• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.3
• /
• pp.1-10
• /
• 2002

Because of the reduced number of displayable gray levels resulting from inverse gamma correction, images on a plasma display panel (PDP) exhibit undesirable false contours in dark areas. An error diffusion method has been applied to remedy this problem. However, it is computationally expensive and requires large memory resources. This paper proposes a computationally efficient dithering based technique to improve the gray level reproduction capability in dark areas. In the proposed method, multiple dithering masks ate utilized in turn to improve the gray level reproduction in dark areas. Also, in order to reduce undesirable regular patterns generated by the dithering method, positions of threshold values within a given dithering mask are changed. Compared to the error diffusion method, the proposed method requires much less computations and memory resources with a comparable gray level reproduction capability.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.208-217
• /
• 2001

Model-based color image halftoning method using dot-pattern database is proposed for low-resolution color image printing. Dot-pattern database used in the proposed method is based on Blue-Noise Mask. The database consists of dot-patterns constructed by circular dot-overlap model according to each color value. In halftoning procedure, input color value is reproduced as the dot-pattern selected to minimize the difference between the color values of the original image and those of the printed image. Also, the contrast sensitivity function as a human visual model is used to improve the perceived quality of the printed image in dot-pattern selection. Thus, the proposed method can substantially reproduce the color values of the pixels in original image and obtain better image quality. In the experiment, the proposed method has less ΔΕ/Sub ab/ between the original image in monitor and the printed one than that of ED and BNM halftoning. This result approves that the proposed method reproduces better image quality.

• Fire Science and Engineering
• /
• v.18 no.4
• /
• pp.16-21
• /
• 2004

This paper has investigated influences of pollutants in air-breathing on the respirators and it by year of disused air respirators that fire fighter is using in domestic cutting done air respirators after collection observed state of cylinder material through instrumental analysis, and cut open pipe to confirm pollution degree of pipe from cylinder of air respirators to airline mask and confirm pollution availability. The metal surface inside the air respirators was corroded by moisture included in the compressed air. The material generated by corrosion is white powder of less then 100㎛, which is analyzed as aluminum hydroxide corroded by moisture. This aluminum hydroxide powder may get into the lung while one breathes in, and it is easy to be attached to the lung so it will cause a serious influences to human health. This study suggests that Korea should set out the standards for components and composition of breathing air as soon as possible.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.140-143
• /
• 2004

To appropriately control or compensate breathing motion of targets in thorax or abdomen during radiotherapy is still demanding. Our idea is that a visual signal may help regulate patient's breathing pattern, by controlling its amplitude and cycle. The system involving breathing control with a visual signal for aperture maneuver with controlled breath (AMC) has been developed. A thermocouple is used to detect the temperature change due to patient's breathing. The system also consists of a mask, in which the thermocouple is installed, an operational amplifier, a converter, etc. Patients were instructed to control their respiration by breathing following the visuals signal, as watching a display that shows both patients' current breathing pattern and the signal. The patterns of patients' controlled breathing and the signals coincided well. Therefore, when AMC technique is applied, a target moves in the range that is 60 % less than the range of free breathing motion with the help of the system and so target margins can be reduced significantly. This study reveals that a visual signal is not only useful to control patient's breathing but also clinically effective.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.3 no.3
• /
• pp.129-140
• /
• 2016

This article reports the development of biodegradable photoluminescent polymer (BPLP)-based nanoparticles (NPs) incorporating either magnetic nanoparticles (BPLP-MNPs) or gadopentate dimeglumine (BPLP-Gd NPs), for cancer diagnosis and treatment. The aim of the study is to compare these nanoparticles in terms of their surface properties, fluorescence intensities, MR imaging capabilities, and in vitro characteristics to choose the most promising dual-imaging nanoprobe. Results indicate that BPLP-MNPs and BPLP-Gd NPs had a size of $195{\pm}43nm$ and $161{\pm}55nm$, respectively and showed good stability in DI water and 10% serum for 5 days. BPLP-Gd NPs showed similar fluorescence as the original BPLP materials under UV light, whereas BPLP-MNPs showed comparatively less fluorescence. VSM and MRI confirmed that the NPs retained their magnetic properties following encapsulation within BPLP. Further, in vitro studies using HPV-7 immortalized prostate epithelial cells and human dermal fibroblasts (HDFs) showed > 70% cell viability up to $100{\mu}g/ml$ NP concentration. Dose-dependent uptake of both types of NPs by PC3 and LNCaP prostate cancer cells was also observed. Thus, our results indicate that BPLP-Gd NPs would be more appropriate for use as a dual-imaging probe as the contrast agent does not mask the fluorescence of the polymer. Future studies would involve in vivo imaging following administration of BPLP-Gd NPs for biomedical applications including cancer detection.

