• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.876-882
• /
• 2006

This study presents an ultrasonic location awareness system for the ubiquitous computing with absolute position. The flight time of ultrasonic waves is determined by a period detecting technique which is able to extend the sensing range compared with traditional methods. For location awareness, ultrasonic waves are sent successively from each ultrasonic transmitter and synchronized by radio frequency (RF) signal, where the transmitting part is fixed and the receiving part is movable. To expand the recognizing range, cell matching technique and coded ultrasonic technique are introduced. The experimentation for various distances is accomplished to verify the used period detecting technique of U-SAT system. The positioning accuracy by using cell matching is also verified by finding the locations of settled points and the usability of coded ultrasonic technique is verified. As a result, the possibility of ultrasonic location awareness system for the ubiquitous computing can be discussed as a pseudo-satellite system with low cost, a high update rate, and relatively high precision, in the places where CPS is not available.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1870-1872
• /
• 2005

In this study, an ultrasonic level limit sensor with a new structure utilizing the acoustic impedance matching is proposed to be able to check it out a change of water-level. 2 PZT resonators with the same property are bonded directly on the polyethylene plate. One resonator is for transmitter as an ultrasonic transducer, the other one is for receiver. In this case, a polyethylene plate will operate as an acoustic guider to transmit a transverse wave between 2 PZT resonators in air. While in the water, a polyethylene plate having a similar acoustic impedance with the water will be emitted an acoustic energy into the water as a longitudinal wave. According to this mechanism, there was a wide difference of acoustic signal output between underwater and in air. As a summary, this proposed level limit sensor could be used as a strong candidate with low cost and more stable one.

• Journal of Korea Multimedia Society
• /
• v.21 no.12
• /
• pp.1431-1438
• /
• 2018

In this paper, we proposed a river water level detection and tracking of the river or dams based on image processing system. In past, most of the water level detection system used various water sensors. Those water sensors works perfectly but have many drawbacks such as high cost and harsh weather. Water level monitoring system helps in forecasting early river disasters and maintenance of the water body area. However, the early river disaster warning system introduces many conflicting requirements. Surveillance camera based water level detection system depends on either the area of interest from the water body or on optical flow algorithm. This proposed system is focused on water scaling area of a river or dam to detect water level. After the detection of scale area from water body, the proposed algorithm will immediately focus on the digits available on that area. Using the numbers on the scale, water level of the river is predicted. This proposed system is successfully tested on different water bodies to detect the water level area and predicted the water level.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.144-145
• /
• 2020

본 논문에서는 정밀한 3차원 복원 및 시점 합성을 위해 매칭 비용을 반복적으로 업데이트하는 Generalized Soft 3D Reconstruction (GenSoft3D) 알고리즘을 제안한다. 먼저 다시점 영상들과 카메라 자세정보가 주어지면 GenSoft3D는 볼륨 기반의 다시점 스테레오 매칭 알고리즘으로 시점별 초기 매칭 비용 볼륨 및 시차 맵을 계산한다. 그 후 정제 과정에서 각 시점은 모든 시차 맵을 이용하여 표면 확률 및 가시 확률을 계산한다. 표면 확률은 초기 매칭 비용 업데이트에 사용하며, 가시 확률은 폐색 영역의 정확한 시차를 계산하기 위해 사용된다. 해당 정제 과정을 일정 횟수 반복할 경우 시점별 고정밀의 시차 맵 획득이 가능하다. 또한 시차 맵의 정확도가 향상됨에 따라 정확한 시점 합성이 가능하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2169-2177
• /
• 2015

This paper proposes a new pattern matching module to overcome the increased runtime of previous algorithm using RAM, which was designed to overcome cost limitation of hash-based algorithm using CAM (Content Addressable Memory). By adopting Merge FSM algorithm to reduce the number of state, the proposed module contains state block and entry block to use in RAM. In the proposed module, one input string is compared with multiple entry strings simultaneously using entry block. The effectiveness of the proposed pattern matching unit is verified by executing Snort 2.9 rule set. Experimental results show that the number of memory reads has decreased by 15.8%, throughput has increased by 47.1%, while memory usage has increased by 2.6%, when compared to previous methods.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.837-845
• /
• 2016

