• Title/Summary/Keyword: Master Selection

Search Result 107, Processing Time 0.019 seconds

PLinda에서 master 선택과 성능과의 관계에 관한 연구 (A Research for Relation between Master Selection and Performance in PLinda)

  • 홍석용;박영환
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (1)
    • /
    • pp.388-390
    • /
    • 2003
  • PLinda는 기존 Linda의 개념에 폴트 톨러런트 개념을 추가하여 여러 대의 PC로 병렬 컴퓨터를 구성하는 방법을 제공한다. PLinda를 이용한 응용 중에 master-worker구조의 것이 많은데, 이 때 master는“job”튜플을 만들어 튜플 스페이스에 저장하고 결과를 읽어서 종합하게 된다. 하지만 현재 다양한 성능을 보유한 PC들 중 어떤 것을 master로 선택해야 하는지에 대한 연구가 부족한 상황이다. 본 논문에서는 PLinda master를 결정함에 있어서 최고의 컴퓨팅 파워를 얻을 수 있는 방법의 모델을 제시하고, 수학적 검증을 하였다. 그리고 실제 병렬 시스템에서의 타당성을 확인하기 위해 실험적 검증도 하였다.

  • PDF

TDOA 기반 위치탐지를 위한 DOP을 이용한 시각동기화 주수신기 선택 기법 (Method of Master Receiver Selection Using DOP for Time Synchronization in TDOA-Based Localization)

  • 김산해;송규하;곽현규
    • 한국통신학회논문지
    • /
    • 제41권9호
    • /
    • pp.1069-1080
    • /
    • 2016
  • 수동형 감시시스템과 같은 TDOA(Time Difference Of Arrival) 기반의 위치탐지시스템은 다수의 수신기를 이격 설치 후에 수신기 간 시각동기화를 수행하여 동일한 시각으로 설정하고, 수신기에 수신되는 목표 신호의 도래시간차인 TDOA를 이용하여 쌍곡선(또는 쌍곡면)의 교점을 구함으로써 목표의 2차원(또는 3차원) 위치를 추정한다. 시각동기화를 수행하기 위해서는 다수의 수신기 중에 하나가 주수신기(Master)가 되어 나머지 종수신기(Slave)들의 시간을 보정하기 위한 기준을 제공해야 한다. TDOA 기반의 위치탐지 시스템은 서로 이격되어 배치되어 있는 다수의 수신기 중에 선택되는 주수신기에 따라 위치추정정확도가 달라진다. 따라서 다수의 수신기 중에 최적의 수신기를 주수신기로 선택해야 고려하는 시스템의 배치구조에서 최적의 위치추정 성능을 도출할 수 있다. 본 논문에서는 목표와 수신기의 기하학적 배치 기반의 DOP(Dilution Of Precision) 정보를 이용하여 낮은 복잡도와 짧은 수행시간을 가지면서 시스템 내에 자동화가 용이한 주수신기 선택 방법을 제안한다.

측편형어류에 대한 트롤 끝자루의 망목선택성 (The Mesh Selectivity of Trawl Cod-end for the Compressed From Fishes)

  • 정순범;이주희;김삼곤
    • 수산해양기술연구
    • /
    • 제29권4호
    • /
    • pp.247-259
    • /
    • 1993
  • The fishing experiment was carried out by the training ship Saebada in order to analyse the mesh selectivity for trawl cod-end, in the Southern Korea Sea and the East China Sea from June. 1991 through August, 1992. The trawl cod-end used in this experiment has the trouser type of cod-end with cover net. and the mesh selectivity was examined for the five kinds of the opening of mesh in its cod-end part. A total of 163 hauls, of which having mesh size 51.2mm ; A 89, 70.2mm ; B 54, 77.6mm ; C 55, 88.0mm ; D 52 and 111.3mm ; E 20 were used respectively. Selection curves and selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b)) ). The mesh election master curves were estimated by S=1/(1+exp super(-[a(L/M)+$\beta$]) ). and the optimum mesh size were calculated with (L/M) sub(50) of master curve. In these cases 'a' and '$\alpha$' are slope, 'b' and '$\beta$' are intercept. 'L' is body length of the target species of fishes, 'M' is the mesh size, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and the results obtained are summarized as follows: 1. Red seabream Pagrus major(Temminct et Schlegel) and yellow porgy Dentex tumifrons(Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 97.5%, 91.4%, 76.7% and 57.8% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 2.65 and -28.62, 4.40 and -77.73, 2.31 and -46.99, and their selection factors were 1.39, 2.10, 1.83 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.05 and -5.65 respectively, and (L/M) sub(50) was 1.85. The optimum mesh size of Red seabream was 141mm. 2. Filefish Thamnaconus modestus (Gunther) ; Selection rate in each mesh size of A, B, C, D and E were 99.6%, 98.3%, 91.2%, 80.0% and 48.6% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 5.82 and -55.10, 2.92 and -36.90, 3.91 and -63.09, and their selection factors were 1.35, 1.44, 1.45 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.02 and -4.32 respectively, and (L/M) sub(50) was 1.43. The optimum mesh size was 129mm. 3. Target dory Zeus faber Valenciennes ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 100%, 83.2%, 91.6% and 65.0% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 3.85 and -32.46, 4.19 and -57.38, 2.45 and -40.03, and their selection factors were 1.09, 1.56, 1.47 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 2.64 and -3.53 respectively, and (L/M) sub(50) was 1.34. The optimum mesh size was 127mm. 4. Butterfish Psenopsis anomala (Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.2%, 34.1%, 46.5%, 14.3% and 2.4% respectively. Selection parameters 'a' and 'b' of mesh sizes B, C and D were 5.35 and -71.70, 5.07 and -69.25, 3.31 and -62.06 and their selection factors were 1.91, 1.75, 2.13 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.16 and -6.24 respectively, and (L/M) sub(50) was 1.98. The optimum mesh size was 71mm.