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.175-182
• /
• 2017

Noises are usually generated by various external causes and low quality devices in image data acquisition and recording as well as by channel interference in image transmission. Since these noise signals result in the loss of information, subsequent image processing is subject to the corruption of the original image. In general, image processing is performed in the mixed noise environment where common types of noise, known to be Gaussian and impulse, are present. This study proposes an iterative weighted mean filter for reducing mixed type of noise. Impulse noise pixels are first turned off in the input image, then $3{\times}3$ sliding window regions are processed by replacing center pixel with the result of weighted mean mask operation. This filtering processes are iterated until all the impulse noise pixels are replaced. Applied to images corrupted by Gaussian noise with ${\sigma}=10$ and different levels of impulse noise, the proposed filtering method improved the PSNR by up to 12.98 dB, 1.97 dB, 1.97 dB respectively, compared to SAWF, AWMF, MMF when impulse noise desities are less than 60%.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.2
• /
• pp.223-230
• /
• 2012

Purpose : The purpose of this study was to analyze weight bearing of cane and affected foot at different speeds during walking. Methods : Thirteen subjects (6 males, 7 females) with stroke enrolled in the study. A foot sensor and an instrumented cane were integrated to analyze the vertical peak force on the affected foot and the cane. Results : The applied vertical peak force on the cane were $12.02{\pm}4.80%$ (slow speed), $7.97{\pm}3.95%$ (comfortable speed), and $6.86{\pm}3.30%$ (fast speed) body weight, respectively. The results indicated significantly lower vertical peak force on the affected foot in the low speed walking condition when compared to the fast walking (p<.05) and the comfortable walking (p<.05) conditions. The correlations between TUG and vertical peak force on the cane and affected foot were .71, and -.70 (p<.01). There was a higher correlation between the vertical peak force on the cane and affected foot were -.87(p<.01). Conclusion : In conclusion, slower walking speed applied greater vertical peak force on the cane. On the contray, slower walking speed applied less vertical peak force on the affected foot. Further studies, duration of force should be measured at different speeds during walking in lower and higher functioning hemiparetic subjects, as its use may mask underlying gait impairment.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.10 no.1
• /
• pp.30-45
• /
• 2001

In recent years, clinicians' and dentists' esthetic demands in dentistry have increased rapidly. The ultimate goal in modern restorative dentistry is to achieve "white" and "pink" esthetics in the esthetically important zones. Therefore, modern esthetic dentistry involves not only the restoration of lost teeth and their associated hard tissues, but increasingly the management and reconstruction of the encasing gingiva with adequate surgical techniques. Interdental space are filled by interdental papilla in the healthy gingiva, preventing plaque deposition and protecting periodontal tissue from infection. This also inhibits impaction of food remnants and whistling through the teeth during speech. These functional aspects are obviously important, but esthetic aspects are important as well. Complete and predictable restoration of lost interdental papillae remains one of the biggest challenges in periodontal reconstructive surgery. One of the most challenging and least predictable problems is the reconstruction of the lost interdental papilla. The interdental papilla, as a structure with minor blood supply, was left more or less untouched by clinicians. Most of the reconstructive techniques to rebuild lost interdental papillae focus on the maxillary anterior region, where esthetic defects appear interproximally as "black triangle". Causes for interdental tissue loss are, for example, commom periodontal diseases, tooth extraction, excessive surgical periodontal treatment, and localized progressive gingiva and periodontal diseases. If an interdental papilla is absent because of a diastema, orthodontic closure is the treatment of choice. "Creeping" papilla formation has been described by closing the interdental space and creating a contact area. In certain cases this formation can also be achieved with appropriate restorative techniques and alteration of the mesial contours of the adjacent teeth. The presence of an interdental papilla depends on the distance between the crest of bone and the interproximal contact point, allowing it to fill interdental spaces with soft tissue by altering the mesial contours of the adjacent teeth and positioning the contact point more apically. The interdental tissue can also be conditioned with the use of provisional crowns prior to the definitive restoration. If all other procedures are contraindicated or fail, prosthetic solutions have to be considered as the last possibility to rebuild lost interdental papillae. Interdental spaces can be filled using pink-colored resin or porcelain, and the use of a removable gingival mask might be the last opportunity to hide severe tissue defects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2067-2073
• /
• 2001

Biometric systems are forms of technology that use unique human physical characteristics to automatically identify a person. They have sensors to pick up some physical characteristics, convert them into digital patterns, and compare them with patterns stored for individual identification. However, lip-print recognition has been less developed than recognition of other human physical attributes such as the fingerprint, voice patterns, retinal at blood vessel patterns, or the face. The lip print recognition by a CCD camera has the merit of being linked with other recognition systems such as the retinal/iris eye and the face. A new method using multi-resolution architecture is proposed to recognize a lip print from the pattern kernels. A set of pattern kernels is a function of some local lip print masks. This function converts the information from a lip print into digital data. Recognition in the multi-resolution system is more reliable than recognition in the single-resolution system. The multi-resolution architecture allows us to reduce the false recognition rate from 15% to 4.7%. This paper shows that a lip print is sufficiently used by the measurements of biometric systems.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.12 no.2
• /
• pp.111-114
• /
• 2012

Attention deficit hyperactivity disorder (ADHD) is characterized by inattention, impulsivity, and hyperactivity. Given high incidence of ADHD, many children with ADHD is likely to present for anesthesia. This case report suggests intramuscular premedication as an alternative method for anesthetic induction. A 9-year-old male patient with ADHD was transferred for dental treatment under general anesthesia. The patient refused to go into dental clinic office. Oral midazolam was given to the patient, however, he was resistant to take midazolam via oral route. Instead, we administer midazolam and ketamine via intramuscular route. After less than 10 miniutes, the patient became drowsy and was transferred to dental chair. Intravenous access and mask inhalation was possible. The patient received dental treatment under general anesthesia and recovered in a non-complicated way. In this case, intramuscular sedation with midazolam and ketamine was used as a premedication in highly uncoopearive patient refused to take oral sedative medication.