• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.445-446
• /
• 2012

Recently the interest in wireless power transfer have been studied. ECR (Electromagnetic Coupled Resonance) device, depending on the size of the frequency characteristics of the structure, increasing in volume and larger volume of wireless power transmission device to make use of ECR is a big barrier. So to solve this problem for ECR device miniaturization and high efficiency has been actively studied. In this paper, the size of the device for ECR IM (Impedance Matching) by applying a one-turn coil circuit, remove the device in the form of ECR Network Analyzer measured by removing the one-turn coil has demonstrated the possibility of the device in the form of ECR.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.143-152
• /
• 2012

It is well-known that image matching is necessary for automatic generation of 3D data such as digital surface data from aerial images. Recently developed aerial digital cameras allow to capture multi-strip images with higher overlaps and less occluded areas than conventional analogue cameras and that much of researches on multi-image matching have been performed, particularly effective methods of measuring a similarity among multi-images using point features as well as linear features. This research aims to investigate similarity measuring methods such as SSD and SNCC incorporated into a area based multi-image matching method based on vertical line locus. In doing this, different similarity measuring entities such as grey value, grey value gradient, and average of grey value and its gradient are implemented and analyzed. Further, both dynamic and pre-fixed adaptive-window size are tested and analyzed in their behaviors in measuring similarity among multi-images. The aerial images used in the experiments were taken by a DMC aerial frame camera in three strips. The over-lap and side-lap are about 80% and 60%, respectively. In the experiment, it was found that the SNCC as similarity measuring method, the average of grey value and its gradient as similarity measuring entity, and dynamic adaptive-window size can be best fit to measuring area-based similarity in area based multi-image matching method based on vertical line locus.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.451-456
• /
• 2018

UAVs (Unmanned Aerial Vehicles) are widely used for maintenance and monitoring of facilities. It is necessary to acquire a high-resolution image for evaluating the appearance state of the facility in safety inspection. In addition, it is essential to acquire the video data in order to acquire data over a wide area rapidly. In general, since video data does not include position information, it is difficult to analyze the actual size of the inspection object quantitatively. In this study, we evaluated the utilization of 3D point cloud data of bridges using a matching between video frames and reference photos. The drones were used to acquire video and photographs. And exterior orientations of the video frames were generated through feature point matching with reference photos. Experimental results showed that the accuracy of the video frame data is similar to that of the reference photos. Furthermore, the point cloud data generated by using video frames represented the shape and size of bridges with usable accuracy. If the stability of the product is verified through the matching test of various conditions in the future, it is expected that the video-based facility modeling and inspection will be effectively conducted.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.434-442
• /
• 2006

This paper proposes a color-matching 3D look-up table that simplifies the complex color-matching procedure between a monitor and a mobile display device, where the image colors are processed in a device-independent color space, such as CIEXYZ or CIELAB, and gamut mapping performed to compensate the gamut difference. The transform from a device-dependent RGB color space to a device-independent color space is implemented by performing display characterization. The mobile LCD characterization error using the S-curve model is larger than the tolerance error since the mobile LCD has the channel-chromaticity-inconstancy and channel-dependence characteristics. In this paper we reduced the characterization error using the electro-optical transfer functions of X, Y, and Z value for R, G, B, C, M, Y, K components. Experimental results demonstrated that 64 ($4{\times}4{\times}4$) was the smallest size of color-matching look-up table that could produce an image with an acceptable reproduction error, based on a comparison of color-matched images resulting from the proposed color-matching look-up table and complex step-by-step color-matching procedures.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.339-345
• /
• 2016