Providing a customer with tailored location-based services (LBSs) is a fundamental problem. For location-estimation techniques with radio-based measurements, LBS applications are widely available for mobile devices (MDs), such as smartphones, enabling users to run multi-task applications. LBS information not only enables obtaining the current location of an MD but also provides real-time push-pull communication service. For indoor environments, localization technologies based on radio frequency (RF) pattern-matching approaches are accurate and commonly used. However, to survey radio information for pattern-matching approaches, a considerable amount of time and work is spent in indoor environments. Consequently, in order to reduce the system-deployment cost and computing complexity, this article proposes an indoor positioning approach, which involves using Asus Xtion to facilitate capturing RF signals during an offline site survey. The depth information obtained using Asus Xtion is utilized to estimate the locations and predict the received signal strength (RF information) at uncertain locations. The proposed approach effectively reduces not only the time and work costs but also the computing complexity involved in determining the orientation and RF during the online positioning phase by estimating the user's location by using a smartphone. The experimental results demonstrated that more than 78% of time was saved, and the number of samples acquired using the proposed method during the offline phase was twice as much as that acquired using the conventional method. For the online phase, the location estimates have error distances of less than 2.67 m. Therefore, the proposed approach is beneficial for use in various LBS applications.

• Journal of KIISE:Databases
• /
• v.34 no.6
• /
• pp.518-527
• /
• 2007

It is an important issue to find out the difference between RDF documents, because RDF documents are changed frequently. When RDF documents contain blank nodes, we need a matching technique for blank nodes in the change detection. Blank nodes have a nested form and they are used in most RDF documents. A RDF document can be modeled as a graph and it will contain many subtrees. We can consider a change detection problem as a minimum cost tree matching problem. In this paper, we propose a change detection technique for RDF documents using the labeling scheme for blank nodes. We also propose a method for improving the efficiency of general triple matching, which used predicate grouping and partitioning. In experiments, we showed that our approach was more accurate and faster than the previous approaches.

• Spatial Information Research
• /
• v.21 no.1
• /
• pp.87-100
• /
• 2013

Recently, the use of locational information is growing rapidly. GPS technology has been adopted generally for obtaining locational information in outdoor spaces. In the other hand, the researches on indoor positioning have been carried out applying WLAN, RFID or Bluetooth technology because of the multi-path interference of GPS signal caused by the physical obstacles such as walls or columns in buildings. However, such technologies for indoor positioning cost too much to build sensing infrastructure and compute-intensive processes are involved. Furthermore, the accuracy of location estimation is variable caused by interior structures in buildings. In this study, to make up for the limitations, descriptive data such as phone number, unique room numbers, or business names readily available in mixed-use buildings is used for extracting location information. Furthermore, during the process, a geocoding method using character matching is applied to this study enabling prompt location estimation and sublating the fluctuation of accuracy caused by interior structures. Based on the proposed method in this study, an architecture is designed, and three-dimensional viewer program is developed for the implementation of this study. Also, this research is quantitatively analyzed through match rate and processing time of proposed method.

• Journal of Internet Computing and Services
• /
• v.10 no.4
• /
• pp.25-33
• /
• 2009

In the paper, we proposed a new system to retrieve 3D wrinkle data based on stereo images. Usually, 3D reconstruction based on stereo images or video is very popular and it is the research focus, which has been applied for culture heritage, building and other scene. The target is object measurement, the scene depth calculation and 3D data obtained. There are several challenges in our research. First, it is hard to take the full information wrinkle images by cameras because of light influence, skin with non-rigid object and camera performance. We design a particular computer vision system to take winkle images with a long length camera lens. Second, it is difficult to get the dense stereo data because of the hard skin texture image segmentation and corner detection. We focus on semi-dense stereo matching algorithm for the wrinkle depth. Compared with the 3D scanner, our system is much cheaper and compared with the physical modeling based method, our system is more flexible with high performance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.667-675
• /
• 2011

In this paper, we propose an automatic image-to-image registration between high resolution multi-sensor images. To do this, TerraSAR-X image was shifted according to the initial translation differences of the x and y directions between images estimated using Mutual Information method. After that, the Canny edge operator was applied to both images to extract linear features. These features were used to design a cost function that finds matching points based on the similarities of their locations and gradient orientations. For extracting large number of evenly distributed matching points, only one point within each regular grid constructed throughout the image was extracted to the final matching point pair. The model, which combined the piecewise linear function with the global affine transformation, was applied to increase the accuracy of the geometric correction, and the proposed method showed RMSE lower than 5m in all study sites.