• Journal of Fashion Business
• /
• v.10 no.3
• /
• pp.78-86
• /
• 2006

Coffee extract dyeing on silk fabric using various mordanting agents at different mordanting condition was studied in our previous research. Coffee extract dyeing can exert beautiful colors and have several advantages over the conventional natural dyeing. Since most of natural dyes are expensive for mass production, strongly season and source dependent, and hard to store, and therefore, coffee waste was used as natural dye to create beautiful colors in this study. Coffee waste is inexpensive and easy to store, and provide a comparatively regular quality regardless of season and source. The effects of dyeing condition such as dyeing temperature, dyeing time, and liquor ratio on dyeing characteristics of silk fabrics were investigated. Coffee extract dyed silk showed brilliant colors, and the colors were different with the kind of mordant. Cu, Sn, and Al mordanted silks showed golden yellow with subtle change of hue and value, while Fe mordanted silk showed a brownish green color upon coffee extract dyeing. As the dyeing temperature increased, the dyeability generally increased in all mordanted silk fabrics except Fe mordanted silk until $45^{\circ}C$. The dyeing temperature did not affect the dyeability of Fe mordanted silk fabric. As the liquor ratio increased, the dyeability showed a gradual increase in all mordanted silk except Cu mordanted silk. Cu mordanted silk fabric showed an abrupt increase in dyeability at liquor ratio1:150. The dyeing time effect can be separated into 2 stages. During the initial half an hour, the dyeability did not change significantly, and then, increased after 45 min. dyeing time duration. A further increase in dyeing time after 45 min. did not affect the dyeing efficiency in all mordanted silk fabrics except the Cu mordanted.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.863-875
• /
• 2006

Intensive visibility monitoring was conducted to investigate physical and chemical characteristics of visibility impairment by airborne pollen. Light attenuation coefficients were optically measured by a transmissometer, a nephelometer, and an aethalometer. Elemental, ionic, and carbonaceous species were chemically analyzed on the filters collected by $PM_{2.5}$ and $PM_{10}$ samplers. Aerosol size distribution was analyzed using a cascade impactor during airborne pollen period. Airborne pollen count was calculated using a scanning electron microscope. Airborne pollen was emitted into the atmosphere in springtime and funker degraded visibility through its scattering and absorbing the light. Average light extinction coefficient was measured to be $211{\pm}36Mm^{-1}$ when airborne pollen was not observed. But it increased to $459{\pm}267Mm^{-1}$ during the airborne pollen period due to increase of average $PM_{2.5}$ and $PM_{10}$ mass concentration and relative humidity and airborne pollen count concentration for $PM_{10}$, which were measured to be $46.5{\pm}29.1{\mu}g\;m^{-3},\;97.0{\pm}41.7{\mu}g\;m^{-3},\;54.1{\pm}11.6%$, and $68.2{\pm}89.7m^{-3}$, respectively. Average light extinction efficiencies for $PM_{2.5}$ and $PM_{10}$ were calculated to be $5.9{\pm}0.9$ and $4.5{\pm}0.8m^2 g^{-1}$ during the airborne pollen period. Light extinction efficiency for $PM_{10}$ increased further than that for $PM_{2.5}$. The average light extinction budget by airborne pollen was estimated to be about 24% out of the average measured light extinction coefficient during the airborne pollen period.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.103-110
• /
• 1998

Pyroelectric infrared detectors based on La-modified $PbTiO_{3}$ (PLT) thin films have been fabricated by RF magnetron sputtering and rnicrornachining technology. The detectors form $Pb_{l-x}La_{x}Ti_{1-x/4}O_{3}$ (x=0.05) thin film ferroelectric capacitors epitaxially grown by RF magnetron sputtering on Pt/MgO (100) substrate. The sputtered PLT thin film exhibits highly c-axis oriented crystal structure that no poling treatment for sensing applications is required. This is an essential factor to increase the yield for realization of an infrared image sensor. Micromachining technology is used to lower the thermal mass of the detector by giving maximum sensor efficiency. Polymide is coated on top of the sensing elements to support the fragile structure and the backside of the MgO substrate is selectively etched to reduce the heat loss. The sensing element exhibited a very high detectivity D* of $8.5{\times}10^{8}cm{\cdot}\sqrt{Hz}/W$ at room temperature and it is about 100 times higher than the case of micromachining technology is not used. A sensing system that detects the position as well as the existence of a human body is realized using the array sensor.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.342-347
• /
• 1999

Kiwifruit pulp was separated into insoluble pulp and serum by centrifugation at 14,000 rpm for 10 min. The serum portion was concentrated at $30{\sim}50mmHg\;and\;50{\sim}55^{\circ}C$ with aroma recovery. Vapor generated at the early stage of vacuum evaporation was condensed and taken as aroma fractions: $E-I\;(0{\sim}10%),\;E-II,\;(10{\sim}20%)$. The volatile flavor compounds in kiwifruit pulp were collected by dynamic headspace technique and analyzed by GC and GC/MSD. The yield of serum separated from kiwifruit pulp was 70.1% and insoluble pulp fraction contained aroma compounds more than that of the serum. Twenty-six aroma compounds, including (E)-2-hexanal and ethyl butanoate were detected. The efficiency of the aroma recovery was reduced as the recovery time was extended, as indicated by the less peak numbers and kiwifruit areas of aroma fractions.

