• Journal of ILASS-Korea
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2016

A gasoline injector rig which can measure cumulative injected fuel mass under a vehicle driving condition was developed. The measurement system consists of an engine control unit (ECU), data acquisition (DAQ) and injected fuel collection system using loadcells. By supplying reconstructed sensor signals which simulate the real vehicle's sensor signals to the ECU, the ECU drives injectors as if they were driven in the vehicle. The vehicle's performance was computer simulated by using $GT-Suite^{(R)}$ software based on both engine part load performance and automatic transmission shift map. Throttle valve position, engine and vehicle speed, air mass flow rate et al. were computer simulated. The used vehicle driving pattern for the simulation was FTP-75 mode. For reconstructing the real vehicle sensor signals which are correspondent to the $GT-Suite^{(R)}$ simulated vehicle's performance, the DAQ systems were used. The injected fuel was collected with mess cylinders. The collected fuel mass in the mess cylinder with elapsed time after starting FTP-75 driving mode was measured using loadcells. The developed method shows highly improved performance in fast timing and accuracy of the cumulative injected fuel mass measurement under the vehicle driven condition.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2949-2951
• /
• 2011

It is expected that domestic railway vehicle operation companies may be subjected to GHG emission reduction when GHG emission system is enforced. This study aimed that reviewing on GHG emission system such as CDM, VCS and KCER, and analysing availability of GHG emission credit acquisition for railroad transportation sector. In order to estimate GHG emission credit, a GHG emission estimation methodology should be developed, which includes GHG emission baseline estimation and GHG emission monitoring method, MRV method and etc. Modal shift project, high speed train technology, straight lining project, mass transportation technology, operation optimization tehcnology and etc. may produce GHG emission credit.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.3
• /
• pp.67-73
• /
• 2003

Manufacturing technologies of compound semiconductor are similar to the process of memory device, but management technology of manufacturing process for compound semiconductor is not enough developed. Semiconductor manufacturing environment also has been emerged as mass customization and open foundry service so integrated manufacturing system is needed. In this study we design the integrated manufacturing system for compound semiconductor fabrication t hat has monitoring of process, reduction of lead-time, obedience of due-dates and so on. This study presents integrated manufacturing system having database system that based on web and data acquisition system. And we will implement them in the actual compound semiconductor fabrication.

• Analytical Science and Technology
• /
• v.36 no.1
• /
• pp.12-21
• /
• 2023

Protein glycation is vital to aging and disease. However, glycated proteins are low-abundant in plasma, rendering them difficult to identify using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Many studies have analyzed glycated peptides with high reproducibility. Here, glycated peptides in human serum were analyzed by LC-MS/MS using data-dependent acquisition (DDA) and parallel reaction monitoring (PRM). Boronic acid (BA) enrichment of in vitro glycated human serum peptides was performed. BA enrichment identified the most glycated peptides, and the glycated peptides of the more diversified proteins, excluding albumin, were analyzed. In PRM, glycated albumin PSMs were the most common, and this method exhibited the best reproducibility. The results of this study could help compare methods for identifying glycation-related biomarkers.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.2
• /
• pp.109-120
• /
• 2016

Purpose : This study surveyed the relationship between the dietetic behaviors of high school students and nutrition information available from mass media thereby suggesting the way of improving the dietetic health promotion of adolescents. Method : This study surveyed coeducational high school students in S region. 220 questionnaires have been collected and analyzed, which is statistically significant as in other previous studies. The survey lasted for one month, March 14 through April 14 in 2016. The statistical analysis was performed by using the windows version 21.0 of SPSS. Primarily, the frequency analysis and descriptive statistics was carried out on the general information, the usage and confidence of mass media, and the diabetic behaviors of respondents. t-Test and One-way ANOVA were adopted to clarity the mass media usage and diabetic behaviors of respondents for general characteristics. Result : The statistical analysis on the diet usage of mass media among high school students shows that famous restaurants(Response rate 51%) and diet control(20%) are highly evaluated, but disease prevention(15%) is low. Regarding the dietetic information acquisition, the mass media including TV, radio, and Internet appear as main information carriages (p<.001). The confidence in mass media are analyzed in the relation with 10 dietetic behaviors, and 4 items(meal amount: p<.011, vegetable intake: p<.005, protein intake: p<.003) are inversely related to the mass media, which means regular intake party is less dependent of the exterior information. The seaweed(p<.017) intake is statistically significant in confidence level. Conclusion : To increase the interest and the health promotion of students, the dietetic information need to be offered in mass media and education course.

