• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권3호
• /
• pp.27-35
• /
• 2001

Heat transfer characteristics of a heat exchanged for low temperature waste heat recovery using oscillating capillary tube heat pipe (OCHP) were evaluated against the charging ratio variation of working fluid and various working fluids. R-l42b, R-22 and R-290 were used as working a 2.6mm in outside diameter, 1.44mm in inside diameter with 101m length and 140 turns. Charging ratio of working fluid was 40% and 50%. water was used as secondary fluid. Inlet temperature and mass velocity for each secondary fluid were 297 K, 280 K and 9~27 $4kg/m^2s$, respectively. From experimental results, it was found that heat transfer performance of R-22 was higher than those of R-142b and R-290 and it was proportional to Figure of Merit for thermosyphon. As a result, it was thought that R-22 was the most reasonable working fluid of waste heat recovery for low temperature waste heat recovery.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.659-666
• /
• 2000

Heat transfer characteristics of a heat exchanger for low temperature waste heat recovery using oscillating capillary tube heat pipe were evaluated against the charge ratio variation of working fluid and various working fluids. R-l42b, R-22 and R-290 were used as working fluids. The heat exchanger was composed of heat pipe with capillary tube bundles, having a 2.6mm in outer diameter, 1.4mm in inner diameter with 101m long, and 40 turns. Charge ratio of working fluid was 40% and 50%. Water was used as secondary fluid. Inlet temperature and mass velocity for each secondary fluid were 297 K, 280 K and9~27 kg /$m^2s$,, respectively. From experimental results, it was found that heat transfer performance of R-22 was higher than those of R-l42b and R-290 and it was proportional to Figure of merit for thermosyphons. As a result, it was thought that R-22 was the most suitable working fluid of waste heat recovery for low temperature waste heat recovery.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.111-121
• /
• 2020

The fouling of Nanofiltration membrane (NF) was examined using wastewater containing reactive black dye RB5 of 1500 Pt/Co color concentrations with 16890 mg/l TDS collected from El-alamia Company for Dying and Weaving in Egypt. The NF-unit was operated at constant pressure of 10 bars, temperature of 25℃, and flowrate of 420 L/min. SEM, EDX, and FTIR were used for fouling characterization. Using the ROIFA-4 program, the total inorganic fouling load was 1.07 mM/kg present as 49.3% Carbonates, 10.1% Sulfates, 37.2% Silicates, 37.2% Phosphates, and 0.93% Iron oxides. The permeate flux, recovery, salt rejection and mass transfer coefficients of the dye molecules were reduced significantly after fouling. The results clearly demonstrate that the fouling had detrimental effect on membrane performance in dye removal, as indicated by a sharp decrease in permeate flux and dye recovery 68%. The dye mass transfer coefficient was dropped dramatically by 34%, and the salt permeability increased by 14%. In this study, all the properties of the membrane used and the fouling that caused its poor condition are identified. Another study was conducted to regeneration fouled membrane again by chemical methods in another article (Abdel-Fatah et al. 2017).

• 설비공학논문집
• /
• 제1권3호
• /
• pp.219-227
• /
• 1989

Performance analysis of an absorption heat pump system for solar energy recovery has been done by computer simulation to find improved working pairs. Based on the thermodynamic analysis, the coefficient of performance and mass flow ratio have been calculated to compare two aqueous solutions [LiCl-water, $LiCi-CaCl_2-Zn(NO_3)_2$-water] which were developed for cooling by others, with the conventional LiBr-water solution. As a result of this analysis, the performances of the new aqueous solutions were found to be better than that of LiBr-water solution not only in cooling systems, but also in heating and in heat transformer systems. Their theoretical thermodynamic performance data were given here with.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.61-70
• /
• 1994

This study was executed to find the applicability of press drying of tree disk by investigating the shrinkage and drying defect and to form appropriate model by comparing the actual moisture content(MC) and internal temperature in respect of drying time with calculated values based computer simulation to which was applied finite difference method. In press drying disk, heating period, constant drying rate period maintained plateau temperature at 100$^{\circ}C$ and falling drying rate period were significantly distinguished. Actual MC and internal temperature were analogous to those calculated at comparing points. Heat transfer model formed by Fourier's law using specific heat of moist wood and conduction coefficient considering fractional volume of each element of wood cell wall, bound water, free water and air showed applicability as basic data to developing heat expansion, shrinkage and drying stress during press drying. Also mass transfer model formed by Fick's diffusion law using water vapor diffusion coefficient showed applicability. Longitudinal shrinkage was developed by pressure of hot press and tangential shrinkage was restrained by hygrothermal recovery. The heart check, surface check and ring failure were occurred differently in species, but V-shaped crack didn't develop.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제39권1호
• /
• pp.34-38
• /
• 2019

In this study, we investigated the effect of silkworm, and its by-products on exercise endurance, muscle mass, and fatigue recovery using ICR mice model. Powders of silkworm, pupae, dongchunghacho, and silk powder were suspended in water and feed to mice for 2 weeks. The forced swimming time was increased by 4.3, 4.1 and 2.8 seconds after silkworm, pupae, and dongchughacho administration compared to DW fed group. Increases in exercise ability were achieved by difference mechanism according to feeding materials. Pupae increased muscle mass by 129% compared with the control group which may effect on elongation of swimming time. Dongchunghacho improved the plasma concentrations of fatigue markers such as creatinine, blood urea nitrogen (BUN), and D-lactate. Silkworm administration showed dual effect, the muscle mass induction (114% vs. control) and anti-fatigue (plasma creatinine, BUN, and D-lactate were 63, 75, and 78% vs. con) effect which contributed most elongated swimming time. In conclusion, silkworm and its by-products including pupae and dongchunghacho with the predominant protein and bioactive components improved muscle mass and showed anti-fatigue effect which could promote exercise performance ability.

