• 한국도로학회논문집
• /
• 제2권4호
• /
• pp.123-131
• /
• 2000

아스팔트 포장의 배합설계 방법에서 사용하고 있는 마샬시험 장치는 다짐장치와 안정도 헤드의 주요한 두 부분으로 이루어져 있다. 다짐장치는 시료의 공극과 다짐도에 영향을 미치며 안정도헤드는 마샬안정도와 흐름치에 영향을 주기 때문에 다짐장치의 규격과 타격에너지, 안정도헤드의 형상은 어떠한 경우라도 일치하여야 배합설계시 최적아스팔트 함량을 정확하게 분석 할 수 있다. 그러나, 본 연구의 결과에 의하면 국내에서 사용되고 있는 마샬시험 장치는 서로 다른 규격과 형상을 가지고 있음은 물론, 각 기관마다 다짐장치를 설치하는 조건과 각 제조회사 장치의 받침목이 서로 상이하여 시험 결과의 오차는 물론 아스팔트 포장의 공용성에도 크게 영향을 미치기 때문에 마샬시험 장치의 범 국가적인 재정비가 필요한 것으로 나타났다.

• 한국도로학회논문집
• /
• 제6권4호
• /
• pp.13-24
• /
• 2004

국내의 각종 시방서 및 지침에 수록되어 있는 기존 마샬 배합설계 방법은 일본 도로공단의 규격을 도입하여 사용한 것이다. 이러한 배합설계 방법은 최근의 도로 포장의 공용성에 많은 문제점을 야기시키는 원인 중의 하나로 인식되어지고 있다 따라서 현재 외국의 배합설계 과정에서 가장 많이 이용되고 있는 용적 개념의 도입을 통해 개선된 마샬 배합설계 방법을 제시하고자 한다. 본 연구를 통해 개선된 배합설계 방법은 공극률 4%에 해당하는 아스팔트 함량을 예비 최적 아스팔트 함량으로 결정한 후 포화도, VMA(골재 간극률), 안정도, 흐름값의 마샬 물성치를 만족하면 이를 최적 아스팔트 함량으로 정하는 방법이다. 이러한 배합설계 방법은 기존 방법에서는 고려하지 않는 VMA 값을 도입하였으며, 현장에서 오차가 많이 발생되는 마샬 안정도 시험을 설계 요소가 아닌 검토 요소로 정함으로써 배합설계의 오류를 줄이는 방법이다. 실내 실험을 통한 기존 방법과 개선 방법의 비교 결과. 공극률을 제외한 최적 아스팔트 함량, 밀도, 안정도, 그리고 흐름값의 마샬 물성치에서는 비슷한 결과값을 나타내었다. 이는 개선 방법을 적용할 때 다른 마샬 물성치들은 큰 변동이 없이 일정한 공극률을 가지는 혼합물 생산이 가능하다는 것을 나타낸다. 따라서 개선된 마샬 배합설계 방법은 현장에서 일정한 공극률(4%)을 가지는 혼합물의 생산을 가능하게 하고, 이는 아스팔트 혼합물의 품질 향상에 큰 도움을 줄 것으로 생각된다.

• 한국도로학회논문집
• /
• 제1권2호
• /
• pp.135-154
• /
• 1999

Compaction of asphalt pavement is one of the important processes to make good quality one. There are many laboratory-compaction methods to simulate field compaction, including Marshall compaction, Hveem compaction, gyratory compaction, and etc. The most common method used to determine the fundamental properties of asphalt mixture for design is Marshall method which is using impact energy. However, there is major difference between field compaction using kneading compaction and Marshall compaction using impact energy. Therefore, the gyratory compactor, which currently is the best to simulate the field compaction, was employed. The fundamental properties of asphalt specimen compacted by gyratory compactor and Marshall compactor were determined using laboratory test. From the tests, slag mixture with carbon black or pyrolyzed carbon black showed better performances, such as, in low susceptibility to temperature, high resistance against water and rutting, and high resilient modulus and indirect tensile strength.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.17-34
• /
• 1996

본 논문의 주된 목적은 폐자원(첨가제로서 pyrolyzed carbon black과 굵을 골재로서 aircooled iron blast furnace slag)을 사용한 아스팔트 콘크리트의 기본특성을 설명하는 것이다. 최적의 아스팔트 함유량을 결정하기 위하여 Marshall Mik Design방법을 이용하였고, 최적의 아스팔트 함유량은 첨가제의 양에 따라 변하며,그 범위는 6.7%에서 7.57%로 나타났다. 최적의 아스팔트 함유량을 이용하여 아스팔트 콘크리트 시편을 제작하였고, dynamic creep 실험을 수행하였다. Pyrolyzed carbon black과 Furnace slag의 사용은 Marshall stability를 증가시켰고, 비교적 높은 온도(5$0^{\circ}C$)와 137.gkpa의 구속 압력하에서 아스팔트 콘크리트의 시간에 따른 변형률을 감소시켰고, 또한 시간에 따른 아스팔트 콘크리트의 stiffness감소 비율을 줄여주는 역할을 하였다. 본 실험결과로 부터 첨가제로서의 pyrolyzed carbon black과 굵은 골재로서의 slag의 사용은 Marshall stability, stiffness, rutting resistance에 좋은 결과를 나타내는 것으로 밝혀졌다.

