• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.11-15
• /
• 2002

3 V, 2.46GHz Low Noise Amplifier (LNA) have been designed for standard 0.35$\mu\textrm{m}$ CMOS process with one poly and four metal layers. This design includes on-chip biasing, matching network and multilayer spiral inductors. The single-ended amplifier provides a forward gain of 20.5dB with a noise figure 3.35dB, and an IIP3 of -6dBm while drawing 59mW total Power consumption

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.290-292
• /
• 2002

In this paper, we present a simple design method and measurement results for circular loop antenna arrays, which can be used for LS band operation, such as access point antennas in the wireless LAN system. It has been shown that the input impedance of a circular loop can be adjusted near 100 $\Omega$ using a short stub. The length of the stub can be immediately determined in the work place through the measurement of S11 with a network analyzer. Fabricated arrays show high antenna gains as much as 12.4㏈i and 15.1 ㏈i at the center frequency of 2.45 ㎓ for 4${\times}$l and 4${\times}$2 array, respectively. These types of loop arrays can be fabricated at a low cost.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2048-2051
• /
• 2003

MPEG-2로 부호화된 비트열은 가변길이 부호화(variable length coding)방식을 사용하기 때문에 에러에 매우 민감하다. 망(network)을 통해 발생된 에러는 시간적, 공간적으로 전파되는 현상이 발생하기 때문에 고품질의 영상을 추구하는 MPEG-2 에서는 심각한 화질열화를 일으키게 한다. 이에 따른 에러 정정 및 은닉 기법이 MPEG-2 복호기 측에서 연구되어야 하는데, 기존의 제안된 에러은닉 기법들은 셀손실이나 비트에러를 기반으로 매크로 블록 주위의 데이터를 이용하였으나 MPEG-2 비트열의 구조상 슬라이스 단위에러에 대한 발생빈도가 더 자주 일어나고 에러에 대한 영향도 심각하다. 본 논문에서는 기존에 나와있는 에러은닉 기법과 달리 슬라이스 단위 에러발생 시 BMA(boundaruy matching algorithm)방식과 중간 값(median), 평균값(average)방식으로 구현한 에러은닉 기법을 통해 주관적 화질측면이나 수치적인 PSNR 실험 데이터로 좀 더 향상된 성능을 나타낼 수 있었다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.239-242
• /
• 2001

본 논문에서는 self-bias 구조를 갖는 소 신호 증폭기에 대해 논의된다 주파수 영역은 ISM band (Industria1/Scientific/Medical band) 인 무선 랜 (WLL : Wireless Local Loop) 대역 5.8GHz 에서 설계하였다. 제시된 self-bias 구조는 단일 전원만을 사용한다는 장점을 가지고 있으며 입력 단에서 RFC (λ/4 전송선로)를 제거하고 매칭 회로에서 단락 스터브를 사용함으로 구조를 간단히 하였다. 이러한 bias조건에서 FET의 이득은 11dB이고 회로 설계 후 측정 결과는 입력 반사 손실 -16.455dB, 이득은 8.095dB이다. 이 소 신호 증폭기는 간단한 구조로 구현된 장점 뿐 만 아니라 무선 랜 분야에서도 충분히 응용 될 수 있으리라 기대된다.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.359-363
• /
• 2017

A slotted implantable patch antenna with microstrip feeding is proposed for industrial, scientific, and medical band applications. The result is verified by implanting the antenna in animal tissue. Further, by varying the ground width and introducing a defect into the ground structure, the antenna becomes applicable for worldwide interoperability for microwave access operations. A simulation is performed using Empire XCcel software. An Agilent vector network analyzer is used for analyzing the return loss performance. Simulated and measured results are compared. Antennas with and without defected ground structure both have key advantages including low profile, desirable return loss, good impedance matching and required bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.325-334
• /
• 1987

Microwave integrated circuit phase shifters have undergone remarkable development to satisfy the fast and precise phase control requirements for phased array antennas. It is shown how relection type phase shift circuits using PIN diode can be analyzed and implemented so as to derve design equations for any phase shift. The reflection properties are achieved by the use of an impedance transforming two-port network and the virtual matching impedance method. Experimental and theoretical performance of 2-bit hybrid phase shifter designed by this method are found to be in good agreement for each bit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1754-1757
• /
• 2001

In this paper, a R-band hybrid amplifier with the coplanar waveguide(CPW) and the photonic bandgap(PBG) structure is designed and fabricated. The PBG and the CPW techniques are simultaneously employed in amplifier to improve the power added efficiency(PAE) and the IMD(Intermodulation Distortion) in R-band. In this paper, the PBG structures are optimized to obtain matching network. The output impedance of amplifier and the input impedance of PBG are matched to minimize the return loss. The PAE and the IMD were improved 15% and 4.5dB compared with the conventional amplifier, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.414-419
• /
• 1994

In recent years, there has been an increasing intest in control of active automotive suspension systems with a goal of improving the ride comfort and safety. Many approaches for these purposes have used linearized models of the suspension's dynamics, allowing the use of linear control theory. However, the linearized model does not well descriibe the actual system behavior which is inherently nonlinear. The object of this study is to develop a neuro controlled active suspension for the ride quality improvement. After obtaining active control law using optimal control theory, we use the artificial neural network to train the neuro controller to learn the relation of road input and control force. Form the numerical results, we found that back propagation learning does show good pattern matching and vertical acceleration of the driver's seat and sprung mass.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5674-5691
• /
• 2016

Fast IDentity Online(FIDO) supports biometric authentications in an online environment without transmitting biometric templates over the network. For a given FIDO client, the "Fuzzy Vault" securely stores biometric templates, houses additional biometric templates, and unlocks private keys via biometrics. The Fuzzy Vault has been extensively researched and some vulnerabilities have been discovered, such as brute force, correlation, and key inversions attacks. In this paper, we propose a simple fingerprint Fuzzy Vault for FIDO clients. By using the FIDO feature, a simple minutiae alignment, and point-to-point matching, our Fuzzy Vault provides a secure algorithm to combat a variety of attacks, such as brute force, correlation, and key inversions. Using a case study, we verified our Fuzzy Vault by using a publicly available fingerprint database. The results of our experiments show that the Genuine Acceptance Rate and the False Acceptance Rate range from 48.89% to 80% and from 0.02% to 0%, respectively. In addition, our Fuzzy Vault, compared to existing similar technologies, needed fewer attempts.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.249-252
• /
• 2001

본 논문에서는 실제 물체 윤곽을 검출하기 위해 물체 분할 과정에서 변이(disparity) 정보를 이용한다. 스테레오 정합(stereo matching)으로 획득한 변이도에서 불연 속한 부분은 물체의 경계나 변이가 할당되지 않는 폐색 영역 일부분에서 나타날 수 있으므로, 변이 변화가 작 은 영상의 각 영역은 같은 물체의 일부분이라는 것은 직관적으로 명백하다. 분할 과정은 이러한 변이 정보를 적절하게 이용하고 확산망(diffusion network)을 이용하여 선택적인 확산을 수행한다. 추정된 변이도는 변이 변화가 작은 영역을 인식하기 위해 사용되고 그러한 영 역은 단일 물체의 일부분이거나 배경(background)이라고 간주하고 텍스쳐(texture)에 의한 에지(edge)글 등방성 확산으로 제거하는 과정을 거친다. 나머지 영상 영역에서, 비등방성 확산으로 변이의 변화와 밝기차의 변화를 고려하여 수행된다.