  • PDF

다점선정법에 의한 편심 및 굴절균열의 응력확대계수의 결정 (Determination of stress intensity factors of bent and eccentric cracks by multi-point selection method)

  • 김종주;서인보;최선호
    • 대한기계학회논문집
    • /
    • 제14권5호
    • /
    • pp.1079-1086
    • /
    • 1990
  • 본 연구에서는 모아레 경사격자법(moire tilted master grating method)을 개 발하여 그 유용성을 확인하고 이를 굴절 및 편심균열의 응력확대계수의 해석에 확대 적용하여 다점선정법의 적용범위를 넓히고, 또 분포균열 및 임의 형균열의 해석 가능 성을 타진하여 완성된 실험법으로서의 위치를 구축하는데 목적이 있다.

사각형강목의 끝자루를 이용한 트롤어구의 어획선택성 연구 ( I ) - 사각형강목의 어획선택성 - ( Studies on the Selectivity of the Trawl Net With the Square Mesh Cod-End ( 1 ) - Selectivity of the Square Mesh Cod-End - )

  • 이주희;김삼곤;김진건
    • 수산해양기술연구
    • /
    • 제30권3호
    • /
    • pp.161-171
    • /
    • 1994
  • Mesh selection analysis for the trawl net were carried out at the Southern Korean Sea and the East China Sea during the 1992-1994 years by the training ship Seabada of the National Fisheries University of Pusan, using A type (51.2mm), B type (70.2mm), C type (77.6mm), D type (88.0mm) square mesh cod-ends. The fishing trials were made using bottom trawl of the trouser type cod-end with cover net. Selection curves and selection parameters were calculated by a logistic model for Sphyraena pinguis, Pampus argenteus, Trachurus japonicus, Pagrus major, Callanthias japonicus, Trichiurus lepturus. The results obtained are summarized as follows: 1. Red barracuda : Selection range and fifty percent selection length in the A type was 115.8mm, 292.8mm, respectively. 2. Harvest fish : Each selection range and fifty percent selection length in the B. C. and D type was 37.7mm, 113.8mm : 40.1mm, 131.7mm and 64.8mm, 148.6mm, respectively. Selection parameters of master curve were : slope, 3.81 : intercept, -6.4. Optimum mesh size was 89.3mm. 3. Horse mackerel : Each selection range and fifty percent selection length in the A, B, C and D type was 43.0mm, 148.3mm : 60.7mm, 183.2mm, 214.5mm and 91.4mm, 254.9mm, respectively. Selection parameters of master curve were : slope 2.30 : intercept, -6.4. Optimum mesh size was 66.8mm. 4. Red seabrem : Selection range and fifty percent selection length in the D type was 42.7mm, 203.4mm, respectively. 5. Yellowsail red bass : Selection range and fifty percent selection length in the A type was 84.0mm, 110.6mm, respectively. 6. Hair tail : Each selection range and fifty percent selection length in the A, B and C type was 59.7mm, 176.0mm : 100.9mm, 250.7mm and 178.6mm, 307.0mm, respectively. Selection parameters of master curve were : slope, 1.54 : intercept, -5.4. Optimum mesh size was 57.5mm.

