• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.383-386
• /
• 1998

An application determination of the dominant-mode fields in ridge waveguides at all frequencies has been made. Evaluations of the fields along the walls of a commercially standard single-ridge guide having a usable frequency range from 3.75 to 15.0 Gc, This paper presented the analysis of the mode directive coupling characteristics of two ridge waveguide using mode matching techniques for TE10 mode.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.432-435
• /
• 2007

In this paper, a dual band microstrip patch Antenna is designed for RFID Application. The antenna shows a good performance at the frequencies, 900MHz and 2.45GHz for the radiation characteristics and input impedance matching, as well. The reflection factor is lower than -25dB and a good directivity higher than 5dB is achieved for both frequency.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.319.2-322
• /
• 1998

본 논문에서는 반음절 단위 HMM을 이용한 연속 숫자 음성인식 시스템의 2단계로 이루어지는 화자 적응 알고리즘을 수행하였다. 음성인식 시스템에서 사용되는 훈련데이터의 양이 많더라도 발성속도, 발성크기 등의 화자 발성 습관에 따라 화자독립 음성인식 시스템에서는 많은 문제점들이 발생하게 된다. 불특정 화자를 대상으로 한 음성 인식에 있어서 개인차에 의한 변동을 대처하는 방법으로 유효한 음향적 특성을 추출하기 위해 스펙트럼의 동적인(Dynamic) 특성을 주로 이용하고 있다. 따라서 본 논문에서는 화자 적을 기법의 하나인 frequency warped spectral matching 방법을 연속숫자 음성 인식시스템에 적용하였으며, 이때 인식에 의한 적절한 화자별 스케일링 계수 선정 방법을 수행하여 오인식률이 감소함을 확인하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1721-1727
• /
• 1989

Carbon-ferrite microwave absorbers were designed experimentally and fabricated trialy, as a result of which the relative frequency bandwith of 7.3 to 8.2% were obtained under the tolerance limits of the reflection coefficients lower than -20 dB, and the matching thickness becomes 1.4 to 1.6mm, which is significantly thinner than that of the conventional ones. Furthermore, attenuation has been founded by measuring the material constants of the microwave absorbers for microwave oven and the results are compared and discussed.

• Journal of Magnetics
• /
• v.3 no.2
• /
• pp.64-67
• /
• 1998

Microwave absorbing properties of ferrite-epoxy composite (absorbing layer) attached on the carbon fiber polymer composite (reflective substrate) are analyzed on the basis of wave propagation theory. A modified equation for wave-impedance-matching at the front surface of absorbing layer including the effect of electrical properties of the quasi-conducting substrate is proposed. Based on this analysis, the frequency and layer dimension that produce zero-reflection can be estimated from the intrinsic material properties of the obsorbing layer and the substrate. It is demonstrated that the microwave reflectivity of carbon fiber composite has a strong influence on the microwave absorbance of front magnetic layer.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.135-138
• /
• 1999

In this paper, we designed each matching networks by given input and output impedances of power amplifiers. Mearsured results for IMD and gain flatness are -30㏈c and $\pm$0.2㏈ with 38㏈m output power PEP of PTE10119 at 2.10-2.20㎓ and are -30㏈c and $\pm$0.4㏈ with 42㏈m output power PEP of MRF284 at same frequency range.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.11a
• /
• pp.221-233
• /
• 1997

무선통신 분야에서 다량의 정보전송과 CDMA, PCS 등의 상업화에 의해 광대역 고출력 증폭기의 요구가 증가하고 있다. 제품화된 파워 모듈에 비해 트랜지스터로 구성한 전력증폭기는 비용의 감소와 효율증대, 생산성 향상의 이점이 있다. 3단의 증폭기를 사용하여 VHF(148∼174㎒),UHF(440㎒∼470㎒)대역에서 5W이상의 전력과 45%이상의 효율을 얻었으며, 적정한 바이어스회로와 임피던스 정합회로망을 설계하여 제작, 실험함으로서 기존의 파워 모듈과 동일한 크기, 성능을 나타냈으며, 발진, 방열, 하모닉제거등 전력증폭기에서 요구하는 사항을 만족하였다. 또한 UHF트랜지스터를 사용하여 VHF의 증폭기를 임피던스 매칭을 이용하여 설계할 수 있음을 실험에 의하여 입증하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1850-1851
• /
• 1998

Using the "MAGIC" code, computer simulation is performed to design a cathode structure which provides a radial distribution of electron beam density matching the field distribution of the $TM_{05}$ mode. Thus, very narrow band $TM_{05}$ mode microwave radiation can be generated in an open end waveguide. The simulation results show that the vircator can indeed be operated at the selected frequency 10.2GHz with a very narrow bandwidth(${\Delta}{\omega}/{\omega}$ < 1%).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.9
• /
• pp.1344-1350
• /
• 1990

A design method of ultra-broadband microwave amplifier is presented. A lossy network is represented as the combination of a serial impedance component and a parallel admittance component, and the realizable ranges of the gain and the reflection coefficients are derived with the components connected to the input, output or interstage network. The matching network has been designed by using the serial and parallel immittance loci which have the constant gain or reflection coefficients within the realizable ranges. Using the proposed method, deisgn examples of ultra-broadband amplifiers operating from dc to 12GHz frequency range are presented.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.383-385
• /
• 2006

A new meander-line antenna consisting of two open-ended strips is proposed for a compact and broadband UHF radio frequency identification tag. An equivalent circuit model for the proposed antenna is derived and used to perform a simple and wideband impedance match to an arbitrary complex impedance of a tag chip without any additional matching network. The performance of the proposed antenna is validated by comparing calculated and measured results, which show good agreement.