• Journal of Climate Change Research
• /
• v.1 no.3
• /
• pp.205-210
• /
• 2010

LED light has various advantages such as an energy saving effect of over 80% compared to existing lighting and environmentally friendly characteristics; however, there has been no affordable market for LED lighting because of its expensive price. This study discussed the validity of the expansion of distribution of LED lighting through an assessment of economic efficiency concerning LED lightening in order to analyze its efficiency in terms of energy savings and maintenance and repair, which will be generated as a result of the change from existing incandescent bulbs to LED lighting in the public sector. As to the target of analysis, the paper reviewed the validity of change to LED lighting as a result of the elimination of existing incandescent bulbs, by referring to 'the current incandescent bulb use and elimination performance' published by the Ministry of Knowledge Economy based on the "Elimination management system" executed by Korea Energy Management Corporation. The paper considered expenses for change, annual power savings amount and electric charges savings amount, repair and maintenance cost, $CO_2$ reduction volume, and the profit from the sale of CER (certified emission reduction). As a result of analyzing economic efficiency, when the discount rate during the change of existing incandescent bulb lighting to LED lighting is 3.26%, the profit was 8,648,400,000 won. Accordingly, NPV was analyzed to have a 'positive (+)' value, which means that this change is profitable.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.2
• /
• pp.160-177
• /
• 2019

In this study, we examined the distribution of dealers and the repair parts management system of a Japanese car manufacturer in the Chinese market in looking at the case of Toyota. We conducted our research by obtaining information from a GAC Toyota dealer about the current distribution of dealers and locations of warehouses throughout China, as well as the status of stocks and the distribution system for repair and maintenance parts. The results of our investigation showed that although GAC Toyota has 437 dealers throughout the country, there is an imbalance in distribution towards the coastal areas, after the population ratios and other measurements are factored in. Therefore, it can be said expansion towards the inland regions, where demand for automobiles has increased in recent years, has been stunted. On the other hand, there is a high correlation between gross GDP by region and the number of stores, and it can be pointed out that the company prioritizes the sale of high-priced vehicles in major coastal areas where the economy is large, rather than selling low-priced vehicles for inland consumers with a relatively small economic scale. The company also has difficulty in securing dealers that can provide sufficient after-sales service. According to the regulations of GAC Toyota, the company require dealers to have at least 1,500 repair and maintenance parts in stock. Also, when exchanging maintenance parts, GAC Toyota's emphasis is on increasing customer satisfaction by giving sufficient explanations for customers and obtaining consent from them. As a result, the company's dealers need financial resources to continue their business from a long-term perspective. However, it can be pointed out that such dealers are limited, and it is difficult to distribute profits among manufacturers and dealers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.4
• /
• pp.851-868
• /
• 2012

After the financial crisis in 2008, the financial market still seems to be unstable with expanding the insolvency of the financial companies' real estate project financing loan in the aftermath of the lasted real estate recession. Especially after the illegal actions of people's financial institutions disclosed, while increased the anxiety of economic subjects about financial markets and weighted in the confusion of financial markets, the potential risk for the overall national economy is increasing. Thus as economic recession prolongs, the people's financial institutions having a weak profit structure and financing ability commit illegal acts in a variety of ways in order to conceal insolvent assets. Especially it is hard to find the loans of shareholder and the same borrower sharing credit risk in advance because most of them usually use a third-party's name bank account. Therefore, in order to effectively detect the fraud under other's name, it is necessary to analyze by clustering the borrowers high-related to a particular borrower through an analysis of association between the whole borrowers. In this paper, we introduce Analysis Techniques for detecting financial loan frauds in advance through an analysis of association between the whole borrowers by extending SNA(social network analysis) which is being studied by focused on sociology recently to the forensic accounting field of the financial frauds. Also this technique introduced in this pager will be very useful to regulatory authorities or law enforcement agencies at the field inspection or investigation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.422-428
• /
• 2021

