• Tunnel and Underground Space
• /
• v.19 no.5
• /
• pp.440-449
• /
• 2009

LCM test is one of the most powerful and reliable methods of experiment for the cutter head design and the performance prediction of TBM. In many cases, however, the predicted design model can be directly applied to the field design, because this test may have an uppermost limit in preparation and/or transportation of the large size rock samples and the test for the jointed rock mass is not easy. When the proper and reasonable numerical modeling is considered to overcome this limit, the most adequate cutter head design for TBM could be presented without any complicate preconsideration in the field. In this study, the crack propagation patterns dependent on the contact point of disc cutter and the angle of rock joint are analyzed for the rock specimen with a single joint using the UDEC. The authors could derive the appropriate contact points of disc cutters and their space with respect to the joint angle in rock mass thru the numerical analysis.

• Journal of Plant Biotechnology
• /
• v.31 no.2
• /
• pp.121-126
• /
• 2004

Bleeding heart (Dicentra spectabilis L. Lemaire) is one of the most valuable wild flower in Korea. This work was conducted for the mass production of somatic embryos through suspension culture and more effective plant regeneration system in Dicentra spectabilis. High-frequency embryogenic callus proliferation was achieved in SH liquid medium supplemented with 1 mg/L 2,4-D. Half-strength SH medium was suitable concentration for somatic embryo induction and germination. About 5,000 embryos were produced per 250$m\ell$ flask after 4 weeks of culture. Germination rate of somatic embryos was decreased when GA$_3$ was added in medium. The plantlets showed a 58％ survival rate when transferred to pots after 1 month of culture. The results indicate that micropropagation procedure via somatic embryogenesis can be applied for an efficient mass propagation of Dicentra spectabilis.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1897-1904
• /
• 2019

Three-layer back propagation network (BPN) and genetic neural network (GNN) were developed in this study to predict the flow boiling heat transfer coefficient (HTC) in conventional and small-diameter channels. The GNN has higher precision than BPN (with root mean square errors of 17.16% and 20.50%, respectively) and other correlations. The inputs include vapor quality x, mass flux G, heat flux q, diameter D and physical parameter φ, and the predicted flow boiling HTC is set as the outputs. Influences of input parameters on the flow boiling HTC are discussed based on the trained GNN: nucleate boiling promoted by a larger saturated pressure, a larger heat flux and a smaller diameter is dominant in small channels; convective boiling improved by a larger mass flux and a larger vapor quality is more significant in conventional channels. The HTC increases with pressure both in conventional and small channels. The HTC in conventional channels rises when mass flux increases but remains almost unaffected in small channels. A larger heat flux leads to the HTC growth in small channels and an increase of HTC was observed in conventional channels at a higher vapor quality. HTC increases inversely with diameter before dry out.

• Structural Engineering and Mechanics
• /
• v.42 no.6
• /
• pp.831-847
• /
• 2012

Impact from water-borne debris during tsunami and flood events pose a potential threat to structures. Debris impact forces specified by current codes and standards are based on rigid body dynamics, leading to forces that are dependent on total debris mass. However, shipping containers and other debris are unlikely to be rigid compared to the walls, columns and other structures that they impact. The application of a simple one-dimensional model to obtain impact force magnitude and duration, based on acoustic wave propagation in a flexible projectile, is explored. The focus herein is on in-air impact. Based on small-scale experiments, the applicability of the model to predict actual impact forces is investigated. The tests show that the force and duration are reasonably well represented by the simple model, but they also show how actual impact differs from the ideal model. A more detailed three-dimensional finite element model is also developed to understand more clearly the physical phenomena involved in the experimental tests. The tests and the FE results reveal important characteristics of actual impact, knowledge of which can be used to guide larger scale experiments and detailed modeling. The one-dimensional model is extended to consider water-driven debris as well. When fluid is used to propel the 1-D model, an estimate of the 'added mass' effect is possible. In this extended model the debris impact force depends on the wave propagation in the two media, and the conditions under which the fluid increases the impact force are discussed.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.66-81
• /
• 2011

In this study, it was aimed to develop a thermal-hydraulic-mechanical coupled fracture mechanics code that models a fracture initiation, propagation and failure of underground rock mass due to thermal and hydraulic loadings. The development was based on a 2D FRACOD (Shen & Stephasson, 1993), and newly developed T-M and H-M coupled analysis modules were implemented into it. T-M coupling in FRACOD employed a fictitious heat source and time-marching method, and explicit iteration method was used in H-M coupling. The validity of developed coupled modules was verified by the comparison with the analytical result, and its applicability to the fracture initiation and propagation behavior due to temperature changes and hydraulic fracturing was confirmed by test simulations.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.44-44
• /
• 2019