• Structural Engineering and Mechanics
• /
• v.61 no.6
• /
• pp.785-794
• /
• 2017

This paper is concerned with the comparative numerical and experimental study on the natural behavior and the motion responses of a 1/75 moored scale model of a 2.5 MW spar-type floating offshore wind turbine subject to 1-D regular wave. Heave, pitch and surge motions and the mooring tensions are investigated and compared by numerical and experimental methods. The upper part of wind turbine which is composed of three rotor blades, hub and nacelle is modeled as a lumped mass and three mooring lines are pre-tensioned by means of linear springs. The numerical simulations are carried out by a coupled FEM-cable dynamics code, while the experiments are performed in a wave tank equipped with the specially-designed vision and data acquisition system. Using the both methods, the natural behavior and the motion responses in RAOs are compared and parametrically investigated to the fairlead position, the spring constant and the location of mass center of platform. It is confirmed, from the comparison, that both methods show a good agreement for all the test cases. And, it is observed that the mooring tension is influenced by all three parameters but the platform motion is dominated by the location of mass center. In addition, from the sensitivity analysis of RAOs, the coupling characteristic of platform motions and the sensitivities to the mooring parameters are investigated.

• Food Science of Animal Resources
• /
• v.41 no.5
• /
• pp.816-825
• /
• 2021

This study aims to validate a fast method of simultaneous analysis of 365 LCamenable and 142 GC-amenable pesticides in hen eggs by liquid chromatography-tandem mass spectrometry (LC-MS/MS) and gas chromatography-tandem mass spectrometry (GC-MS/MS), respectively, operating in multiple reaction monitoring (MRM) acquisition modes. The sample preparation was based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction. Key method performance parameters investigated were specificity, linearity, limit of quantification (LOQ), accuracy, precision and measurement uncertainty. The method was validated at two spiking levels (10 and 50 ㎍/kg), and good recoveries (70%-120%) and relative standard deviations (RSDs) (≤20) were achieved for 92.9% of LC-amenable and 86.6% of GC-amenable pesticide residues. The LOQs were ≤10 ㎍/kg for 94.2% of LC-amenable and 92.3% of GC-amenable pesticides. The validated method was further applied to 100 egg samples from caged hens, and none of the pesticides was quantified.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.546-552
• /
• 1999

In order to obtain the highly effective thermal energy from jacket cooling water of propulsion diesel engines. a development of the Fresh Water Generator (FWG) with a capacity of 30 ton/day was implemented. Newly developed experimental devices and data acquisition system were used to evaluate the performance of the FWG. In this study experiments were performed for various driving pressures by varying the mass flowrate of cooling seawater with or without a heat source instead of jacket cooling water.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.786-796
• /
• 2011

The purpose of this study was to investigate the relationship between bone mineral density(BMD), body composition and life styles of female college students. The subjects were 334 students with a mean age of 21.0 years. BMDs of forearm and calcaneus were measured by dual energy X-ray absorptiometry, and body composition was measured by bioelectrical impedence analysis. The means for weight, height, and body mass index(BMI) of the subjects were 55.7 kg, 161.0 cm, 21.5 kg/$m^2$, respectively. Grouping by the BMI, 13.2% of the subjects were classified as overweight, and 11.1% of the subjects as obese group. BMD in the forearm and calcaneus were 0.390 g/$cm^2$, 0.514 g/$cm^2$. In the forearm, 58.1% and 9.6% of the subjects were classified as osteopenia and osteoporosis, respectively, and in the calcaneus, 12.0% and 0.3% of the subjects were classified as osteopenia and osteoporosis, respectively. Body weight, skeletal muscle mass, lean body mass, fat mass and BMI were positively correlated with BMDs in the forearm and calcaneus($r$=0.180~0.495, $p$ <0.01~0.001), and height, % body fat and waist-hip ratio(WHR) were positively correlated with BMDs in the calcaneus($r$=0.213~0.239, $p$ <0.001), but not in the forearm. The factors such as beginning age of cigarette smoking and alcohol drinking and exercise had significant influence on BMD($p$ <0.05; p<0.001), whereas sleeping hours, activity level, frequency of exercise, meal times, frequency of snack and fried food intake, breakfast skipping and amount of meal had not significant influence on BMD. Therefore, the acquisition of balanced body composition is necessary through the increase of fat free mass and muscle mass, not through the increase of fat mass among female college students.

• Ocean and Polar Research
• /
• v.25 no.1
• /
• pp.53-62
• /
• 2003

Inductively coupled plasma mass spectrometry (ICP-MS) is useful instrument for determining abundance of rare earth elements, due to very low detection limits and rapid data acquisition. In this article, two methods are used for decomposition of alkaline rocks; close vessel acid digestion and $Na_2Co_3$ fusion. The two analytical results show good agreements. Considering total dissolved solids and detection limits, the most adequate dilution factor is 5,000 times. Polyatomic ion interferences during analysis can give rise to Inaccuracies. After correction from oxide and hydroxide interference, the analytical result show 20-30% decrease for Gd and Tm, 10-20% decrease for Tb and Er. In comparing the analytical results from KORDI with other institutes, most rare earth elements abundance show good agreements except Lu.