This study surveyed residents and public officials for the projects to make smart-city plans of Geumsan-gun. First, domestic and foreign cases related to smart city projects were reviewed. The local status of Geumsan-gun was investigated regarding various aspects of the natural, social, urban environment, and smart-city facilities. The survey results were as follows. Overall, more than half of the survey respondents said they were satisfied with their housing quality. Several problems in their areas, such as inefficient welfare system, shortage of parking space, and industrial infrastructure, were reported. On the other hand, tourism and leisure facilities, health care support systems, industries to boost the economy, and the job market were also important issues. The problem was that the regional problems mentioned above were not in line with their preferences for smart-city services. The implications of the survey results could be summed up as follows. The groupware surveys of Geumsan-gun should be used as survey tools, whereas IT survey tools (Google, Survey Monkey, etc.) should be used for locals. In particular, a survey targeting residents should ask plain and compact questions taking advantage of local gatherings. It is also important to have a pilot-survey with relevant public officials and select related projects and regional issues. The survey of local residents and public officials is a prerequisite for promoting smart city projects. The smart city project shall reflect the needs of residents while solving community problems by considering the survey results and local conditions.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.43-52
• /
• 2022

Recently, the government has been expanding the supply of hydrogen vehicles according to the roadmap for vitalizing the hydrogen economy, but is developing safety assessment and inspection technology for the relevant vehicles. This study analyzed the prevention of hydrogen bus accidents' economic effect that arises from the application and development of large-capacity CHSS oil pressure repetition-test assessment technology, hydrogen bus internal chamber pressure transmission and emission volume inspection technology, among various technologies capable of assessing the safety of a hydrogen bus fuel system. To this end, the contingent valuation method (CVM), one of the value evaluation methods of non-market goods, was applied to investigate users' willingness to pay for each inspection technology. The survey for users' willingness to pay was conducted by attaching posters to promote surveys on the internet and within buses to the entire public. As a result of the analysis, the average WTP of the hydrogen bus internal chamber pressure transmission volume inspection technology was 25.3 KRW, the average WTP of the hydrogen bus internal chamber pressure emission volume inspection technology was 18.6 KRW, and the average WTP of the large-capacity CHSS oil pressure repetition-test assessment technology was measured at 16.7 KRW. In addition, the costs and benefits of the introduction of the relevant inspection technology were defined through the interviewing of experts at related research institutions and businesses. As a result of conducting an economic analysis (4.5% discount rate) according to the development of each inspection technology, economic feasibility was seen in all assessment and inspection technologies. As much as the technology is indispensable for the safe use of hydrogen buses, it shows that investment in related technology is very necessary in the future. However, because it was decided that the relevant analysis will differ according to the distribution rate of hydrogen buses, further analysis following this future distribution rate of hydrogen buses is needed, and future users should be made clearly aware of the safety and environmental nature of the technology.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.127-136
• /
• 2022

As manufacturing items have changed in various ways, changes in the mass production of small-scale small-scale production of multiple varieties have become commonplace. As a result, the method of the manufacturing site has also changed, and the "smart factory," which emphasizes the production efficiency aspect using automation lines and big data of factories, is in the spotlight according to the global market economy. The introduction performance of smart factories has a positive effect in terms of production efficiency and is drawing a steep upward curve. In addition to the positive aspects, the aspect that needs to be supplemented in the future is the support and cooperation of specialized smart equipment suppliers, but education on standardized smart factories and the relocation of existing manpower, education, evaluation, and creative production that robots cannot replace Various support measures are also needed for activities. In addition, continuous management and systematic education are required to enter the upper stage. Through the case of companies that have built smart factories, it is intended to emphasize the need for proper use of manpower and support management for settlement and maintenance after introduction and continuous on-the-job training through the comparison of productivity before and after introduction to ensure the effect continues.