This study aimed to develop a suitable method for inducing the proliferation of prothallus and producing sporophytes of rock polypody (Polypodium vulgare L.). The prothalli used in all experiments were obtained from spore germination and sub-cultured for 8-week intervals. The most appropriate media for prothallus propagation were investigated by culturing 300 mg of prothallus in MS ($1/4{\times}$, $1/2{\times}$, $1{\times}$, and $2{\times}$ strength) medium and in Knop medium for 8 weeks. Cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $30{\pm}1.0{\mu}mol-m-2{\cdot}s-1$, and a photoperiod of 16/8 h (light/dark). Fresh weight of prothalli was 4.8 g on $1{\times}$ MS, 4.5 g on $1/2{\times}$ MS and 4.3 g on 1/4 MS medium. To select a suitable soil combination for sporophyte formation, 1.0 g of prothallus was ground with distilled water, spread in five combinations onto different soil substrates (decomposed granite, horticultural substrates, peat moss, and perlite), and then cultivated for 13 weeks. The sporophyte cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $43{\pm}2.0{\mu}mol-m-2{\cdot}s-1$, humidity of $84{\pm}1.4%$, and a photoperiod of 16/8 h (light/dark). The results showed that a mixture containing a 2:1 (v:v) ratio of horticultural substrate and perlite, increased sporophyte formation to 462.5 sporophytes per pot (7.5 cm2). The other soil substrates produced from 314.5 to 405.3 sporophytes per pot. Therefore, our results will provide conditions suitable for mass production of Polypodium vulgare L.

• Economic and Environmental Geology
• /
• v.9 no.4
• /
• pp.213-223
• /
• 1976

Proceeding from general elementary principles to more specific abstract problems, we have attempted the rearrangement of the research results as they are known at present concerning the propagation and attennation of the elastic wave in submarine layers. We have derived the elementary equations of the elastic wave. In addition, the relationship of the propagation of the elastic waves in the sea water mass and the reflection of the waves from the water-sediment interface are treated and presented in different sections.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1692-1701
• /
• 2001

This study describes the combustion characteristics under various condition of air excess ratio and ignition timing in a 2-valve SI optically accessible engine with swirl control valve(SCV). It adapted three different types of SCV(open ratio 72.5%, 78%, 59%) to strengthen a swirl flow. Pressure data were acquired using pressure sensor to investigate the effect of swirl flow on combustion, and from these pressure data, IMEP(indicated mean effective pressure) and MFB(mass fraction burnt) were calculated to explain burn rate and flame speed. From acquired flame images, we inspected the flame propagation direction, flame area, and flame centroid. Flame propagation direction showed different tendency between with/without SCV, and flame area with SCV was faster and larger than that of conventional engine. Finally, the representative flame images at each crank angle were acquired by PDF method to verify flame growth process. It is found that strengthened swirl flow is more beneficial for faster and stable combustion.

• Geomechanics and Engineering
• /
• v.33 no.6
• /
• pp.529-542
• /
• 2023

Wave propagation with high transverse deflection could affect the stability of the ball in its trajectory. For low stiffness balls similar to soccer and volleyball balls, the waves are more noticeable in comparison to other balls like ping-pong ball. On the other hand, the soccer balls are under heavy impact loads from shoots and contacting different objects in the field. The maximum recorded speed of a soccer ball after kicking is the 211 km/hr and the average maximum speed is around 112 km/hr. Therefore, in such speeds the aerodynamic forces become important which are directly related to geometrical shape of the ball. In this regard, the wave propagation in soccer ball is examined in the current study using large deformation shear deformable formulations. Classical relations of stress-strain components are taken into consideration along with minimum total energy principle. The final derived relations were solved by using harmonic differential quadrature method. The results are generally presented ion term of phase velocity as function of different influencing parameters of the materials, geometry and mass of the ball.

• Earthquakes and Structures
• /
• v.5 no.6
• /
• pp.753-779
• /
• 2013

One of the most important issues in progressive collapse mechanism of the buildings is evaluation of the collapse distribution in presence of the earthquake loads. Here, collapse propagation is investigated by tracking down the location and type of the collapsed beam and column elements, from the first element to the entire buildings. 6-story reinforced concrete ordinary moment resisting frame buildings with one directional mass eccentricity of 0%, 5%, 15% and 25% are studied to investigate differences among the progressive collapse mechanism of the regular and irregular buildings. According to the results of the nonlinear time history analyses, there are some patterns to predict progressive collapse scenarios in beam and column elements of the similar regular and irregular buildings. Results also show that collapse distribution patterns are approximately independent of the earthquake records.