correlations with life styles and attitude toward appearance. As a conclusion, secondary school girl students' life styles and attitude toward appearance constituted important characteristics which could affect clothing attitude directly.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.146-152
• /
• 2005

The activated carbon was produced from Sancheong bamboo by carbon dioxide gas activation methods. The carbonization of raw material was conducted at $900^{\circ}C$, and $CO_2$ activation reactions were conducted under various conditions: activation temperatures of $750-900^{\circ}C$, flow rates of carbon dioxide $5-30cm^3/g-char{\cdot}min$, and activation time of 2-5 h. The yield, adsorption capacity of iodine and methylene blue, specific surface area and pore size distribution of the prepared activated carbons were measured. The adsorption capacity of iodine (680.8-1450.1 mg/g) and methylene blue (23.5-220 mg/g) increased with increasing activation temperature and activation time. The adsorption capacity of iodine and methylene blue increased with the $CO_2$ gas quantity in the range of $5-18.9cm^3/g-char{\cdot}min$. But those decreased over those range due to the pore shrinkage. The specific volume of the mesopore and macropore of bamboo activated carbon were $0.65-0.91cm^3/g$. Because of this large specific volume, it can be used to the biological activated carbon process. Bamboo activated carbon phisically adsorbed the $CO_2$ of maximum 106 mg/g-A.C in the condition of 90% $CO_2$ and adsorption temperature of $20^{\circ}C$. The $CO_2$ adsorption ability of bamboo activated carbon was not changed in the 5 cyclic test of desorption and adsorption.

• Hwankyungkyoyuk
• /
• v.6 no.1
• /
• pp.63-99
• /
• 1994

The international environmental activities and environmental education began in 1970's. Environmental education in Korea was emphasized since the Forth National Curriculum. 'The Environmental Education Curriculum' will be separated as one of the most important parts in the Sixth National Education Curriculum in Korea. The purpose of this study was development. of 'Environmental Science' of high school appropriate to Sixth National Education Curriculum. First step was to state goals of environmental education in detail based on analysis of goals about environmental education in our country and other countries. Second was to analyse seven environments-related texts of Korea, America and England. Third, to measure how much environmental education has achieved in Fifth National Curriculum of Korea. Fourth, to develop a new environmental text of high school level. Fifth, to verify the effect of developed environmental text. The environmental part of 'Science I'(unit V. Life and Environments) and high school environments-related reference text(Survival and Environments) in Korea, American knowledges. American 'Environments' was stressed in many skills but they didn't include various teaching strategies. On the other hand, American 'Science-Technology-Society(S-T-S)' and British 'Science and Technology in Society(SATIS)' were stressed in knowledges and skills, and they included many teaching strategies and student actions. American 'S-T-S' was the only one stressed in values and attitudes. And all seven texts were not interested in behaviors and participations. To measure the achievement of environmental education by questionnaire, 497 high school students in total were selected from five different schools. Actually, most students had a positive thinkings and attitudes in their hearts about environmental problems, about environmental problems, but many of them did not take actions to solve environmental problems and to protect environments. The higher the score students got in 'knowledges and informations', the higher the score in 'skill'. It implies that learning of skills is based on learning of knowledges and informations about environments. On the other hand, much knowledges and information about environments has not always ensured positive thinkings and attitudes or active behaviors and participations to solve environmental problem. In view that ultimate aim of environmental education is forming responsible environmental behaviors and the goals of values and behaviors are as important as knowledges and skills. A new environmental text of high school level was developed and it was based on analysis of seven texts and environmental education in Fifth Korean Curriculum. This text have seven units, 1. Habitates : What're the meanings?, 2. Nuclear Energy : Can't be Avoid?, 3. Acid Rain : What're the Messages?, 4. Ethanol : Is this Future Fuel?, 5. Wastes : A New War!, 6. What're the National and Gloval Environmental education and avoided from the array of knowledges. Therefore included various teaching strategies and independent actions of students. 'Open-ended value learning' and 'free behavior learning' in text were special learning parts for aquisition of values and formation of behaviors. To verify the effects. of new developed environmental text, the direct learning was carried out by 286 students in total. Post test scores of experimental groups per each units were significantly higher than those of control groups from five different schools were as follows. For validity of selecting contents for units, 74% of respondent replied positively. For classification and presentation of four goal-groups, 90% replied positively in validity and 82%, in utility. For validity of various teaching strategies, 88% and for the degree of including student-centered independent actions, 86% replied positively, For importances and expected effects of 'open=ended value learning' and 'free behavior learning', showed positive responses respectively, 88%, 92% Therefore this text is effective to achieve four goals of environmental education equally.