• Journal of Family Resource Management and Policy Review
• /
• v.27 no.1
• /
• pp.13-24
• /
• 2023

The 4th industrial revolution came deep into family life and changed the way of housework and care. The change in the family caused by the technological change of the 4th industrial revolution is remarkable in terms of socialization of housework. In this study, the socialization of housework, which is accelerating in the era of the 4th industrial revolution, was examined focusing on the change in the aspect of "household service" through the "platform". Since 2015, when technological changes in the 4th industrial revolution began to decline, related newspaper articles were extracted for daily and economic newspapers nationwide and analyzed big data. The results of big data analysis show that the platform economy using the 4th industrial revolution technology is rapidly spreading the socialization of housework not only at the business level but also at the public policy level. It has been confirmed that support for household services through the platform is growing into a new business area of companies, and at the public policy level, it is being treated as an important policy task in supporting work-family balance or responding to infectious diseases. This study is meaningful in that it provided an opportunity to reflect on the roles and tasks of the family, market, and state for housework and care in the future through changes in housework and care caused by the 4th industrial revolution technology.

• Economic Analysis
• /
• v.27 no.4
• /
• pp.1-42
• /
• 2021

The outlook for Korea's consumer price inflation rate has a profound impact not only on the Bank of Korea's operation of the inflation target system but also on the overall economy, including the bond market and private consumption and investment. This study presents the prediction results of consumer price inflation in Korea for the next three years. To this end, first, model selection is performed based on the out-of-sample predictive power of autoregressive distributed lag (ADL) models, AR models, small-scale vector autoregressive (VAR) models, and large-scale VAR models. Since there are many potential predictors of inflation, a Bayesian variable selection technique was introduced for 12 macro variables, and a precise tuning process was performed to improve predictive power. In the case of the VAR model, the Minnesota prior distribution was applied to solve the dimensional curse problem. Looking at the results of long-term and short-term out-of-sample predictions for the last five years, the ADL model was generally superior to other competing models in both point and distribution prediction. As a result of forecasting through the combination of predictions from the above models, the inflation rate is expected to maintain the current level of around 2% until the second half of 2022, and is expected to drop to around 1% from the first half of 2023.

• Journal of Korea Water Resources Association
• /
• v.56 no.3
• /
• pp.225-233
• /
• 2023

Urban rivers and their surrounding environments have been altered due to factors such as rapid economic growth and urban development. This alteration have caused the rivers to lose their original value and become exposed to various pollution, resulting decrease in citizens' quality of life. This study aims to estimate citizens' Willingness To Pay (WTP) for water quality improvement in Suyeong River in Busan. To estimate the non-market value of the Suyeong River, the WTP of Busan citizens for water quality improvement was estimated, applying Contingent Valuation Method (CVM). The WTP for improving the water quality from Grade 4(polluted water) to Grade 2(game fish like bass can live in it) was estimated using the water quality ladder concept of the US Environmental Protection Agency, assuming annual donations for five years. For the CVM, the logistic distribution and Spike Model were adopted. As a result, citizens residing in the surrounding area of Suyeong River expressed a higher WTP. Considering more than half of the Busan citizens are aware of the "conservation of nature and ecosystems" as a major function of the Suyeong River, this higher WTP could serve as a basis for improving the value of urban rivers.

• Korea Trade Review
• /
• v.43 no.4
• /
• pp.155-175
• /
• 2018

This study estimates the technical efficiency and total factor productivity(TFP) of and analyzes the relationship between TFP and exports for Korean manufacturing companies from 2000 to 2016. Specially, TFP is decomposed into Technical Change(TC), Technical Efficiency Change (TEC), and Sale Effect(SE), and compared between large and small enterprises. First, in the case of technical efficiency, the Korean economy has been very vulnerable to external shocks, such as the sharp decline following the 2008 financial crisis. The efficiency of the electronics, automobile, and machinery sectors is low and needs to be improved. In addition, the technological efficiency of large enterprises is higher than that of SMEs in most manufacturing sub-sectors except for non-ferrous metals. In the case of TFP, most changes are due to TC, and the effective combination of labor, capital and the effect of scale have little effect, suggesting that improvement of internal structure is urgent. In addition, volatility due to the impact of the financial crisis in 2008 was much larger in SMEs than in large companies, so external economic impacts are more greater for SMEs than large enterprises. The relationship between TFP decomposition factors and exports shows that TC has a positive effect only on exports of SMEs. Therefore, in order to increase exports, in the case of SMEs, R&D support to promote technological development is needed. In the case of large companies, it is necessary to establish differentiated strategies for each export market, competitor company, and item to link efficiency and scale effect of exports.