• Geomechanics and Engineering
• /
• 제33권1호
• /
• pp.11-18
• /
• 2023

This study explores a new energy partitioning approach to determine the fracture toughness of 3-D printed pristine/recycled high density polyethylene (HDPE) blends employing the essential work of fracture (EWF) concept. The traditional EWF approach conducts a uniaxial tensile test with double-edge notched tensile (DENT) specimens and measures the total energy defined by the area under a load-displacement curve until failure. The approach assumes that the entire total energy contributes to the fracture process only. This assumption is generally true for extruded polymers that fracture occurs in a material body. In contrast to the traditional extrusion manufacturing process, the current 3-D printing technique employs fused deposition modeling (FDM) that produces layer-by-layer structured specimens. This type of specimen tends to include separation energy even after the complete failure of specimens when the fracture test is conducted. The separation is not relevant to the fracture process, and the raw experimental data are likely to possess random variation or noise during fracture testing. Therefore, the current EWF approach may not be suitable for the fracture characterization of 3-D printed specimens. This paper proposed a new energy partitioning approach to exclude the irrelevant energy of the specimens caused by their intrinsic structural issues. The approach determined the energy partitioning location based on experimental data and observations. Results prove that the new approach provided more consistent results with a higher coefficient of correlation.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.21-30
• /
• 2015

PURPOSES : The purpose of this study was to evaluate the performance of rapid-setting polymer-modified asphalt mixtures with a high reclaimed asphalt pavement (RAP) content. METHODS: A literature review revealed that emulsified asphalt is actively used for cold-recycled pavement. First, two types of rapid-setting polymer-modified asphalt emulsion were prepared for application to high-RAP material with no virgin material content. The quick-setting polymer-modified asphalt mixtures using two types of rapid-setting polymer-modified asphalt emulsion were subjected to the following tests: 1) Marshall stability test, 2) water immersion stability test and 3) indirect tensile strength ratio test. RESULTS AND CONCLUSIONS : Additional re-calibration of the RAP was needed for laboratory verification because the results of analyzing RAP aggregates, which were collected from different job sites, did not deviate from the normal range. The Marshall stability of each type of binder under dry conditions was good. However, the Type B mixtures with bio-additives performed better in the water immersion stability test. Moreover, the overall results of the indirect tensile strength test of RAP mixtures with Type B emulsions exceeded 0.7. Further research, consisting of lab testing and on-site application, will be performed to verify the possibility of using RAP for minimizing the closing of roadways.

• Journal of applied mathematics & informatics
• /
• 제40권5_6호
• /
• pp.925-931
• /
• 2022

In this article, we compare the reliability and the hazard function between a baseline distribution and the corresponding transmuted-G distribution. Some examples based on existing transmuted-G distributions in literature are used. Three tests of parameter significance are utilized to test the importance of a transmuted-G distribution over the baseline distribution, and real data is used in an application of the inference about the importance of transmuted-G distributions.

• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1391-1396
• /
• 2008

In this paper, we consider two components system which the lifetimes have Marshall and Olkin's bivariate exponential model with bivariate type I censored data. We propose a Bayesian independent test procedure for above model using fractional Bayes factor method by O'Hagan based on improper prior distributions. And we compute the fractional Bayes factor and the posterior probabilities for the hypotheses, respectively. Also we select a hypothesis which has the largest posterior probability. Finally a numerical example is given to illustrate our Bayesian testing procedure.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.305-308
• /
• 2008

This paper describes a research study on the durability and strength properties of thin quiet-permeable asphalt concrete. Such asphalt mixes have high porosity, which offers significantly better drainages than normal mix designs. However, these materials also exhibit poor durability and strength limiting their use in pavement application. To remedy this, fiber and polymer modifiers have been proposed. All samples were added to modified binder which were prepared with or without the modifiers and fiber using Marshall mix procedures and were experimentally tested using various standardized testing procedures including percent air void for porosity, cantabro test and marshall stability. In general, the results of marshall stability showed that modified mixtures were equivalent to unmodified mixtures. Especially, the result of cantabro tested modified mixtures was superior to unmodified mixtures.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.57-63
• /
• 2013

PURPOSES: This study is to investigate the Hot In-Place recycling asphalt mixture in Korea using field produced materials. METHODS: Hot In-Place reclaimed asphalt mixture was investigated to evaluate the mixture properties based on various test results such as Marshall Test, Indirect Tensile Test, TSR, and Wheel Tracking Test. These test values were compared with domestic standard specification. RESULTS: The result of the laboratory experiment indicates that the Hot In-Place Reclaimed(HIR) asphalt mixture produced at the field constrution site was satisfied all of the test criteria such as Indirect tensile test, Marshall and TSR test, and wheel tracking test. During the test, the research team found that current HIR system is required an extention of mixing time to improve quality and to reduce variation of sample to sample. Although the current HIR mixture was passed the test criteria, there is a potential capability to enhance the mixture properties as extend mixting time. CONCLUSIONS: Based on these laboratory test results, It would be concluded that domestic HIR mixture's properties were satisfied all standard specification related with evaluation of recycling asphalt mixtures. Based on this case study result, there is a chance to save construction cost and increase the usage of reclaimed asphalt concrete in the future.