• Korean journal of applied entomology
• /
• v.44 no.1 s.138
• /
• pp.61-65
• /
• 2005

Egg-forming and preservation methods for the indoor-rearing system of the emma field cricket, Teleogryllus emma, were investigated. The oviposition preference experiment on different mats, soil(natural oviposition mat) and $oasis^{\circledR}$(artificial oviposition mat), showed that T. emma preferred to oviposit on the $oasis^{\circledR}$. On the other hand, $oasis^{\circledR}$ had more inactive number of eggs laid per female and hatchability than another. However, the number of eggs laid per female and hatchability within 50 days after emergence were better than soil. The experiment on the hatching of the eggs showed that eggs could be stocked at $10^{\circ}C$ for 40 days with 14 day pre-period after laying, representing $62.1\%$ hatchability, when considering generation shortening. On the other hand, When it had been kept in cold storage for 90 days at $7.5^{\circ}C$ with 14 day pre-period after laying it, appeared to be the most suitable for long period-storage method by hatchability $65.1\%$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1876-1888
• /
• 1995

In this paper, glass surface-mat reinforced epoxy(G.S.R.E.) is developed, It is assured that the material(G.S.R.E.) can be used as photoelastic model material and it satisfy with the required properties of photoelastic model material. Therefore, the material can be used as model material of transparent photoelastic experiment when we analyze the stress distributions of transversely isotropic material by photoelastic experiment. When we use G.S.R.E. as photoelastic experiment model material, we had better use the G.S.R.E. which fiber volume ratio is less than 0.7% in the high temperature(stress freezing method) and than 1.74% in the room temperature. Relationships between stress fringe value and elastic modulus in transversely isotropic material are developed in this paper, it is assured by experiment that they are established in the room temperature or in the high temperature. Therefore we can obtain stress fringe value or elastic modulus from the relationships between stress fringe value and elastic modulus.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.53-63
• /
• 1988

Using COD-R curves, instability of crack growth in ductile material is studied here. Tearing modulus $T_{\delta}$, based on the COA concept is defined and the instability criterion $T_{{\delta}{\app}}$> $T_{{\delta}{\mat}}$ is compared with experiments. Variations of the COD-R curve and the location of rotation center are experimentally investigated as the initial crack ratio varies. Three-point bend specimens of alloy steel SCM4 are used here and two clip-on gauges are installed in order to obtain the COD-R curve. The results show that the tearing modulus $T_{\delta}$ is a good measure to characterize the instability of crack growth. Also it is found that the location of rotation center is almost constant regardless of the initial crack ratio and the amount of the crack growth.

• Journal of the Korean Society for information Management
• /
• v.5 no.1
• /
• pp.31-52
• /
• 1988

The information policy in Japan have bccir growing rapldlr 111 recent vttars. \'arioi~s level of govc~riimerital organrzatlons, ir~bt~tution arid agrircics have undt~rtak~~rr iriforrnatiori polrcy 111 order to i r l - crease information flow toward tlie society in Japan. At tlie same trme, computerized library systems also h a w uridergoirc rapid expansion. NACSIS(National Ceriter for- Science Informat~on System) wl~icl~ was cstablisl~ed bv Mirristr> of Etlr~c~arion, Sc~ence arid Culture haw witnessed dramatic adv;rnces i r i promoting for corrstructiori of database so as to provide their 11rf'3r.mat1orr nu nationwide scale. T l r i h articlr inrroduccs tlie actr\rtle> and ~mplcmeritat~o~~ of it format in^^ pol~cy wl~i(~li taktas a place hy goverrirnrlit of Japar~ aid arraly~c,.; thi~ ~ I . O I . P S I of deciiioii maltiiig iri polit~cal procedures. So far as b:ast-A\~ari riatioris art, ~ . n r i v t ~ r ~ ~ , e.;pc,ciall\. Kr,rc.an a~rd Japair !rave ,imilar cultural and liistorical backjir. ourii1, ard could t)t. tliif most a p p r o p r i a t ~ ~ caac stlldh for political ~nq~lerncritat~orr. Thus the topic of this artrclc will be useful to r t ~ a l l ~ t . Ore, trail ur~d c r r o r prorex, iri iiiior.matior~ pnlic\ulcorner.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.197-202
• /
• 2010

Purpose: Recently, many hospitals have been tried to increase the satisfaction of the outpatients through blood-gathering, exam, result notice and process in a day. Each laboratory has been used the automatic equipment for the rapid requests of the result notice and the increase of the reliability and efficiency. Current automatic equipments that have been limited short TAT(Turn-Around Time)because of the restricted batch lists and 1 tip-5 detectors. The Gamma Pro which is made in Korea to improve the shortcomings of existing automation equipment, complemented with capacity to perform a wide range of domestic automation equipment. In this study, we evaluated the usefulness and reliability of short TAT by comparing Gamma Pro with current automatic equipment. Materials and Methods: We studied the correlation between Gamma Pro and RIA-mat 280 using the respective 100 specimens of low or high density to the patients who were requested the thyroid hormone test (Total T3, TSH and Free T4) in Samsung Medical Center Sep. 2009. To evaluate the split-level Gamma Pro, First, we measured accuracy and carry over on the tips. Second, the condition of optimal incubation was measured by the RPM (Revolution Per Minute) and revolution axis diameter on the incubator. For the analysis for the speed of the specimen-processing, TAT was investigated with the results in a certain time. Result: The correlation coefficients (R2) between the Gamma Pro and RIA-mat 280 showed a good correlation as T3 (0.98), TSH (0.99), FT4 (0.92). The coefficient of variation (C.V) and accuracy was 0.38 % and 98.3 % at tip 1 and 0.39 % and 98.6 % at tip 2. Carry over showed 0.80 % and 1.04% at tip 1 and tip 2, respectively. These results indicate that tips had no effect on carry over contamination. At the incubator condition, we found that the optimal condition was 1.0mm of diameter at 600RPM in 1.0mm and 1.5mm of at 500RPM or 1.0mm and 1.5 mm of diameter at 600 RPM. the Gamma Pro showed that the number of exam times were increased as maximum 20 times/day comparing to 6 times/day by current automatic equipment. These results also led to the short TAT from 4.20 hour to 2.19 hours in whole processing. Conclusion: The correlation of between the Gamma Pro and RIA-mat 280 was good and has not carry over contamination in tips. The domestic automation equipment (Gamma Pro) decreases the TAT in whole test comparing to RIA-280. These results demonstrate that Gamma Pro has a good efficiency, reliability and practical usefulness, which may contribute to the excellent skill to process the large scale specimens.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.101-105
• /
• 2002

