• Asian Journal of Atmospheric Environment
• /
• v.9 no.2
• /
• pp.173-186
• /
• 2015

In Bangladesh, increases in the tropospheric ozone ($O_3$) concentration and in soil salinization may lead to crop damage. To clarify the effects of $O_3$ and/or soil salinity on Bangladeshi wheat cultivars, BAW1059 (salt-tolerant) and Shatabdi (salt-sensitive) were exposed to 70-day treatments with $O_3$ (charcoal-filtered air (CF), $1.0{\times}O_3$, and $1.5{\times}O_3$) and different levels of soil salinity (0, 4, and $8dS\;m^{-1}$). In both cultivars, the whole-plant dry mass and grain yield were significantly reduced by exposure to $O_3$. Increased soil salinity caused significant reductions in whole-plant growth and yield in Shatabdi, but the reductions were negligible in BAW1059. No significant interactions between $O_3$ and salinity were detected for growth, yield, and leaf gas exchange parameters in both cultivars. We concluded that the effects of $O_3$ are not ameliorated by soil salinity in two Bangladeshi wheat cultivars, regardless of their salinity tolerance.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.4
• /
• pp.571-577
• /
• 2003

The intracellular metabolic fluxes can be calculated by metabolic flux analysis, which uses a stoichiometric model for the intracellulal reactions along with mass balances around the intracellular metabolites. In this study, metabolic flux analyses were carried out to estimate flux distributions for the maximum in silico yields of various metabolites in Escherichia coli. The maximum in silico yields of acetic acid and lactic acid were identical to their theoretical yields. On the other hand, the in silico yields of succinic acid and ethanol were only 83% and 6.5% of their theoretical yields, respectively. The lower in silico yield of succinic acid was found to be due to the insufficient reducing power. but this lower yield could be increased to its theoretical yield by supplying more reducing power. The maximum theoretical yield of ethanol could be achieved, when a reaction catalyzed by pyruvate decarboxylase was added in the metabolic network. Futhermore, optimal metabolic pathways for the production of various metabolites could be proposed, based on the results of metabolic flux analyses. In the case of succinic acid production, it was found that the pyruvate carboxylation pathway should be used for its optimal production in E. coli rather than the phosphoenolpyruvate carboxylation pathway.

• Journal of Hydrogen and New Energy
• /
• v.19 no.1
• /
• pp.56-63
• /
• 2008

In this study, thermochemical degradation of hemicellulose by Acetone-Solvolysis, the effects of reaction temperature, conversion yield, degradation properties and degradation products were investigated. Experiments were performed in a tube reactor by varying reaction temperature from $200{\circ}C$ to $400{\circ}C$ at 40 min of reaction time. The liquid products from pyrolysis-liquefaction of hemicellulose contained various kinds of ketones. ketones, as 4-methyl-3-penten-2-one, 3-methylene-2-pentanone, 22,6-dimethyl-2, 5-heptadien-4-one, 4-methyl-2-pentanone, 5-methyl-2-hexanone, 3,5,5-trimethyl-2-cyclohexen-1-one, and bezenes. as 1,4-dimethylbenzene, 1-methyl-2-(1-methylethyl)-benzene, 1,4-dimethyl-2-(2-methylpropyl)benzene, 4-secbutyl-ethyl benzene, could be used as high-octane-value fuels and fuel additives. Combustion heating value of liquid products from thermochemical conversion processes of hemicellulose was in the range of $6,680{\sim}7,170cal/g$. After 40min of reaction at $400{\circ}C$ in Acetone-Solvolysis of hemicellulose, the energy yield and mass yield was as high as 72.2% and 41.2g oil/100g raw material, respectively.

• Journal of Hydrogen and New Energy
• /
• v.16 no.2
• /
• pp.159-169
• /
• 2005

Cellulose, consisted of 45 wt% in wood, is usable as fuels and heavy oil additives if depolymerized to monomer unit, because the chemical structures are similar to high octane materials found in gasoline. In this study, thermochemical degradation by solvolysis reaction of cellulose such as the effect of reaction temperature, reaction time and type of solvent on conversion yield and degradation products were investigated. It was found that the effectiveness of the solvent on the sovolysis reaction was as follows; acetone>n-butanol>tetralin. When acetone was used as a solvent, the highest cellulose conversion was observed to be 91.8% at 500$^{\circ}C$, 40min. Combustion heating value of liquid products from thermochemical conversion processes was in the range of 7,330${\sim}$7,410cal/g. The energy yield and mass yield in acetone-solvolysis of cellulose was as high as 66.8% and 37.0 g oil/100g raw material after 40min of reaction at 400$^{\circ}C$. Various aliphatic and aromatic compounds were detected in the cellulose solvolysis products. The major components of the solvolysis products, that could be used as fuel, were mesityl oxide, mesitylene, isophorone.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• Journal of Hydrogen and New Energy
• /
• v.15 no.4
• /
• pp.333-340
• /
• 2004

