• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.71-75
• /
• 1999

An approximate similarity theory has been applied to predict the forming load of non-axisymmetric forging of aluminum alloys through model material tests. The approximate similarity theory is applicable when strain rate sensitivity geometrical size and die velocity of model materials are different from those of real materials. Actually the forming load of yoke which is an automobile part made of aluminum alloys(Al-6061) is predicted by using this approximate similarity theory. Firstly upset forging tests are have been carried out to determine the flow curves of three model materials and aluminum alloy(Al-6061) and a suitable model material is selected for model material test of Al-6061 And then and forging tests of aluminum yokes have been performed to verify the forming load predicted from the model material which has been selected from above upset forging tests, The forming loads of aluminum yoke forging predicted by this approximate similarity theory are in good agreement with the experimental results of Al-6061 and the results of finite element analysis using DEFORM-3D.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.32-33
• /
• 2014

The appropriate selection of a construction material is important considering the effect on the total project cost and quality. However, the methodologies of the existing systems and databases to suggest search results have been analyzed to lack reliability. Therefore, this study suggests a material searching methodology that results in quantitative results using similarity.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.63-70
• /
• 1994

Laser processing workmen should select the working condition for laser cutting of new materials by the preparatory experiments for that material or from the past experiences in cutting of other similar materials. This paper proposes a criterion to determine how much a material is similar to other materials by using the Sugeno fuzzy integral. With the proposed criterion the laser processing workman can objectify the considered material for his decision. The expert system programmer can give the system a high flexibility by experimenting with some materials in a large range of similarity and can support the laser processing workman by offering the similarity between materials.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.204-208
• /
• 2000

An approximate similarity theory has been applied to predict the forming load of non-axisymmetric forging of aluminum alloys through model material tests. The approximate similarity theory is applicable when strain rate sensitivity, geometrical size, and die velocity of model materials are different from those of real materials. Actually, the forming load of yoke, which is an automobile part made of aluminum alloys(Al-6061), is predicted by using this approximate similarity theory. Firstly, upset forging tests are have been carried out to determine the flow curves of three model materials and aluminum alloy(Al-6061), and a suitable model material is selected for model material test of Al-6061. And then hot forging tests of aluminum yokes have been performed to verify the forming load predicted from the model material, which has been selected from above upset forging tests. The forming loads of aluminum yoke forging predicted by this approximate similarity theory are in good agreement with the experimental results of Al-6061 and the results of finite element analysis using DEFORM-3D.

• 한국결정학회지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2008

Dilithio-o-carborane과 dipenyl disulfide를 반응(反應)하여 a phenyl thiolated o-carborane compound가 얻어 졌으며 X-ray crystallography로 밝혀진 이 compound의 구조(構造)와 ab initio 및 density functional theory로 계산(計算)한 이 compound의 구조문(構造間)에 conformational similarity가 있음을 확인(確認)하였다.

• 소성∙가공
• /
• 제11권5호
• /
• pp.430-438
• /
• 2002

This paper suggests the new technology to control metal flow in orther to change of the cold forging from conventional deep drawing forming. This technology can be summarized the complex forming, which consists of bulk forming and sheet forming, and multi-action forging, which be performed double action press. The proposed technology is applied to hub clutch model which is part of auto-transmission for automobile. The purpose of this study is to investigate the material flow behavior of hub clutch through control the relative velocity ratio and the stroke of mandrel and punch using the flow forming technique. First of all, the finite element simulations are applied to analyse optimal process conditions to prevent flow defect(necking defect etc.) from non-uniform metal flow, then the results are compared with the plasticine model material experiments. The punch load for real material is predict from similarity law. Finally, the model material experiment results are in good agreement with the FE simulation ones.

• 한국소프트웨어감정평가학회 논문지
• /
• 제15권2호
• /
• pp.51-57
• /
• 2019

소프트웨어의 저작권 도용이 증가하면서 유사성을 판단을 요구하고 있지만, 분석을 위한 목적물의 확보 및 이동에 대한 신뢰성 확보가 중요시 되고 있다. 감정을 위한 데이터로 사용되는 목적물 자료는 법원 및 경찰서와 같은 분쟁 처리 기관에서 감정인에게 제공되는 핵심적인 데이터이다. 목적물은 분쟁 당사자가 저작권위원회에 제출하고 최종적으로 감정 전문가에게 원본상태로 전달되는 이동 과정을 갖는다. 그러나 분쟁 당사자가 감정 결과에 만족하지 않으면 목적물의 신뢰성에 대한 이의를 제기한다. 특히, 소프트웨어 목적물은 파일 형식으로 제작되어, 변형이나 수정이 가능한 것으로 인식되고 있다. 따라서 목적물에 객관성을 부여하는 방법이 다양한 방식으로 검토되고 있으며, 포렌식이 하나의 방법으로 제안되고 있다. 본 연구는 실제 사례의 감정 프로세스를 통해 목적물의 이동 및 신뢰성을 확보하는 방법을 연구하였다.

• 소성∙가공
• /
• 제10권1호
• /
• pp.67-74
• /
• 2001

The cold forging process to produce a long-neck flange is investigated by using model material test. The two stage process with optimum design condition is examined using plasticine, which is suitable to model steel at room temperature. The similarity theory is employed to estimate the forging load of each sequence by strict application of similarity condition between steel(AISI 1015) and plasticine material The model test results are compared with the simulation results and shows good agreement. The proper forging process with least forming energy can be resulted in $25^{\circ}$ of extrusion semi-die angle.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.142-149
• /
• 2002

In this paper, the metal forming process is caused of rise of the unit cost of production in increase of the lead-time and cost because of manufacturing final product through a few the number of processes. Flow control complex forming is proposed to put into formulation in order to apply cold forging from conventional approximate similarity theory, and the forming loads of the real material(AISI 1008) can be calculated by put at the new similarity formula the load by plasticine model material experiment through hub clutch. In order to reduce lead-time and cost the technology is used to manufacture with lower die of this product. By the application synthetic resin as the raw material, it is have the merit such short lead-time, low cost, good surface finish etc., as compared with the machine work.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1-6
• /
• 2008

Due to the self-similarity of Berkovich and conical indenters, different materials may show the same loaddepth curve for single indentation. In this study, we first compare the load-depth characteristics of conical and Berkovich indenters via finite element method. We also analyze the variation of load-depth curves with angle of Berkovich indenter, indentation parameters, and material properties. With numerical regressions of obtained data, we then propose dual-Berkovich indentation formulae for material property evaluation. The proposed approach provides the values of elastic modulus, yield strength and strain-hardening exponent and corresponding stress-strain curve with an average error of less than 3%. The method is valid for any elastic indenters made of tungsten carbide and diamond for instance.