• 산업공학
• /
• 제16권4호
• /
• pp.463-472
• /
• 2003

In this study we consider the problem of MPS(master production planning) of TFT-LCD(Thin Film Transistor - Liquid Crystal Display) production factory. Due to the complexities of the TFT-LCD production processes, it is difficult to build effective MPS. This study presents an algorithm having a concept of IDPQ(Ideal Daily Production Quantity) that considers line balancing of TFT-LCD production process. In general, the MPS building procedure does not consider line balancing in non-bottleneck processes. MPS without considering line balancing may make ineffective schedule. We present algorithms for building MPS considering factory capacity and line balancing according to the sales order.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.798-800
• /
• 2005

In competitive electricity markets, the System Operator (SO) coordinates the overall maintenance schedules whenever the collective maintenance schedule reported to SO by Gencos & Transco in the pool does not satisfy the specified operating criteria, such as system reliability or supply adequacy. We propose a two-layer mathematical algorithm amenable to maintenance scheduling problem into master problem and sub-problem. The master problem coordinates the scheduling, and sub-problem, DC optimal power flew, checks the adequacy. The proposed algorithm was demonstrated with a case study.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권10호
• /
• pp.720-726
• /
• 2004

The data transmission over MVB(Multifunction Vehicle Bus) of TCN(Train Communication Network) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard recommends the event-polling method as the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2001년도 Proceeding of KIN-CIN Joint Symposium 2001 on Satellite Navigation/AIS, lntelligence , Computer Based Marine Simulation System and VDR
• /
• pp.49-55
• /
• 2001

It was proposed and admitted at 9$^{th}$ FERNS Metting that FERNS countries, while recognizing that Loran-C is very important as a back-up for satellite systems, should consider whether the cost-effectiveness of the system could be improved by making use of its communication facilities to inegrate more closely with satellite system, members were requested to give this proposed consideration before the tenth session of the Council (CS 9/8/1 paragph 6.7). For this matter, Korea is planning to demonstrate treasmitting EUROFIX signals from Pohang station (Master of 9930 Chain) during FERNS meetings.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.211-214
• /
• 2004

In railway system, the transportation plan corresponds to master plan for transport services. This service plan must be constructed to minimize operational cost or maximize revenue considering transportation demands and resource capacities in the operation company, and includes several sub-planning activities such as train operation frequency plan, train (schedule) plan, train capacity assignment plan, and rolling stock requirement plan. In this paper, we present profitability evaluation system for current transportation plan. The proposed system can be used for evaluating profitability by estimating train service revenue considering customer demands.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1997년도 추계학술대회발표논문집; 홍익대학교, 서울; 1 Nov. 1997
• /
• pp.121-124
• /
• 1997

This paper is concerned with the generation and use of modular BOM, which is typically utilized in representing product configurations for two-level master production schedule. A method called VCM (Value Clustering Method) is proposed to build modular BOMS. We adopted a where-used matrix to represent part-product relationships. VCM is a method that can identify modules of components based on the where-used matrix. The method uses product family group value, product value, and component value. This can facilitate retrieving information about modules, finding out alternative usage pattern of components, and recognizing modules used in a particular product.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.53-68
• /
• 1999

지금까지 전통적인 EPQ(Economic Production Quantity) 모델에서는 생산율이 수요율보다 큰 경우만을 다루어 왔으나, 실제 시장에서는 그 반대로 수요율이 생산율보다 큰 경우도 종종 발생한다. 그러나 이러한 상황에 대한 EPQ 연구는 찾아보기 어려운 실정이다. 따라서 본 논문에서는 수요율이 생산율보다 큰 상황을 고려한 확장된 EPQ 모델(Extended EPQ Model)을 유도하고, 이를 생산재고의 유한보충률 상황(Finite Replenishment Rate Environment)에서의 MPS(Master production Schedule)와 MRP(Material Requirements Planning)에 적용하였다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.634-639
• /
• 2013

The aim of the study is to develop the 3D visualization of Building Information Model and integrated 4D model for optimization of resources in the construction project. This study discuss the process of methodology and creation of 4D model of the project and simulate it to monitor the workflow at the site. Different stages of the construction process and activities are generated by using Revit and MS Project. MS project has been used for creation of the schedules and these are linked with the Revit for 3D modeling. The time used as the fourth dimension and 4D model created by using Navisworks Time liner software. Narges shopping center is presented as a case study to realize the actual uses and benefits of Building Information Model (BIM). Narges shopping mall is located in Tehran, Iran. As a part of Hekmat master plan, Narges shopping center is an 11 stores building with a total area of 30000 Sq.m. This shopping and entertainment center is comprised of 150 retails and two multi-use public halls with a capacity of 400 persons each and underground parking with total 400 parking space. The main purpose of architecture was to create an urban public center along with its revolving, spiral like form and an ever changing continuous façade by means of different colors, materials, which is in harmony with the other building of the master plan. The approximate cost of the project is $17 million and duration of the project schedule is 30 months. The developed Building Information Model enabled us to identify the potential collisions or clashes between various structural and architectural systems. 4D model has been used for limiting the interaction between subcontractors installing the different systems so rework could be avoided and productivity maximized. It is also observed that the utility of BIM for construction stimulation and clash detection is the best suitable method. Clash detection before the implementation of work is highly recommended to avoid rework.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.202-206
• /
• 2008

최근 도시재생에 대한 관심이 높아지면서 재건축사업, 도시환경정비사업 등과 관련된 메가프로젝트 들이 계획되거나 수행되고 있다. 메가프로젝트의 설계단계에서는 다수의 설계업체로 구성된 합동설계조직과 의사결정주체가 참여하여 지속적으로 의견을 조율한다. 현재 메가프로젝트를 진행하는 기관들은 합동설계조직으로부터 작성되는 다수의 다양한 도면들을 효율적으로 관리하기 위해 MA(Master Architect)방식을 도입하고 있다. 그러나 제한된 MA의 능력을 보완해 줄 수 있는 의사결정지원시스템의 부재로 설계일정 지연 등 여러 가지 문제가 발생하고 있다. 따라서 본 연구에서는 선행연구문헌 분석 및 모델프로젝트 선정과 해당 프로젝트 참여 전문가 면담을 통해 MA방식을 도입한 메가프젝트의 설계조직 구성과 의사결정체계의 문제점을 분석한다. 기본설계단계에서의 의사결정 특성을 도출한 후 이를 관리하기 위한 의사결정지원 모델을 구축하고 시스템 개발을 위한 사용자 인터페이스를 제안하였다.

• 산업공학
• /
• 제15권4호
• /
• pp.325-337
• /
• 2002

In this study we consider the problem of production planning of TFT-LCD(Thin Film Transistor - Liquid Crystal Display) production factory. Due to the complexities of the TFT-LCD production processes, it is difficult to schedule the production planning, and the study about automated scheduler is insufficient. In addition, the existing production method is a Push-System to raise the operation rate with expensive equipment, that has the problem to satisfy the due-date. This study presents an algorithm having a concept of Pull-System that satisfies the due-date and considers specialties of TFT-LCD production process. We make MPS(Master Production Schedule) according to the sales order, and present algorithms for scheduling about In/Out plan considering factory capacity, line balancing, material requirement, and inventory level of all Array, Cell, and Module processes. These algorithms are integrated as an automated production system, and we implement them in the actual TFT-LCD factory circumstance.