This paper presents a two-stage power amplifier MMIC using a $0.4{\mu}m$ GaN-HEMT process. The two-stage structure provides high gain and compact circuit size using an integrated inter-stage matching network. The size and loss of the inter-stage matching network can be reduced by including bond wires as part of the matching network. The two-stage power amplifier MMIC was fabricated with a chip size of $2.0{\times}1.9mm^2$ and was mounted on a $4{\times}4$ QFN carrier for evaluation. Using a downlink LTE signal with a PAPR of 6.5 dB and a channel bandwidth of 10 MHz for the 2.6 GHz band, the power amplifier MMIC exhibited a gain of 30 dB, a drain efficiency of 32%, and an ACLR of -31.4 dBc at an average output power of 36 dBm. Using two power amplifier MMICs for the carrier and peaking amplifiers, a Doherty power amplifier was designed and implemented. At a 6 dB back-off output power level of 39 dBm, a gain of 24.7 dB and a drain efficiency of 43.5% were achieved.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.556-565
• /
• 2009

Automated visual grading system of lumber needs correct input image. In order to create a correct image of domestic red pine lumber 3.6 m long feeding on a conveyer, part images were captured using area sensor and template matching algorithm was applied to merge part images. Two kinds of template matching algorithms and six kinds of template sizes were adopted in this operation. Feature extracted method appeared to have more excellent image merging performance than fixed template method. Error length was attributed to a decline of similarity related by difference of partial brightness on a part image, specific pattern and template size. The mismatch part was repetitively generated at the long grain. The best size of template for image merging was $100{\times}100$ pixels. In a further study, assignment of exact template size, preprocessing of image merging for reduction of brightness difference will be needed to improve image merging.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.210-213
• /
• 2000

In the closed range space, the parallel two CCD cameras are used to acquire a pair of stereo image. The acquired stereo image are computed with Wavelet Transform repeatedly and including the low frequency component, the image size of those are reduced. It is the pyramid structure. The optimum matching point is searched to the pixel. Then appling the optimum matching point to DLT, it extract the three - dimensional surface coordinate from a stereo image. The direct linear transformation(DLT) method is used to calibrate the stereo camera compute the coordinate on a three dimensional space. To find the parameters for the DLT method, 30 control points which marked on the cylinder type object are used. To improve the matching algorithm, the paper select the pyramid structure for Wavelet Transform. The acquired disparity information is used to represent the really three-dimensional surface coordinate.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.40
• /
• pp.81-90
• /
• 1996

It is one of the most important thing to select pneumatic components in pneumatic system design. For the purpose of selecting pneumatic components, case objects are described as a knowledge representation and the most similar case object must be selected by decision making in computer. In this paper, case objects are represented using the methodology that is used for CBR(Case Base Reasoning) and methodology that the most similar case can be selected is Proposed. Algorithm VIWNNR(Varying Index Weight-based Nearer Neighbor Retrieval) is accomplished by varying index weight, that is not considering a index matching as true or false but varying a size of weight according to the degree of matching and enhance the flexibility of SCRM(Similar Case Retrieval Module) involving fuzzy concept in matching the cases. SCRM is tested In verify the feasibility to select pneumatic linear components and is peformed effectively.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.551-555
• /
• 2011

The Crab label tag with a loop matching feed and a modified dipole antenna structure was proposed. The antenna impedance is conjugated easily to a radio frequency identification IC chip impedance by a loop matching feed. The reading range of the crab structure tag is 0.9-1.0 m from the upper side of the formula milk can lid. The fabricated label tag size is $44.0{\times}44.0mm^2$. The operating frequency at -3 dB return loss is 861.0-929.0 MHz, and the maximum reading range at the anechoic chamber is 1.5 m.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.138-146
• /
• 2003

A critical issue in area-based stereo matching lies in selecting a fixed rectangular window size. Previous stereo methods doesn't deal effectively with occluding boundary due to inevitable window-based problems, and so give inaccurate and noisy matching results in areas with steep disparity variations. In this paper, a variable window approach is presented to estimate accurate, detailed and smooth disparities for three-dimensional structure reconstruction. It makes the smoothing of depth discontinuity reduced by evaluating corresponding correlation values and intensity gradient-based similarity in the three-dimensional disparity space. In addition, it investigates maximum connected match candidate points and then devise the novel arbitrarily shaped variable window representative of a same disparity to treat with disparity variations of various structure shapes. We demonstrate the performance of the proposed variable window method with synthetic images, and show how our results improve on those of closely related techniques for accuracy, robustness, matching density and computing speed.