In this study, thermochemical degradation by pyrolysis-liquefaction of cellulose, the effects of reaction time, reaction temperature, conversion yield, degradation properties and degradation products were investigated . Experiments were performed in a tube reactor by varying reaction time from 20 to 80 min at $200{\sim}500^\circ{C}$. Combustion heating value of liquid products from thermochemical conversion processes of cellulose was in the range of 6,920~6,960cal/g. After 40min of reaction at $400^\circ{C}$ in pyrolysis-liquefaction of cellulose, the energy yield and mass yield was as high as 54.3% and 34.0g oil/100g raw material, respectively. The liquid products from pyrolysis-liquefaction of cellulose contained various kinds of ketones, phenols and furans. ketones and furans could be used as high-octane-value fuels and fuel additives. However, phenols are not valuable as fuels.

• Journal of Hydrogen and New Energy
• /
• v.18 no.1
• /
• pp.85-94
• /
• 2007

Rice straw, produced as an agricultural by-product, is usable biomass as fuels if depolymerized to monomer unit, because the chemical structure are similar to high octane materials found in gasoline. In this study, parameters of thermochemical degradation by solvolysis reaction of rice straw such as the effect of reaction temperature, reaction time and type of solvent on conversion yield and degradation products were investigated. It was found that the effectiveness of the solvent on the solvolysis reaction was as follows; acetone>cresol>butanol. When acetone was used as a solvent, the highest rice straw conversion was observed to be 91.5% at $500^{\circ}C$, 40 min. Combustion heating value of liquid products from thermochemical conversion processes was in the range of 7,380 cal/g. The energy yield and mass yield in acetone-solvolysis of rice straw was as high as 69.0% and 38.2 g-oil/100g-raw material after 40 min of reaction at $350^{\circ}C$. Various aliphatic and aromatic compounds were detected in the rice straw solvolysis products. The major components of the solvolysis products, that could be used as fuel, were 4-methyl-2-pentanone, 3,5,5-trimethyl-2-cyclopentan-1-one as ketones.

• Microbiology and Biotechnology Letters
• /
• v.16 no.2
• /
• pp.85-91
• /
• 1988

Energy efficiency of bacterial cell mass and product formation from cellulose using Ruminococcus albus and Ruminococcus flavefaciens with application of available electron balance were discussed. Values of true growth yield, η$_{max}$ and η$^{max}_{th}$ and maintenance coefficient, m$_{e}$, were estimated us-ing experimental data, and the results were compared with estimates obtained from theoretical ap-proach. Experimental values were similar in magnitude to theoretical values in $Y^{max}_{ATP}$= 10.5 g cells/ mole ATP. Therefore, $Y^{max}_{ATP}$ values of Ruminococcus albus and Ruminocoecus flavefaciens were considered similar to 10.5 g cells/mole ATP.

• Microbiology and Biotechnology Letters
• /
• v.28 no.5
• /
• pp.298-302
• /
• 2000

Fermentation parameters were estimated by use of a vent gas analyzer coupled to a computer data acquisition system in cultivation of Phellinus linteus WI-001, pro-ducer of polysaccharides known to have potent anticancer activities. Oxygen uptake rate(OUR), a critical indicator of the cells activities, was calculated by applying oxygen mass balance. In addition, by dividing the oxygen uptake rate hy the total oxygen consumed, on-line estimation of the cells specific growth rate was successfully done. It was also possible to estimate cell concentration directly bt use of oxygen-cell yield($Y_{x/o}$ ) which was obtained based on a correlation between cell growth and total oxygen consumed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.387-390
• /
• 2007

Advanced-MVA(A-MVA) for LCD-TV application was proposed to yield high performance LCD-TV. By utilizing Additional Refresh Technology(ART), which has 2-TFTs but with single source and gate line only. The A-MVA can yield low color washout, fast response, and optimized brightness. AMVA has become the promising solution of advanced LCDTV panels for mass-production.