FRP(Fiber glass reinforced plastics) is compound with materials, which are created to combine each other materials, of which nature of mechanical and chemical are different. Even though the weight and the thickness are identic, its physical figure of characteristic changes with consisting of lay-up and work situation. It is also a method of creating after manufacturing of mould. It has feature that manufacturing of FRP runs parallel design of material with design of structure simultaneously. The rule of FRP structure is distinguished from the length of a ship and it is hard to catch the feature of structure mechanics due to identical formula and figure used for it regardless of the shape of a ship or the speed. This studying, basing on a small FRP ship, will show te fundamental data needed to design of structure analysing the feature of intensity with direction, the method of Lay-up, and the characteristic of materials of FRP.

• Archives of Metallurgy and Materials
• /
• v.66 no.4
• /
• pp.1013-1018
• /
• 2021

In this paper, as a purpose to apply the supersaturated solid-solutionized Al-9Mg alloy to the structural sheet parts of automotive, tensile tests were conducted under the various conditions and a constitutive equation was derived from the tensile test results. Al-9Mg alloy was produced using a special Mg master alloy containing Al₂Ca during the casting process and extruded into the sheet. In order to study the deformation behavior of Al-9Mg alloy in warm temperature forming environments, tensile tests were conducted under the temperature of 373 K-573 K and the strain rate of 0.001/s~0.1/s. In addition, by using the raw data obtained from tensile tests, a constitutive equation of the Al-9Mg alloy was derived for predicting the optimized condition of the hot stamping process. Al-9Mg alloy showed uncommon deformation behavior at the 373 K and 473 K temperature conditions. The calculated curves from the constitutive equation well-matched with the measured curves from the experiments particularly under the low temperature and high strain rate conditions.

• Journal of Sensor Science and Technology
• /
• v.17 no.4
• /
• pp.281-288
• /
• 2008

Polyacrylonitrile(PAN)/metal oxide(MO) nanocomposite mats with a thickness of 0.12 mm were electrospun by adding 0 to 10 wt% of MO nanoparticles ($Fe_2O_3$, ZnO, $SnO_2$, $Sb_2O_3-SnO_2$) into PAN. Pt electrode was patterned on $Al_2O_3$ substrate by DC sputtering and then the PAN(/MO) mats on the Pt patterned $Al_2O_3$ were electrically wired to investigate the $CO_2$ gas sensing properties. As the MO content rose, the fiber diameter decreased due to the presence of lumps caused by the presence of MOs in the fiber. The PAN/2% ZnO mat revealed a faster response time of 93 s and a relatively short recovery of 54 s with a ${\Delta}R$ of 0.031 M${\Omega}$ at a $CO_2$ concentration of 200 ppm. The difference in sensitivity was not observed significantly for the PAN/MO fiber mats in the $CO_2$ concentration range of 100 to 500 ppm. It can be concluded that an appropriate amount of MO nanoparticles in the PAN backbone leads to improvement of the $CO_2$ gas sensing properties.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.205-208
• /
• 2003

This study was conducted to develop a technology for raising rice hydroponically seedlings using the bed in which the seedlings grew in nutrient solution without soil. In Hydroponic rice seedlings, two nutrient solutions (Yashida and Wonsi) were evaluated with four supplying methods $[$3 times (2 days, 8 days and 12 days after seeding), 2 times (5 days and 10 days after seeding), and 1 time (5 days and 10 days after seeding)$]$1, Seedling growth was not different between the two solutions. However, tensile strength of root-mat was higher in Yoshida solution than in Wonsi solution. The more frequent supply of solution resulted in the better seedling growth but in the weaker root mat. Utilization efficiency of the solution minerals was not different in N content regardless of supplying frequencies, but higher in r, K, Ca and Mg when supplied only once on the 5 days after seeding.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.50-57
• /
• 1989

Tapered etching of polysilicon films has been achieved by implanting phosphorus ions into the polysilicon film and using plasma etch in either $CF_4-O_2\;or\;SF_6$. A two-step plasma etching method is also proposed to control the taper angle of the etched edge without changing the implantion conditions. The taper angle is determined by the ratio of the etch rate of the undamaged region to that of the damaged top region of the polysilicon layer. The ratio is found to be dependent on the implantion dose, the implantion energy and the anisotropy of etching. The minimum angle in our experiments is about $10^{\circ}$. When the two-step etching method is employed, the taper angles can be controlled from the minimum angle up to about $55^{\circ}$.