• KSBB Journal
• /
• v.22 no.4
• /
• pp.197-200
• /
• 2007

This study examined the conditions of filtration and concentration of methanol extract from biomass. Filtration efficiency was improved by adding diatomaceous earth as a filter aid. The optimal amount of diatomaceous earth was 6% (w/w) to reduce the filtration time. The filtration time was reduced by 4.2% in first extraction, 30.0% in second extraction, 22.8% in third extraction, and 19.0% in fourth extraction, respectively. The optimal temperature of water bath was below 50$^{\circ}C$ for preventing paclitaxel degradation during concentration of methanol extract using a rotary evaporator. The temperature of concentrated solution in rotary evaporator was relatively low compared to bath temperature because of latent heat of evaporation. The stopping point of concentration in rotary evaporator for the following step was at a specific gravity of 0.96 of the concentrated solution in terms of the purity and yield of paclitaxel. This information is very useful for mass extraction of biomass for the recovery of paclitaxel from plant cell culture.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.203-207
• /
• 2007

In this study, the combustion characteristics of HTPB was studied in hybrid propulsion system. In this experiments HTPB was used as fuel, GOX was used as oxidizer. The mass flow rate of GOX was controlled by the several chocked orifices that have different diameter, and the oxidizer supply range was $13.8{\sim}42.7g/sec$. The experimental result of HTPB was compared with the other studies of HTPB, and the combustion performance of HTPB was analyzed with that of PE. As a result, the homing rate and efficiency of HTPB as fuel were better than that of PE in the same hybrid motor.

• Clean Technology
• /
• v.18 no.2
• /
• pp.123-143
• /
• 2012

Supercritical fluid technology (SFT) is recently one of the most new techniques, which has been interested various fields of related chemical industries. SFT is the most effective and practical technology with eco-friendly, energy-savings, and high efficiency as the technique using the advantages of supercritical fluid such as high solvation power, solubility, mass transfer rate, and diffusion rate. Especially, it is necessary to analyze, evaluate, and develop the potential of application techniques using SFT with these characterizations. Therefore in this review, the phase behavior in supercritical fluid at high temperature and pressure of monomers/polymers for the optimization of polymerization process are briefly described, and the preparation of molecularly imprinted polymers (MIPs) in supercritical fluid using supercritical polymerization and the performance evaluation of MIPs are introduced.

• Journal of the Korean Dietetic Association
• /
• v.9 no.2
• /
• pp.138-148
• /
• 2003

The purpose of this study was to analyze information about food and nutrition topics presented throughout the television broadcast media, thereby suggest the optimal communication method to give right information to the general public. To perform this study, total sixteen monitoring people were recruited and trained through monitoring practice before and during the study . Five domestic TV channels were selected to be monitored, for six months. For the best efficiency, all the monitoring people were divided into 8 teams based on the regional consideration. The statistical analysis of data was completed using SAS program. The main results of this study are as follows. First, the total reporting cases of information about foods and nutrition were 237 , among which about 30% was classified as appropriate and 70% as inappropriate based on the trained monitors' evaluation. Second, the analysis of contents about incorrect informations showed that the insufficient descriptions of terminology and contents were the highest. And insufficient scientific evidences, incorrect contents excessively entertainment-oriented, no provision of alternatives , improper selection of expert advisors were followed. These results suggest that systematical monitoring should be continued to reduce the frequency of incorrect communication thereby give the right information in food and nutrition area to the general public. And there should be a closely cooperated system to provide the professional information to broadcasting production team by establishing the strategic program. In order to do that, most importantly the advisory team should be organized to professionally connect mass media to corresponding specialists. In addition, more educational programs about food and nutrition should be developed to provide right information to the general public.

• Membrane Journal
• /
• v.28 no.5
• /
• pp.297-306
• /
• 2018

This review focused carbon-free hydrogen productions from ammonia decomposition including inorganic membranes, catalysts and the presently studied reactor configurations. It also contains general information about hydrogen productions from hydrocarbons as hydrogen carriers. A Pd-based membrane (e.g. a porous ceramic or porous metallic support with a thin selective layer of Pd alloy) shows its efficiency to produce the high purity hydrogen. Ru-based catalysts consisted of Ru, support, and promoter are the efficient catalysts for ammonia decomposition. Packed bed membrane reactor (PBMR), Fluidized bed membrane reactor (FBMR), and membrane micro-reactor have been studied mainly for the optimization and the improvement of mass transfer limitation. Various types of reactors, which contain various combinations of hydrogen-selective membranes (i.e. Pd-based membranes) and catalysts (i.e. Ru-based catalysts) including catalytic membrane reactor, have been studied for carbon-free hydrogen production to achieve high ammonia conversion and high hydrogen flux and purity.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.4
• /
• pp.57-63
• /
• 2008

The characteristics of the bio-oil produced by the pyrolysis process with pig feces was investigated in this paper. The continuous auger-type reactor produced bio-oil was maintained at the temperature range of 400 to $600^{\circ}C$, which was higher than a typical that in a conventional pyrolysis system. The pig feces was used as the feedstock. The bio-oil and its compositions were characterized by water analysis, heating values, elemental analysis, bio-oil compounds, by Gas Chromatography/Mass Spectrometry (GC/MS), and functional group by $^1H$ NMR spectroscopy. It was found that the maximum bio-oil yields of 21% w.t. was achieved at $550^{\circ}C$. This result suggested that this auger reactor might be a potential technology for livestock waste treatment to produce bio-oil because it is able to be improved to reach higher efficiency of bio-oil production in further study. The pyrolysis system reported herein had low heat transfer into the feedstock in the auger reactor so that it needs improve the heat conduction rate of the system in further study.