  • PDF

동지나해 저서 어자원에 대한 트롤어구의 어획선택성에 관한 연구-III (A Study on the Selectivity of the Trawl Net for the Demersal Fishes in the East China Sea-III)

  • 이주희;김삼곤;김민석
    • 수산해양기술연구
    • /
    • 제29권3호
    • /
    • pp.177-182
    • /
    • 1993
  • In order to estimate the mesh selectivity master curves and the optimum mesh size, experiments were made by the cover net method with the cod-ends of the five different the opening mesh sizes(51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm). After that 163 hauling were performed and there by investigated, on the training vessel Saebada in the Southern Korean Sea and East China Sea from June 1991 to August 1992. In this report, the mesh selectivity master curves were fitted by using logistic function(S=1/(1+exp super(-(aR+b))), R=(L-L sub(0))/(M-M sub(0)) and the optimum mesh sizes were estimated from each master curve. In this case, a and b are the selection parameters, M is the mesh size of each experimental cod-end. L is body length, L sub(0) and M sub(0) is the distance from the coordinate origine to intersection of linear regression between 25% and 50% selection length. The results obtained are summarized as follows; 1. Trachurus japonicus: Mesh selectivity master curve parameters: a and b were 2. 25, -4.73 respectively and optimum mesh size was estimated to be 79.3mm. 2. Trichiurus lepturus: Mesh selectivity master curve parameters: a and b were 0.81, -3.17 respectively and optimum mesh size was estimated to be 64.5mm. 3. Photololigo edulis: Mesh selectivity master curve parameters: a and b were 1.30m, -4.10 respectively and optimum mesh size was estimated to be 89.9mm. 4. Todarodes pacificus: Mesh selectivity master curve parameters: a and b were 1. 35, -3.45 respectively and optimum mesh size was estimated to be 89.4mm.

  • PDF

사각형강목의 끝자루를 이용한 트롤어구의 어획선택성 연구 ( 2 ) - 다이아몬드형강목과 사각형강목의 선택성비교 - ( Studies on the Selectivity of the Trawl Net With the Square Mesh Cod-End ( 2 ) - Comparison of Diamond and Square Mesh Cod-End - )

  • 김삼곤;이주희;박정식
    • 수산해양기술연구
    • /
    • 제30권3호
    • /
    • pp.172-181
    • /
    • 1994
  • The mesh selectivity of diamond and suare mesh cod-ends at the Southern Korean Sea and the East China Sea were compared for Pampus argenteus, Trachurus japonicus, Trichiurus lepturus. Selection trials were carried out using diamond and square mesh cod-end by trouser type cod-end with cover net. of which the mesh cod-end has four types : A(51.2mm), B(70.2mm), C(77.6mm), D(88.0mm). Selection curves and selection parameters were calculated using a logistic model. The results obained are summarized as follows : 1. Harvest fish : In B. C and D type selection range and fifty percent selection length of the square mesh were about 21mm, 11mm : 12mm, 18mm and 34mm, 5mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 1.54 and for the square mesh was 1.68. The optimum mesh size for the diamond mesh was 97.4mm and for the square mesh was 89.3mm, the difference was 8.1mm. 2. Horse mackerel : In A type, selection range was nearly the same for the diamond and the square mesh, but fifty percent selection length of the square mesh was 43mm higher than the diamond mesh. In B. C and D type, selection range and fifty percent selection length of the square mesh were about 6mm, 3mm : 24mm, 21mm and 11mm, 42mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 2.37, for the square mesh was 2.77. The optimum mesh size for the diamond mesh was 78.1mm and for the square mesh was 66.8mm, the difference was 11.3mm. 3. Hair tail : In A, B and C type, selection range of the square mesh was about 34mm, 8mm, 60mm higher than those of the diamond mesh. Fifty percent selection length for the diamond mesh was about 5mm, 7mm, 8mm higher than that of the square mesh. Selection factor of master curve for the diamond mesh was 3.11, for the square mesh was 3.48. The optimum mesh size for the diamond mesh was 64.3mm and for the square mesh was 57.5mm, the difference was 6.8mm.

  • PDF

수종 도재 색조 선택 시스템의 spectrophotometer를 이용한 색조 재현성 평가 (THE REPRODUCIBILITY OF VARIOUS PORCELAIN COLOR SELECTION SYSTEMS USING SPECTROPHOTOMETRY)

  • 김이경;조인호;신수연
    • 대한치과보철학회지
    • /
    • 제42권5호
    • /
    • pp.544-555
    • /
    • 2004
  • Statement of problem: Shade selection has traditionally been accomplished by visual examination, which is particularly relevant to the shade selection of anterior teeth, but the subjective nature of visual analysis can lead to errors in shade matching. Recently shade selection systems have been developed to provide a more objective and scientific approach to understanding and clarifying shade selection. Purpose : The purpose of this study was analysis of various shade analyzing equipment with the goal of providing a more objective shade selection. Materials and method: Visual shade matching system selection(Vita Lumin Vacuum shade guide, Vitapan 3D Master shade guide) and mechanical shade matching method($ShadeEye^{(R)}$-EX Chroma Meter, $Shadescan^{TM}$ System) used for this study. The shade guide tap specimens for 10 extracted maxillary anterior teeth were produced by selecting shades using each shade matching system. The accuracy of the selection of shades for the teeth and fabricated specimens were evaluated by analyzing the calculated shade difference(${\Delta}E^*$), using a spectrophotometer and calculating the output of value $L^*,\;a^*,\;b^*$. Results and conclusion: The results show that the average ${\{Delta}E^*$ value (difference of shade) of the shade tap specimens to the actual specimen decreased in the following order: Vita Lumin Vacuum Shade Guide(VL), $ShadeEye^{(R)}$-EX Chroma Meter(SE) Vitapan 3D Master Shade guide(V3), and $Shadescan^{TM}$ System(55) : and that there are significant statistical differences between the VL and SS (p<0.05). In the analysis of the ${\Delta}E^*$ (difference of shade) value,40% of the VL group was found to be less than 3.3 (limit value of shade tap specimens clinically acceptable), 60% in the V3 group, 50% in the SE group, and 80% in the SS group.

