• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.233-239
• /
• 2014

The accurate engine output is basically one of important factors for the analysis of engine performance. Nowadays in-cylinder pressure analyzer in internal combustion engine is also an indispensable tool for engine research and development, environment regulation and maintenance of engine. The combustion analysis is desperately needed in order to induce a correct judgment on the condition of the engine and suggest the specific ways to improvement as well as the correct engine output. And these tool is advantageous to reduce fuel consumption and maintenance of the engine. In this study, using the developed measuring kit, combustion analysis of marine generator engine which was adapted as test engine was carried out. It was verified that the good operation condition of the engine as well as contributing to fuel savings by checking and readjusting accurately the irregular combustion of the test engine were accomplished. From the results all above, it was recognized that the measuring kit by new method for engine output was developed and verified for its utilities.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.1
• /
• pp.29-39
• /
• 2013

Fishing vessels have been causing more than 70% of marine casualty in Korea. As a view of the occurring number of marine casualty, it is obvious for fishing vessel to account for the absolute high portion of that in comparison with the non-fishing vessels. That is a natural outcome because fishing vessels have occupied more than 90% of all registered Korean vessels. If we consider it not occurring number, but occurring ratio, we could find out that fishing vessels accounted for 5 times lower than non-fishing vessels in marine casualties. Nevertheless, fishing vessels have not immunity from responsibility for marine casualties at all, because the tendency of it in fishing vessel has been dominating the whole marine casualties in Korea. So for reduction of them, it is indispensable to decrease the casualties of fishing vessel. In this study, the authors tried to carry out many items of them to compare the occurring number with the occurring ratio, and dealt with the casualties of collision and machine damage in detail, because those have not only been occurring most frequently in casualties in Korea, but also led to the death and injury of lives. To reduce the collision and the machine damage, the operator have to keep the watch more strictly and check and keep the machine in good order. And it is necessary for the operator to take more education and training intended to decrease those systematically and continuously, especially for the crews of fishing vessels.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.413-422
• /
• 2017

The objective of this study was to prove possible effects of a habitable place for fish around semi-submersible drilling rig which measured underwater radiated noise, irradiance distribution of rig's light and conducted experimental fishing in Malaysia territory and observed for distribution of fishes around the rig by ROV during drilling operation in the East Sea of Korea. As a result underwater radiated noise was $130dB/{\mu}Pa$ from 156.25 to 187.50 Hz, irradiance distribution of light was between 21.5 and 43.1 lx. Despite this result, underwater radiated noise was not a threat to fish around rig and low irradiance distribution of light also played a role in the luring influence of the fishes at night. Fish showed up in the beginning of drilling operation and at the end of drilling operation. However, there are few fish in the midst of drilling operation. The main reason for this result was the destruction of the habitable place due to blow out mud and broken pieces of ground formation in drilling hole. The results are expected to contribute to reasonable fishery management around rig.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.347-354
• /
• 2007

This paper describes on the real-time monitoring of net setting and hauling process for fishing operations of Danish seine vessels in the southern waters of Korea as an application of a PC based ECDIS system. Tracking of fishing process was performed for the large scale Danish seine vessel of G/T 90 and 350 PS class using the fishing gear which the length of net, ground rope, head rope and sweep line including warp in both sides were 86m, 104m, 118m and 3,200m, respectively. Tracking information for net setting and hauling process was continuously recorded for 23 fishing operations performed on November and December, 2003. All measurement data, such as trawl position, heading, towing course and past track which was individually time stamped during data acquisition, was processed in real time on the ECDIS and displayed simultaneously on the ENC chart. The results indicated that after the separation of a marker buoy from Danish seiner, the averaged running speed of vessel and the averaged setting period while shooting the seine on the course of diamond shape to surround the fish school in the 23 fishing operations were 8.3 knots and 13.1 minutes, respectively. And with the maker buoy taken on board, the averaged running speed of vessel and the averaged towing period while closing the seine on the straight route was 1.0 knots and 47.0 minutes, respectively. After the closing stage of hand rope, the hand rope was towed by the averaged speed of 2.2 knots during the 13.0 minutes. The average area for route of diamond shape swept by sweep lines of the seine in 23 fishing grounds was $709,951.6m^2$. Further investigation is also planed to provide more quantitative tracking information and to achieve more effective surveillance and control of Danish seine vessels in EEZ fishing grounds.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.163-171
• /
• 2020

Engaged in trawling in limited fishing grounds with a number of fish schools could cause collisions between fishing vessels. Therefore, providing accurate maneuver information according to the situation could be regarded as essential for improving seafarers safety and fishing efficiency as well as safety of navigation. It is difficult to obtain all maneuver information through sea trial tests only, so a method through empirical formula is necessary. Since most empirical formulas are developed for merchant ship types, especially the characteristics of hull shape parameter like C_bB/L and dC_b/B etc. are clearly different between fishing vessels and merchant ships, this could occur estimation errors. Therefore, in this study, the authors have selected target fishing vessels and merchant ships and analyzed the characteristics of hull shape parameter according to the ship types. Based on this analysis, the empirical formula developed for the merchant ship type has applied to the target fishing vessels; it has verified through the turning motion simulation that the estimation error could be generated. In conclusion, it is necessary to include the characteristics of the hull shape parameter of fishing vessels in the empirical formula in order to apply the empirical formula has developed for merchant ship types to fishing vessel types.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.155-162
• /
• 2020