• Food Science of Animal Resources
• /
• v.22 no.3
• /
• pp.240-246
• /
• 2002

The seasoned pork with soy sauce(SS) or Kochujang(SK) was manufactured using hind and fore leg as main raw material and the quality characteristics and shelf-life were investigated during storage at 5$\^{C}$ and 10$\^{C}$ after having packaged with air. The initial total aerobic plate counts(APC) of SS and SK were 5.24 and 5.75 log10 CFU/㎠, respectively. APC exceeded 7 log10CFU/cm2 after 10 days at 5$\^{C}$ and 6 days at 10$\^{C}$ far SS, and after 6 days at 5$\^{C}$ and 4 days at 10$\^{C}$ for SK, respectively. In the sensory test, the SS samples stored at 5$\^{C}$ and 10$\^{C}$ were assessed as lower than 3.0 points, the criterium of consumer acceptability, after 10 and 8 days, respectively. In the case of SK samples, the point of this time was at day 10 and 6, respectively when they were stored at 5$\^{C}$ and 10$\^{C}$. As storage time extended, pH and water content tended to decrease. Contrarily, the increase of TBA and VBN values was observed during storage and this was more pronounced at 10$\^{C}$ than at 5$\^{C}$ . The oxygen concentration in the package was 19.8 and 19.9% each for 55 and SK samples at the beginning but it was gradually decreased thereafter. On the other hand, the concentration of carbon dioxide was increased with the extension of storage. Based on the above results, the shelf-lives of seasoned pork were estimated to be 8 days for SS and SK stored at 5$\^{C}$ and 6 days for SS and 4 days for SK stored at 10$\^{C}$.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.563-572
• /
• 2006

In order to propose optimum in-situ treatment for reducing phosphorous release from sediment of stationary lakes, a series of column tests were performed. The sediment used in experiment was very fine clay with a mean grain site $7.7{\phi}$ and high $C_{org}$ contents(2.4%). Phosphorous releases were evaluated in two ways : in lake water(with microbial effect) and in distilled water(without microbial effect). As in-situ capping material, sand and loess were used while Fe-Gypsum and $SiO_2$-Gypsum were used for in-situ chemical treatment. In case of lake water considering the effect of microorganism, phosphorous concentration rapidly decreased in the early stage of experiment but it was gradually increased after 10 days. Flux of phosphorous release for control was $3.0mg/m^2{\cdot}d$. Whereas, those for sand layer capping(5 cm) and loess layer capping(5 cm) were $2.5mg/m^2{\cdot}d\;and\;1.8mg/m^2{\cdot}d$, respectively because the latter two were not consolidated sufficiently. For Fe-gypsum and $SiO_2$-gypsum the fluxes were $1.4mg/m^2{\cdot}d$ which meant that reduction efficiency of phosphorous release was more than 40% higher than that of control. The case capping with complex layer was $1.0mg/m^2{\cdot}d$, which showed high reduction efficiency over 60%. The addition of gypsum($CaSO_4{\cdot}2H_2O$) into the sediment reduced release of Phosphorus from the sediments. Gypsum acted as a slow-releasing source of sulphate in sediment, which enhanced the activity of SRB(sulfate reducing bacteria) and improved the overall mineralization rate of organic matter.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.344-351
• /
• 2006

The purpose of this study was to evaluate the thermal expansion characteristics of injectable ther-moplasticized gutta-perchas and a Resilon. The materials investigated are Obtura gutta-percha, Diadent gutta-percha, E&Q Gutta-percha Bar and Epiphany (Resilon). The temperature at the heating chamber orifice of an Obtura II syringe and the extruded gutta-percha from the tip of both 23- and 20-gauge needle was determined using a Digital thermometer. A cylindrical ceramic mold was fabricated for thermal expansion test, which was 27 mm long, with an internal bore diameter of 3 mm and an outer diameter of 10 mm. The mold was filled with each experimental material and barrel ends were closed with two ceramic plunger. The samples in ceramic molds were heated in a dilatometer over the temperature range from $25^{\circ}C$ to $75^{\circ}C$. From the change of specimen length as a function of temperature, the coefficients of thermal expansion were deter-mined. There was no statistical difference between four materials in the thermal expansion in the range from $35^{\circ}C$ to $55^{\circ}C$ (p > 0.05). However, Obtura Gutta-percha showed smaller thermal expansion than Diadent and Metadent ones from $35^{\circ}C$ to $75^{\circ}C$ (p < 0.05). The thermal expansion of Epiphany was similar to those of the other gutta-percha groups.