• 해양환경안전학회지
• /
• 제22권3호
• /
• pp.296-303
• /
• 2016

In this paper, a numerical experiment on a tidal turbine was performed based on a water wheel design using the commercial CFD code ANSYS-CFX to contribute to the development of water wheels. The water wheel type tidal turbine was studied with different numbers of rotor blades (including ten, twelve and twenty blades types) and with different blade shapes (Straight, Curved and Zuppinger types) for comparison at several values of tip speed ratio (TSR) ranging from 0.7 to 1.2. The numerical results indicated that the 10-bladed type and the Straight-bladed type turbines absorb the highest power efficiency, up to 43 % at TSR 0.9. In addition, the 20-bladed and the Curved-bladed types showed the lowest performances in all cases of TSRs comparing with the others. Besides that, it was found that this turbine operates much effectively at low range of TSR, especially at TSRs 0.9 and 1 for all cases of blade shapes and all numbers of blades.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.75-78
• /
• 2001

Recently, the HFPD measurement testing is widely used in partial discharge measurement of HV machines because HFPD measurement testing receives less influence of external noise and has a merit of good sensitivity. Also HFPD testing is able to offer the judgement standard of degradation level of HV machine and can detect discharge signals in live-line. Therefore it is very useful method compare to previous conventional PD testing method and effective diagnosis method in power transformer that requires live-line diagnosis. But partial discharges have very complex characteristics of discharge pattern so it is required continuous research to development of precise analysis method. In recent, the study of partial discharge is carrying out discover of initial defect of power equipment through condition diagnosis and system development of degradation diagnosis using HFPD(High Frequency Partial Discharge) detection. In this study, simulated transformer is manufactured and HFPD occurred from transformer is measured with broad band antenna in real time, the degradation grade of transformer is analyzed through produced patterns in simulated transformer according to applied voltages.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.229-235
• /
• 2012

This paper dealt with the fabrication of a partial discharge (PD) analyzer for insulation diagnosis of power facilities like transformers, cables and gas-insulated switchgears. An analytic algorithm for the phase (${\phi}$), the magnitude (q), and the pulse count (n) of PD pulse was designed and a time-frequency (TF) map algorithm was applied in the system to eliminate noises by analyzing the time and the frequency component of signals. All the algorithms were operated by a LabView graphical program. The detection circuit consists of a coupling capacitor, a detection impedance, and a low noise amplifier. A plane-plane and a point-plane electrode system were fabricated to simulate different types of insulation defects. In the experiment, we could easily understand the characteristics of PD pulses using the prototype PD analyzer.

• 한국유체기계학회 논문집
• /
• 제18권3호
• /
• pp.53-59
• /
• 2015

Tidal turbine, which is relatively similar to wind turbine in term of operational principle, has become a potential solution for the sustainable development of global energy. This paper introduces author's work on tidal turbine which aims to improve the power efficiency by the adaption of counter-rotating concept. The turbine system is modelled and analyzed using computational simulation commercial code. Compared with other works, the counter-rotating tidal turbine presented here is expected to operate stably with high performance throughout a wide range of tip-speed-ratio. Moreover, the equability of individual performance of each rotor is an advantage.

• 대한조선학회논문집
• /
• 제44권6호
• /
• pp.657-665
• /
• 2007

The object of this paper is to describe the ubiquitous computing technologies for ship, which is produced and assembled by many steel blocks. It includes the testing of a 2.4GHz wireless communications platforms and radio-frequency identification technology with the blocks disturbing the wireless communication. The power line communication that is established in a ship already is also experimented for some data transfer. Also, possible application areas of the ubiquitous computing technology to ships are discussed. At last, the test bed copied from an actual vessel was installed and data acquisition tests were established using wire and wireless communication. In this paper, we implemented some ubiquitous computing technologies in the test bed simulating a ship environment and investigated the basic characteristics of ubiquitous computing technologies.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.187-190
• /
• 2001

새로운 패러다임의 전환점에서 세계 각 국가는 시대적 당면 문제에 대한 해결 방안을 육지에서 찾기보다는 해양에서 찾으려는 노력을 더욱 경주되고 있다. 특히 우리 나라는 삼면이 바다로 둘러싸인 해양국가로서 해양의 중요성은 그 어느 나라보다도 큰 비중을 차지하고 있다. 해양강국 실현을 위해서는 해양GIS에 기반한 디지털 해양공간을 창조하는 것이 필수적이다. 본 계획은 우리 나라가 체계적이고 효율적인 해양GIS 인프라 구축을 위하여 국내·외 해양CIS 관련 현황과 법·계획을 분석하고, 해양GIS 기본 개념 정립을 통하여 해양GIS 구축 이념과 체계, 전략을 수립하는데 있다.

• Corrosion Science and Technology
• /
• 제10권5호
• /
• pp.167-174
• /
• 2011

Due to commercialization of nuclear power, most countries have taken interest in decontamination process of nuclear power plant and tried to develop a optimum process. Because open literature of the decontamination process are rare, it is hard to obtain skills on decontamination of foreign country and it is necessarily to develop proper chemical decontamination process system in Korea. In this study, applicable possibility in chemical decontamination for reactor coolant pump (RCP) was investigated for the various stainless steels. The stainless steel (STS) 304 showed the best electrochemical properties for corrosion resistance and the lowest weight loss ratio in chemical decontamination process with immersion type than other materials. However, the pitting corrosion was generated in both STS 415 and STS 431 with the increasing numbers of cycle. The intergranular corrosion in STS 431 was sporadically observed. The sizes of their pitting corrosion also increased with increasing cycle numbers.

• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.754-758
• /
• 2017

본 논문에서는 선박의 안전운항을 위하여 안개 발생 시 엔진을 자동으로 제어하여 피해를 최소화하거나 회피할 수 있도록 자동 제어 시스템을 설계 및 제작 하였다. 제작된 동력 자동제어시스템은 ATmega128과 RPM감지회로를 사용하여 안개발생부에서 인위적으로 안개를 발생시켜 RPM의 변화량을 측정하였다. 이를 위하여 전체구성도를 작성하였으며 홀센서가 있는 모터를 사용하여 PWM 제어를 하도록 ATmega128에 Source code를 적용시켰다. 추후, 제작된 동력 자동제어장치를 통하여 실제 선박에서의 실험 및 안전성평가를 마련할 계획이다.

• Corrosion Science and Technology
• /
• 제17권6호
• /
• pp.272-278
• /
• 2018

Reinforced concrete (RC) has been used as a construction material in various environments, such as airports, bridges, and ocean concrete structures, etc. Over time, however, rebar in the concrete is prone to corrosion from environmental forces and structural defects of the concrete. Cathodic protection (CP) was invented to prevent problems with corrosion and is widely used for different applications. Cathodic protection is divided into two types: sacrificial anode cathodic protection (SACP) and impressed current cathodic protection (ICCP). There are several limitations to the use of sacrificial anode cathodic protection in complex reinforced concrete structures, including concrete resistivity, throwing power of the CP, and environmental conditions. These limitations can affect the protection performance of SACP. Therefore, we used impressed current cathodic protection in our study. We tested Ti-Mesh, Ti-Rod, and Ti-Ribbon anodes in slab type reinforced concrete specimens. Electrochemical tests were conducted to confirm the impressed current cathodic protection performance under different environmental conditions.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.133-133
• /
• 2018