• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 춘계학술대회
• /
• pp.135-138
• /
• 2006

OLEDs are attractive because of possible application in display with low operating voltage, low power consumption, self-emission and capability of multicolor emission by the selection of emissive material. We investigated the effects of deposition rate on the electrical characteristics, physical characteristics and optical characteristics of OLEDs in the ITO(indium-tin-oxide)/N,N'-diphenyl-N,N'-bis(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline)aluminum($Alq_3$)/Al device. We measured current density, luminous flux and luminance characteristics of devices with varying deposition rates of TPD and $Alq_3$. It has been found that optimal deposition rate of TPD and $Alq_3$ were respectively $1.5{\AA}/s$ from the device structure. An AFM measurement results, surface roughness of the deposited film was the lowest when deposition rate was $1.5{\AA}/s$.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.283-289
• /
• 1998

In the latticed domes which is a set of space frame, buckling is derived if the external force reaches a limitation by the lightness of the material and the minimization of the member section area. these are concerned with a geometric shape, network pattern, the number of layer, and so on. Most of all, the number of layer of the lattice dome is a important factor from the viewpoint of initial and structure design. Therefore this study compared buckling characteristics of single-layer with double-layer latticed domes and investigated the relativity of buckling-stress-ratio and member-density-ratio according to rise ratio to improve that designers could extend the range of .design selection

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2805-2816
• /
• 1994

This paper describes dynamic finite element analyses performed to study the dynamic behaviors of a shipping container under the impact onto rigid target due to the accidental fall from the hight of 9 m. Using two and three dimensional techniques, the shipping container which gave the maximum damage, ten different drop orientations are considered ; at intervals of $5^{\circ}$ from $45^{\circ}$ to $90^{\circ}$ According to the present results, the orientation of the shipping container which gave the maximum damage is $85^{\circ}$ from horizontal for oblique drop in the primary impact. In the optimal design of the shipping container, the impact limiter material must be considered importantly because it's proper selection affects the weight and the manufacturing cost of the shipping container. The analysis of the shipping container in this paper demonstrated that the shipping container is structurally sound relative to the regulatory drop test requirements.

• 대한치과보철학회지
• /
• 제24권1호
• /
• pp.7-16
• /
• 1986

The purpose of this study was to examine the distribution and the bond failure of the acid-etched ceramometal retainer (Maryland Bridge). 126 subjects who treated by faculty and residents of Department of Prosthodontics, Seoul National University Hospital from Dec. 1982 to Dec. 1986 were selected for this study. From the foregoing study author obtained the following conclusions. 1. A total of 135 restorations were placed in the mouths of patients ranging in age from 11 to 10 years (man 62, woman 64). 2. Most restorations were applied to replace anterior teeth. 3. It was found that of the total number of bridges constructed 59.3 percent were the three-unit type. 4. Replacing one tooth mining was the most frequent cases (74.1 percent). 5. Of the total number of cases, 10.4 percent stowed bond failure. 6. The bond failure, author suggest, be due to one or more of mis-fit of framework, occlusion, material in itself, faulty case selection and lack of technique.

• 한국세라믹학회지
• /
• 제43권12호
• /
• pp.751-757
• /
• 2006

Recently, a new type of solid oxide fuel cells has been developed employing extremely thin oxide electrolyte. These fuel cells are expected to operate at significantly reduced temperature compared to conventional solid oxide fuel cells. Accordingly, they may resolve the stability and material selection issues of high temperature fuel cells. Furthermore, they may eliminate the limitations of polymer membrane fuel cells whose operation temperature is under $100^{\circ}C$. In this paper, we review the electrolytes for intermediate temperature operation. Then, we discuss the current development of thin film solid oxide fuel cells that possibly operated at low temperatures.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.383-388
• /
• 2005

In this paper Research development about a micro metal forming manufacturing system has been developed. A micro forming system has been achieved in Japan and it's developed micro press is limited to single forming process. To coincide with the purpose to be more practical, research and development is necessary about the press which the multi forming process is possible. We set the development of the equipment including micro deep drawing, micro punching and micro restriking process to the goal. To achieve this goal, Research about micro forming process to be related to multi process forming must be preceded first. Material selection and analysis about micro forming process are accomplished in this paper. And the basis research to make actual system is accomplished.

• 플랜트 저널
• /
• 제6권3호
• /
• pp.46-52
• /
• 2010

This study investigated the coating failure of the blades of booster fans for the 200 MW flue gas desulfurization plant. Although the arc sprayed SM8222 have been tried as blade coating materials aimed to apply as alternatives of Metcoloy(R)2 due to better corrosion-erosion resistance but it is failed. Bond strength tests and practical field experiences have demonstrated high velocity oxy-fuel(HVOF) coating method with Diamalloy 3004 as an alternative to Metcoloy(R) 2 arc spray.

• 설비공학논문집
• /
• 제18권3호
• /
• pp.262-269
• /
• 2006

Formaldehyde and total volatile organic compounds (TVOC) from building materials have been known as main causes of IAQ problem in Newly-Constructed Multi-Family Houses. Because Multi-Family Houses are built in large quantities in a similar manner, inappropriate selection of building materials and method will detrimental affect IAQ. This research aims to identify major causes of Indoor Air Pollutants in Multi-Family Houses, by constructing Mock-Up & One-Room House. As a result, self leveling concrete, door, and furniture construction is a major cause of indoor formaldehyde increase, and tile bond is TVOC, and urethane water proof is Etylbenzene, and Xylene.

• 한국환경보건학회지
• /
• 제26권2호
• /
• pp.91-96
• /
• 2000

We investigated characters of transdermal therapeutic system(TTS) and the skin permeability of that with applying drug delivery system(DDS). Natural gums were selected as material of TTS. The permeation of natural gums ointment containing drug in rat skin using diffusion cell model. Permeation properties of materials were investigated for water soluble drug such as riboflavin in vitro. We used glycerin, PEG 600 and oleic acid as enhancers. Since dermis has more hydration than the stratum corneum, skin permeation rate at steady state was highly influenced when glycerin was used in riboflavin. The permeation rate of content enhancer and drug was found to be faster than that of content riboflavin only. These results showed that skin permeation rate of drug across the composite was mainly dependent on the property of ointment base and drug. All the gum ointment tested showed good safety. Proper selection of the materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.275-278
• /
• 2005

This study suggests experimental designs for interior products utilizing LEDs that are ideal for expressing diversity of light. It also attempts to develop various products by incorporating economic efficiency and diverse colors of LEDs into interior elements. LED door handles offer a range of 6-color LED lighting strips as a safety lighting system, while multi-function furniture (CUBE-scape) consists of LEDs with double-sided emitted lighting on completely transparent track structures. Both products are designed to make interior elements more user-friendly as they make most use of unique effects of LED such as light vibration and changes. Also the combination of plastic material-Technogel$^{\circledR}$, polypropylene, polycarbonate- maximize the LED lighting effect and diversify the designed item selection.