• Korean Security Journal
• /
• no.2
• /
• pp.125-159
• /
• 1999

The Police is the provider of the Police Service that is the most evident and active. This paper centers on the crime prevention activity of New york City Police Department that is most large and representable in America on account of the enormity of the scale and the material selection. I examine the duty and organization of the City Police Department the Crime Prevention activity of the city police and I research a conclusion.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.428-434
• /
• 2002

Almost all buildings/infrastructures made of composite materials are fabricated without proper design. Unlike airplane or automobile parts, prototype test is impossible. One cannot destroy 10 story buildings or 100 meter-long bridges. In order to realize “composites in construction”, the following subjects must be studied in detail, for his design: Concept optimization, Simple method of analysis, Folded plate theory, Size effects in failure, and Critical frequency Unlike the design procedures with conventional materials, his design should include material design, selection of manufacturing method, and quality control methods, in addition to the fabrication method.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.1273-1274
• /
• 2005

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.551-556
• /
• 1997

Concrete can be defective for several reasons, including inadequate design, material selection or workmanship. Concrete and also dsteriorate or be damaged in use. Consequently existing reinforced concrete may not be functioning as originally intended and designed. So, the evaluate process to investigate initial crack is very important. It is the aim of this study to development and application for diagnosis method on the crack broker out of new constructions.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.75-82
• /
• 2006

Fretting corrosion widely known as a degradation mechanism refers to the combination of fretting wear and corrosion such as oxidation. This paper critically reviews the works published previously on fretting corrosion of electrical connectors. Various experimental approaches such as testing machines, material selection, testing environments, acceleration testing techniques and preventing methods are addressed. Future research prospects are suggested.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.12
• /
• pp.135-142
• /
• 1997

New approach to determine thd design of automotive tire profile was introduced. In this study, design technology for tire profile was combined with a finite element method to improve high speed durability. Static and dynamic behavior analysis of new concept tire was compared with conventional tire profile. To obtain the improved tire performance, appropriate design values, ie. design methodology, section profile selection, material properties, are needed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.63-68
• /
• 2017

This study determines the selection of an appropriate jig material for the blade edge of the medical sapphire knife. The physical properties of the jig material affects the edge shape and chipping phenomenon in machining of the medical sapphire knife. If a grinding wheel is used, brittle workpieces such as sapphire are easily damaged by the propagation of cracks because the grinding force significantly increases. It is important to constantly maintain the grinding force in the grinding process of the brittle materials. The grinding force can be kept constantly by inducing the elastic deformation of the Jig material because the elastic deformation of brittle work-piece is negligibly low. The chipping phenomenon may be reduced by selecting the proper Jig material. Aluminum, copper, stainless steels and carbon steel were used as Jig materials. The experiment was conducted using a cast iron grinding wheel, which was installed on a conventional grinding machine with the ELID grinding system. The thickness and width of the chipping area were measured using an optical microscope and FE-SEM to analyze the shape of the blade edge. According to the experiment result, the chipping phenomenon decreased, and the sharp edge was formed when the jig materials with low elastic modulus were used.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.163-174
• /
• 2018

Consumer and property evaluation of wetsuit materials were conducted to obtain useful data for developing competitive products that meet consumer expectations and improving industrial competitiveness. Data were collected through online surveys of 213 domestic consumers who have experienced wearing wetsuit among marine leisure activities. Five types of commercial wet suit materials by brand and four types of commercial wet suit materials with the same quality by thickness were collected. Then, their physical properties, salt water resistance and thermal insulation rate were evaluated and compared. As a result, the most commonly used wetsuit material is 3 to 5 mm thick, and the basic jersey material is bonded on both sides. As a processing for imparting functionality, processing for improving warmth and reducing surface resistance are most frequently used. Consumers often feel uncomfortable when wearing a wetsuit, such as wearing comfort, weight, ease of movement, stretchability, and clothing pressure, which are different from those of casual wear. Also, mechanical strength and warmth were considered to be the most important criteria for selection of wetsuit material for purchase or rental. The mechanical properties of brand A and B were better than those of brand C, D, and E. Resilience and thermal shrinkage were better in brand C, D, and E. On the other hand, there was no significant difference in the physical properties due to the difference in thickness of the material at the same quality. Also, it was found that the thicker the material, the more stable it is in the heat. Brand A and B had superior salt water resistance than brand C, D, and E. In the thermal insulation test, brand A and B showed better insulation characteristics than brand C, D, and E, but the types of bonded fabric and surface finishing of materials were thought to have affected. In comparison of the thickness, the thicker the materials, the better the salt resistance and the thermal insulation.

• Fashion & Textile Research Journal
• /
• v.25 no.4
• /
• pp.497-507
• /
• 2023

This study measured the effect 3D printing products comprised of different materials and shapes on heat transfer in clothing to derive fundamental data on thermal comfort among clothing comfort. The variables were three types of material (EVA foam, TPU-10%, TPU-10%+EVA), two types of shape (without holes, with holes), and two types of covers(without cover, with cover). All samples (12 types) prepared by combining these variables were placed on the hot plate set at 36℃, and the surface temperature was measured at three points for 10 minutes. The surface temperature change was dependent on the material, shape, and cover of the sample. The sample printed with TPU exhibited higher temperature transfer compared to the EVA foam sample after 10 mins. In addition, the temperature transfer was better when there were holes, and rate decreased when the sample was covered with fabric. We confirmed that material selection of the pad and thermal conductivity of the cover are extremely important in solving thermal stress to the human body caused by functional clothing with protectors. Additionally, as the protector, it is recommended to design the outer shell with a passage, such as a hole, to allow the rapid transfer of heat to the external environment.

• Archives of design research
• /
• v.12 no.2
• /
• pp.157-168
• /
• 1999

Stone in the Cho Sun Dynasty has been used as the material of industry arts, widely building materials and an important material for the artistic design. But it has been generally used as an use of practical living Product like, suban, a metal printing type, a fire place, a pillowcase, a pencil case, etc, and ornament with the quality of stone material and the aesthetic view. There are several problems as like size, quantity, delivery and processing method with the stne material according to its variety and selection. Accordingly it has been studied through the whole process of shape, a material selection of design and processing method as well as studying about small stone crafts which were manufactured in the Cho Sun Dynasty, considering these problems. Stone crafts in Cho Sun Dynasty has been widely used as a living tool. There was some what difference on manufacturing purpose on its technique of folk crafts of stone crafts, but, through the research of collected crafts, they were almost the same that social need, user's taste and hobby in those days were reflected in. In the result of analysis as dividing the stone crafts into daily living product, stationery and tool, the major of daily products have been manufactured with emphasis of practicability. And they have been manufactured from agalmatolite for the propose of use. further, kitchen product had no design due to the function and living products which has been used in the main living room has been carved with the decorative expression of the various form by using intaglic, relieve, inlaid technique, etc. For the stationery, it has been characterized with aesthetic point considering the decorative effects & selection of material in accordance with use. A material for manufacturing has been used in the range of agalmtolite, atopaz, a sapphire, white stone etc. As the result of this research, It was noticeable that there was the spleudidness on the expression of design and carving. It was also noticeable that black stone and guanite have been widely esed because it didn't need the delicacy as a tool.