• Journal of the Korean Society for Precision Engineering
• /
• 제28권11호
• /
• pp.1234-1241
• /
• 2011

In this work the potential, and the perspectives of the dielectric elastomer actuator are overviewed briefly. As an exemplary work, we introduce a novel contractile artificial muscle actuator based on Synthetic Elastomer(SE). SE is the name of new dielectric elastomer material we have developed and its synthesis procedures and evaluations are described in the first. The contractile artificial muscle actuator is made by stacking the actuator unit one by one along the in thickness direction and finished up by bonding the multi-stacked actuator. Its possibility for the robotic actuator is discussed and demonstrated via experiments.

• Steel and Composite Structures
• /
• 제11권5호
• /
• pp.375-390
• /
• 2011

Composite beam, which combined the material characteristic of the steel and concrete, has been widely used in the construction of various building and bridge system. For the effective application of the composite beam, the composite action on the composite interface between the concrete element and the steel element should be achieved by shear connectors. The behavioral characteristics of composite beam are related with the degree of interaction and the degree of shear connection according to the shear strength and shear stiffness of the stud shear connectors. These two concepts are also affected by the number of installed shear connector and the strength of composite materials. In this study, experimental and analytical evaluations of the degree of shear connection affected by stud diameter were conducted, and the relationship between structural behavior and the degree of shear connection was verified. The very small difference among the ultimate loads of the specimens depending on the change of the degree of connection was possibly because of the dependence of the ultimate load on the characteristic of plastic moment of the composite beam.

• Steel and Composite Structures
• /
• 제23권3호
• /
• pp.303-315
• /
• 2017

This paper describes the finite element model for predicting the fundamental performance of embedded steel column base connections under monotonic and cyclic loading. Geometric and material nonlinearities were included in the proposed finite element model. Bauschinger and pinching effects were considered in the simulation of embedded column base connections under cyclic loading. The degradation of steel yield strength and accumulation of plastic damage can be well simulated. The accuracy of the finite element model is examined by comparing the predicted results with independent experimental dataset. It is demonstrated that the finite element model accurately predicts the behaviour and failure models of the embedded steel column base connections. The finite element model is extended to carry out evaluations and parametric studies. The investigated parameters include column embedded length, concrete strength, axial load and base plate thickness. Moreover, analytical models for predicting the initial stiffness and bending moment strength of the embedded column base connection were developed. The comparison between results from analytical models and those from experiments and finite element analysis proved the developed analytical model was accurate and conservative for design purposes.

• Journal of the Society of Naval Architects of Korea
• /
• 제43권4호
• /
• pp.494-503
• /
• 2006

Inherent damage zone model is presented to explain the fatigue properties near the fatigue limit and the crack growth threshold consistently Inherent damage zone model assumes that the stress at a point which is located at a small distance, $r_0$, an inherent length of the material that represents the size of effective damage zone, from the crack initiation position governs the fatigue characteristics regardless of the geometric configuration of the specimen; smooth specimen, notched specimen or cracked specimens with short and long crack length. A special feature of the paper is using the exact stress distributions of notched and cracked specimens at the strength evaluations. Analytical elastic solutions by Neuber and Westergaard are employed for this purpose Relationship between fatigue limit of smooth specimen and threshold stress of cracked specimen, occurrence condition of non-propagating crack at the root of elliptic notch and circular hole and relationship between stress concentration factor and fatigue notch factor are discussed quantitatively based on the proposed model.

• Transactions on Electrical and Electronic Materials
• /
• 제15권3호
• /
• pp.170-173
• /
• 2014

In order to assess the impact of proprioceptive exercises on the position sense ability of the knee joint, we conducted an analysis using Biodex System $3pro^{(R)}$, targeting 42 ordinary people (male=22, female=20). After applying proprioceptive exercise, we measured changes in balance and flexibility, and active articular position sense (AAPS), depending on gender. To find out the change in each measurement item variable, we carried out dependent t-tests. The statistical significance level was set to 0.05. The research showed that after applying the proprioceptive exercise, AAPS was significantly improved for both men and women (p<.01). In the case of women, the flexibility was significantly improved (p<.01). Also, the balance was significantly improved for both men and women (p<.01). Therefore, the proprioceptive exercise program is considered to be very useful in improving muscle and joint function, and preventing injuries. Thus, continuous clinical studies using Biodex system $3pro^{(R)}$ are required for a variety of scientific evaluations of proprioceptive skills.