• 자원리싸이클링
• /
• 제7권1호
• /
• pp.41-49
• /
• 1998

알루미늄계 응집제를 사용한 수처리시 발생하는 슬러지를 산으로 처리하여 응집제를 회수하는 방안과 그로 인한 잔류 슬러지의 부피 및 질량감소, 탈수성질의 변화, 그리고 산처리시의 영향요인 등에 관해 논의하였다. 회수된 응집제의 특성은 알루미늄의 함량, 응집 효율성, 잔류 불순물들에 의해 평가될 수 있다. 산처리후 발생하는 잔류 슬러지의 처리방법 및 실제 공정 운영에의 적용사례 등에 관해서도 논의하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1199-1203
• /
• 2005

Combined sewer overflows(CSOs) are themselves a significant source of water pollution. Therefore, the control of urban drainage for CSOs reduction and receiving water quality protection is needed. Examples in combined sewer systems include downstream storage facilities that detain runoff during periods of high flow and allow the detained water to be conveyed by an interceptor sewer to a centralized treatment plant during periods of low flow. The design of such facilities as stormwater detention storage is highly dependant on the temporal variability of storage capacity available(which is influenced by the duration of interevent dry periods) as well as the infiltration capacity of soil and recovery of depression storage. As a result, a contiunous approach is required to adequately size such facilities. This study for the continuous long-term analysis of urban dranage system used analytical Probabilistic model based on derived probability distribution theory. As an alternative to the modeling of urban drainage system for planning or screening level analysis of runoff control alternatives, this model have evolved that offer much ease and flexibility in terms of computation while considering long-term meteorology. This study presented rainfall and runoff characteristics or the subject area using analytical Probabilistic model. Runoff characteristics manifasted the unique characteristics of the subject area with the infiltration capacity of soil and recovery of depression storage and was examined appropriately by sensitivity analysis. This study presented the average annual COSs and number of COSs when the interceptor capacity is in the range 3xDWF(dry weather flow). Also, calculated the average annual mass of pollutant lost in CSOs using Event Mean Concentration. Finally, this study presented a dicision of storage volume for CSOs reduction and water quality protection.

• 대한환경공학회지
• /
• 제37권5호
• /
• pp.262-268
• /
• 2015

본 연구는 on-line micro extraction by packed sorbent (on-line MEPS)와 시료다량주입장치인 programmed temperature vaporizer (PTV) injector를 결합한 가스크로마토그래피 질량분석 시스템을 이용하여 유기인계 농약인 methyldemetone-S, diazinon, fenitrothion, parathion, phentoate, O-ethyl O-(4-nitrophenyl) phenylphosphonothioate (EPN)과 카바이트계인 carbaryl에 대한 동시 수질분석법을 확립하였다. MEPS 내 sorbent는 polystyrene divinylbenzene (PDVB) 재질을 이용하였다. 시료전처리시 추출용매 종류, pH, 추출용매량 및 시료주입왕복횟수가 분석에 미치는 영향과 정도보증(QA/QC), 그리고 환경시료에 대한 각 물질의 회수율을 평가하였다. 추출용매는 acetone과 dichloromethane을 80 : 20 (v/v)으로 혼합하여 사용하였고, 내부표준물질과 황산을 첨가한 시료 1 mL를 대상으로 추출용매량 $30{\mu}L$, 시료주입왕복횟수를 7회로 추출하여 분석조건을 최적화하였다. pH가 낮을수록 Diazinon의 분석감응도는 감소한 반면 carbaryl의 분석감응도는 증가하였다. 정도보증결과 항목별 방법검출한계 및 정량한계는 각각 $0.02{\sim}0.18{\mu}g/L$, $0.08{\sim}0.59{\mu}g/L$로 낮았으며, 농도범위 $0.5{\sim}5.0{\mu}g/L$ 수준에서 정밀도와 정확도 범위는 각각 1.5~11.5%, 83.3~129.8%로 나타났다. 환경시료 중 carbaryl을 제외한 모든 항목의 회수율은 75.7~129.3%로 적합하였다. Carbaryl에 대한 회수율은 수돗물, 지하수, 하천수 분석에서 적합한 범위를 나타냈으나, 하수처리방류수에서는 200% 이상으로 만족하지 못하였다.

• 대한기계학회논문집B
• /
• 제36권3호
• /
• pp.293-299
• /
• 2012

대형 선박의 추진용 디젤엔진에서 버려지는 배기가스의 열을 회수하기 위한 랭킨사이클이 적용된 발전시스템에 대하여 R245fa 및 water 의 작동유체들에 따른 열역학적 효율 특성을 분석하였다. 그 이론적인 계산 결과로, 고정된 질량유량의 R245fa 에 대하여 터빈입구의 압력이 증가할수록 사이클, 시스템, 및 전체적 효율이 증가하였고, 사이클에 의해 발생되는 순동력도 증가하는 특성을 보였다. 반면, water 의 경우에는 R245fa 에 비하여 더 낮은 질량유량 및 터빈입구 압력의 비율에서 최대의 시스템 효율을 보였다. 또한 water 에 대하여 최적화된 사이클의 순출력, 시스템 효율, 및 전체적 효율의 값들은 R245fa 의 경우보다 더 크게 나타났다.