The adjudication of Korean Maritime Safety Tribunal (KMST) was analyzed to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) in stow net fishing vessel from 2015 to 2019. The personnel's carelessness was the most common in 29 out of 33 accidents (87.9%), followed by 25 cases (75.8%) of inadequacy of instructions, 24 cases (72.7%) of inadequacy of education on hazard factor, 20 cases (60.6%) of no personal protection equipment, 18 cases (54.5%) of poor guard, 17 cases (51.5%) of inadequacy of work method, 16 cases (48.5%) of absence of emergency stop button, 14 cases (42.4%) of work practice of poor safety precautions that affected more than 40% of all accidents as accident causes. These causes had a strong influence on each other, and the ratio of accident causes is high. With this relationship, accidents can be prevented or the severity of human injury can be reduced if types of accident process can be estimated with a scenario, and the key points before the accident in the scenario are switched to safe points.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.399-404
• /
• 2015

The cost of fuel in ships has recently increased due to a rapid increase in international oil prices and international restrictions regarding the greenhouse effect generated from the burning of fuel. Therefore, different methods for changing the hull designs for improving energy efficiency, developing coating for reducing friction resistances, developing additives for improving engine thermal efficiency, and low-speed operation for reducing fuel consumption have been considered. The developments of high-speed, large-scale, and energy-saving vessels are deemed essential to adapt to the recent high oil price era. Therefore, it is important to analyze Precisely the qualitative and quantitative changes in the resistance value of the local areas of the hull surface. In this study, the engine performance before and after docking was analyzed to examine friction resistance caused by marine growth on the hull as a basic study for improving the energy efficiency. The result was then presented by comparing it with the previous data for 2.5 years between docks to investigate the performance of the main engine, the change in friction resistances and loads, the fuel consumption and ship speed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.236-241
• /
• 2013

It requires long time and high cost for an apprentice engineer to reach the level of getting various experiences of engine space machinery and preparing for emergency situations. Therefore reducing the time and cost, several types of simulator that give the very similar surroundings to the ship engine room, relevant to STCW-95 are used for systematic education and training to get many experiences and good judgement in emergency. Since most simulators that are operated in Korea were imported from foreign countries, it is difficult to directly implant the amendments of STCW Convention and reflect International Maritime Organization (IMO) model courses. This study describe a development of marine auxiliary boiler simulator that makes the apprentice engineer easier to understand the relationship between equipments in steam system such as auxiliary boiler, exhaust gas boiler, and steam turbine.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.533-540
• /
• 2013

Prime movers in engine rooms inherently are much affected by the adjustment of their governors for the steady state and transient properties, consequently requiring that marine engineers shall be well familiar with the way to manage governor dials for normal operation. The hydro-mechanical governors basically have different control characteristics and adjustment parameters of stability from digital governors. The former include compensation mechanism using dash pot while the control algorithm of the latter is usually based on the PID action. This study is for configuring a simulation module to let trainees practice how to adjust dials for stability on hydraulic governors in the view that the practice by real governors and engines is time consuming and high cost for operation. The governor module includes the adjusting points such as speed set, speed droop, needle valve and compensation pointer with engine module of $2^{nd}$ order coupled. The results of simulation showed satisfactory responses as a training tool for the adjustment of control parameters.

• Journal of Fisheries and Marine Sciences Education
• /
• v.22 no.2
• /
• pp.218-230
• /
• 2010

This study was conducted to determine the effect of the noise level on the boarding environment in a stern trawl ship, KAYA(GT: 1,737 tons, Pukyong National University). We measured the noise level at a working, an accommodation and a teaching area, and an engine space on January 9, 2010 while the KAYA was sailing on a liner sea route. At the working area, the ranges of the noise rating number(NRN) and the NRN determination frequency(FNRN) were from 44 to 73 and from 1000 to 2000Hz, respectively. The results were generally satisfied the criteria of the International Maritime Organization(IMO). The noise level at the area, except the radio room(w2), was exceeded the criteria(50dB(A)) for the efficient studying and working. The noise level at the engine control room and the machine workshop was respectively exceeded 1.2dB and 9.5dB than the criteria caused the conversation disturbance (70dB(A)). At the accommodation, NRN and FNRN were from 49 to 54 and from 1000 to 4000Hz, respectively. The noise level was below the criteria of IMO, but above 40dB(A) caused the sleep disturbance. At the teaching area, NRN and FNRN were from 44 to 63 and from 500 to 2000Hz, respectively. The noise level was exceeded than the criteria(50dB(A)) for the efficient studying. At the engine space, NRN and FNRN were from 95 to 100 and from 2000 to 4000Hz, respectively. The noise level was above the criteria of IMO(90dB(A)) for the residence, while it was not exceeded 110dB(A) for the transient.