새우조망의 망목선택성 (Mesh Selectivity of Beam Trawl for Shrimps)

  • 오택윤;조영복;박광제;정순범;김민석;김형석;이주희
    • 수산해양기술연구
    • /
    • 제40권1호
    • /
    • pp.86-94
    • /
    • 2004
  • 새우조망 끝자루의 망목선택성을 조사하기 위한 시험조업은 여수 거문도 주변해역에서 2002년 10월 중에 끝자루의 망목을 28, 38, 51 그리고 61mm로 구성하여 덮그물 방식으로 각각 5 회씩, 총 20회 거문도 주변해역에서 실시하였다. 주 어획대상 어종인 수염대롱새우의 끝자루 망목별 어획률과 망목선택성 곡선 S=1/(1+exp$^{-{\alpha}CL+{\beta}})$)의 기울기 (a)와 절편 (b) 및 선택계수 그리고 표본망목선택성곡선 S=1/(1+exp$(^{-{\alpha}(CL/M)+{\beta}}))$)의 기울기(a)와 절편 (b) 및 적정망목을 추정한 결과는 다음과 같다. 1. 시험조업 결과 어획미수는 끝자루 11,504마리, 덮그물 12,879마리로 총 24,374마리, 313.1kg이 어획되었고 종별구성은 새우류, 어류, 게류, 연체동물 순이었으며, 부수 어획물은 어류의 자치어가 대부분을 차지하였다. 2. 끝자루 망목 28.0, 38.0, 51.0, 61.0 mm에 어획되는 대롱수염새우의 어획률은 각각 0.72, 0.63, 0.46, 0.29로 나타났다. 3. 끝자루 망목 28.0, 38.0, 51.0, 61.0 mm에 대한 선택성곡선의 a와 b 값은 0.53 -12.65, 0.35 -9.40, 0.28 -8.97과 0.24 -8.27이었고, 선택계수는 0.85, 0.71, 0.62, 0.55이었다. 4. 표본망목선택성곡선의 기울기(${\alpha}$)와 절편(${\beta}$) 값 은 8.44, -5.49이었고, 대롱수염새우의 최소성숙갑각장 20.6 mm에 대한 적정망목은 30.7 mm, 상품(上品) 최소갑각장 25 mm에 대한 적장망목은 38.5 mm로 나타났다.

태권도장의 선택속성이 만족도 및 지속적 참여의도에 미치는 영향 (The Effect of The Selection Attribute of Taekwondo Studio on Satisfaction and Continuous Participation Intention)

  • 신진호
    • 한국응용과학기술학회지
    • /
    • 제39권2호
    • /
    • pp.340-347
    • /
    • 2022
  • 본 연구는 학부모들이 인식하는 태권도장의 선택속성을 중심으로 만족도 및 지속적 참여의도 간의 영향력을 규명하여 차별화된 선택속성에 의한 경쟁력 강화와 효율적인 운영방안의 기초자료를 제공하고자 했다. 따라서 수도권에 위치한 태권도장에 등록해 자녀가 참여한 경험이 있는 학부모들을 표본으로 선정해 2021년 2월 1일부터 26일까지 조사를 실시했으며, 총 386부의 자료를 최종 분석에 이용했다. 자료처리는 SPSS(ver. 21.0) 프로그램을 활용해 빈도분석, 탐색적 요인분석, 문항내적일관성, 상관분석, 단순 및 다중회귀 분석을 실시했다. 본 연구의 주요 결과, 첫째, 태권도장의 선택속성은 시설 및 환경, 지도자, 가격, 프로그램 순으로 만족도에 영향을 미치는 것으로 나타났다. 둘쨰, 태권도장의 만족도는 지속적 참여의도에 영향을 미치는 것으로 나타났다. 셋째, 태권도장의 선택속성은 접근성, 시설 및 환경, 지도자, 프로그램 순으로 지속적 참여의도에 영향을 미치는 것으로 나타났다.