• Aerospace Engineering and Technology
• /
• 제11권1호
• /
• pp.91-97
• /
• 2012

The structural analyses and experimental results for the bellows of a gas-generator liquid oxygen shut-off valve were presented. The bellows experiences axial compression and external high pressure loadings at cryogenic temperatures. The analyses were performed using EJMA (Expansion Joint Manufacturing Association) standard and the commercial FE (finite element) analysis program, Abaqus v6.9, at room and cryogenic temperatures. The spring modulus, the induced stress and the expected fatigue life of the bellows were compared respectively. The effects by the contact and the material plasticity on the FE analysis results were also analyzed. Also, FE analyses related to a burst test were presented.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제2권3호
• /
• pp.155-164
• /
• 2004

Advanced spent fuel Conditioning Process(ACP) project which is under development for efficient spent fuel management has finished process feasibility study and is preparing $\alpha$-${\gamma}$ type hot cell construction for process experimentation. Radiation dose evaluation for the radioactive nuclides were preliminarily performed for normal operation and accident case with the basic concept design report, the meteorological data and the recent site specific data. According to the production and release rate of nuclides, dose evaluations for residents around facility were performed. The evaluation result shows a safe margin for regulation limits and SAR(Safety Analysis Report) limit of IMEF(Irradiated Material Examination Facility) where this facility will be constructed.

• Journal of the Korean Wood Science and Technology
• /
• 제26권3호
• /
• pp.48-52
• /
• 1998

Residues such as walnut, pinenut and peanut shells were used as a filler in adhesive for bonding radiata pine plywood. The nutshell residues were prepared by simply drying to 8% moisture content and grinding the dry material using a laboratory Wiley mill with a $75{\mu}m$ (200 mesh) screen. The nutshells residues were compared to a commercial filler commonly used in adhesives by the structural plywood and laminated veneer lumber industry in the United States. The adhesive mixes were made by following the recommended procedure of Georgia-Pacific Resins, Inc., using phenol-formaldehyde resin. For each filler type, three-ply plywoods, 6 mm nominal thickness and 30 by 30 cm in size, were fabricated at two press times (4 and 5 min) and around 30 minute assembly time. Evaluations of the nutshell residues were carried out by tension shear tests after cyclic boil tests on plywood. The results of the performance test included tension shear strength and wood failure. All plywoods made with the nutshell fillers were comparable to those made with the control filler. These results indicate that nutshell residues would be suitable as filler for plywood adhesives.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제47권
• /
• pp.124-134
• /
• 2002

The sweetpotato, Ipomoea batatas L. (Lam.), is one of the important summer upland crops in Korea and has been used as human food, industrial yaw material and vegetable. Sweetpotato has been consumed for human foods such as boiled, roasted, fried or salad etc. It should be developed for higher quality as a snack or health food, primarily through improving the eating and marketing qualities as well as nutritional value. Its quality after cooking or processing is a complex one combining the aroma, taste, texture and fiber content. The other important qualities for consumers are root shape, size, skin color, flesh color, insect and disease resistance, nutritional components and safety from phytoalexins(toxic stress metabolites) etc. Korean people generally prefer to red skin color, round or elliptic shape and dry texture, yellow flesh color of sweetpotato which is high in starch content including vitamins and nutrients. The almost factors of quality components of sweetpotato are genetically controlled by breeder, but postharvest handlings and marketing management for making high quality goods should be done thoroughly according to the quality evaluation criteria of sweetpotato from the moment of harvest until shipping them to the market by farmers and the other users. This paper describes current status and prospects of the quality evaluations and researches in sweetpotato roots in Korea.

• Journal of Korean Institute of Industrial Engineers
• /
• 제29권3호
• /
• pp.197-205
• /
• 2003

Many people get plenty of information from World Wide Web, and the study of the factors that affect on reading task on web browser is presenting important issue. But domestic studies on legibility of Korean on web environment were relatively poor and the study about suitable text layout for skimming wasn't carried out also. At this point, this study was performed to investigate the effects of two types of reading, three levels of line length, and three levels of interlinear spacing on comprehension and reading rate when subjects read the materials on web browser. Reading speed, error rate, subjective preference and SACL(Stress and Arousal Checklist) evaluation were measured to evaluate the effects. Eighteen volunteer subjects participated in eighteen web document sessions with two different reading types, three different line lengths, and three different interlinear spacings. Statistical results from objective and subjective evaluations indicate that 50 characters per line of line length and 100 percents of interlinear spacing improved reading rate, overall error rates were reduced when reading normally, and SACL measures were increased at fast reading type. Consequently, in order to design text layout to retrieve information in WWW environment effectively, just applying guidelines of traditional printed material is not proper. Therefore, it is effective to consider reading type, line length, and interlinear spacing. Implications of these results and suggestions for the further study are also addressed.