• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.1
• /
• pp.121-129
• /
• 2022

With the recent increase in international trade volume the trade volume through ships is also continuously increasing. The treatment of ballast water goes through the following five steps, samples are taken and analyzed at each step, and samples are obtained using a suction pump. These suction pumps have low efficiency and thus need to be improved. In this study, it is to optimize the form of the impeller which affects directly improvements of performance to determine the capacity of suction pump and to fulfill the purpose of this research. To do it, we have carried out parametric design as an input variable, geometric form for the impeller. By conducting the flow analysis for the optimum form, it has confirmed the value of improved results and achieved the purpose to study in this paper. It has selected the necessary parameter for optimizing the form of the pump impeller and analyzed the property using experiment design. And it can reduce the factor of parameter for local optimization from findings to analyze the property of form parameter. To perform MOGA(Multi-Objective Genetic Algorithm) it has generated response surface using parameters for local optimization and conducts the optimization using multi-objective genetic algorithm. with created experiment cases, it has performed the computational fluid dynamics with model applying the optimized impeller form and checked that the capacity of the pump was improved. It could verify the validity concerning the improvement of pump efficiency, via optimization of pump impeller form which is suggested in this study.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1349-1354
• /
• 2021

An All-in-one LED lantern is a light device to determine the fairway of ships in operation. The current all-in-one LED lantern powered by solar energy is challenged by insufficient power capacity due to limited sun hours. This article presents an all-in-one 9-Nautical mile LED lantern driven by solar and wind power that is abundant maritime renewable energy. Furthermore, the remote smart monitoring system is developed. A smart control system capable of remote control of the lantern was implemented by using the LED lantern device and monitoring system as IoT. This technology that realtime condition monitoring and remote control are developed for safe ship navigation. We expect that maintaining the accuracy and consistency of LED lanterns prevents marine accidents and reduces social costs.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.1
• /
• pp.37-43
• /
• 2022

Drones, one of the 4th industrial technologies that are expanding from military use to industrial use, are being actively used in the search missions of the National Police Agency and finding missing persons, thereby reducing interest in a wide area and the input of large-scale search personnel. However, legal review of police drone operation is continuously required, and the importance of advanced system for related operations and analysis of captured images in connection with search techniques is increasing at the same time. In this study, in order to facilitate recording, preservation, and monitoring in the concept of precise search and monitoring, it is possible to achieve high efficiency and secure golden time when precise search is performed by constructing spatial information based on photo rather than image data-based search. Therefore, we intend to propose a spatial information construction technique that reduces the resulting data volume by adjusting the unnecessary spatial information completion rate according to the size of the subject. Through this, the scope of use of drone search missions for large-scale areas is advanced and it is intended to be used as basic data for building a drone operation manual for police searches.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.4
• /
• pp.192-199
• /
• 2022

With the advent of autonomous ships, it is emerging as one of the very important issues not only to operate with a minimum crew or unmanned ships, but also to secure the safety of ships to prevent marine accidents. On-site inspection of the hull is mainly performed by the inspector's visual inspection, and video information is recorded using a small camera if necessary. However, due to the shortage of inspection personnel, time and space constraints, and the pandemic situation, the necessity of introducing an automated inspection system using artificial intelligence and remote inspection is becoming more important. Furthermore, research on hardware and software that enables the automated inspection system to operate normally even under the harsh environmental conditions of a ship is absolutely necessary. For automated inspection systems, it is important to review artificial intelligence technologies and equipment that can perform a variety of hull failure detection and classification. To address this, it is important to classify the hull failure. Based on various guidelines and expert opinions, we divided them into 6 types(Crack, Corrosion, Pitting, Deformation, Indent, Others). It was decided to apply object detection technology to cracks of hull failure. After that, YOLOv5 was decided as an artificial intelligence model suitable for survey and a common hull crack dataset was trained. Based on the performance results, it aims to present the possibility of applying artificial intelligence in the field by determining and testing the equipment required for survey.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1603-1611
• /
• 2021

As IMO environmental regulations are tightened, the need to establish a system that can reduce emissions is increasing, and for this purpose, various power control management systems have been studied and implemented as a new energy management system for ships. In this study, we design a control process through modeling for Bi-Directional Converter (BDC) application with bi-directional power flow to link batteries, which are energy storage devices, to conventional generator power systems, and propose mechanisms for batteries optimized for varying loads. This work models MATLAB/Simulink as a BDC and simulates current control and state of charge (SOC) optimization at the time of charging and discharging batteries according to load scenarios. Through this, the battery, power, and load were interlocked so that the generator operated on board could be operated in the optimal operation range, and power control management was performed to enable the generator to operate in the high fuel efficiency range.

• Ocean and Polar Research
• /
• v.45 no.2
• /
• pp.43-55
• /
• 2023

This study was conducted to understand the seasonal patterns and variation of the copepod community in the Anma Islands of Yeonggwang, Yellow Sea, with a focus on seasonal surveys to assess the factors affecting their occurrence. Throughout the survey period, Acartia hongi, Paracalanus parvus s. l., and Ditrichocorycaeus affinis were dominant species, while Acartia ohtsukai, Acartia pacifica, Bestiolina coreana, Centropages abdominalis, Labidocera rotunda, Paracalanus sp., Tortanus derjugini, Tortanus forcipatus occurred differently by season and station. As a results of cluster analysis, the copepod communities were distinguished into three distinct groups: spring-winter, summer, and autumn. The results of this study showed that the occurrence patterns of copepod species can vary depending on environmental conditions (topographic, distance from the inshore, etc.), and their spatial occurrence patterns between seasons were controlled by water temperature and prey conditions. One of the physical mechanisms that can affect the distribution of zooplankton in the Yellow Sea is the behavior of the Yellow Sea Bottom Cold Water (YSBCW), which shows remarkable seasonal fluctuations. More detailed further studies are needed for clear grounds for mainly why to many Calanus sinicus in the central region of the Yellow Sea are seasonally moving to the inshore, what strategies to seasonally maintain the population, and support the possibilities of complex factors.

• Journal of Platform Technology
• /
• v.11 no.4
• /
• pp.62-70
• /
• 2023

This research is one of a series of studies to develop a system to help agricultural producers and sellers determine when and how much to ship products to the wholesale market to maximize their profit. The purpose of this research is to incorporate the time-varying quality change effect, which was not used in the previous agricultural and marine product shipping model. The researchers developed four models to measure the quality change effect: quality declining steadily over time, quality declining rapidly at first and then slowly, quality declining first slowly and then rapidly, and quality rising over time and then decreasing again. According to the results of an empirical analysis of the effect of each model's quality change effect on shipments for apples traded in the Garak Wholesale Market from 2014 to 2021, statistical significance was found in the quality change effect of all four models. And there was no significant difference in explanatory power between the four models. Therefore, any of the four models should be introduced into the decision-making system for shipping time for apples.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.609-612
• /
• 2011

국내 해양 환경에 대한 조사 및 분석 연구는 미흡한 편에 있다. 최근 세계적으로 바다가 자원의 보고로 주목 받으면서 해양 모니터링 기술에 대한 연구가 활발히 진행 되고 있다. 특히 해양 환경을 분석하고 이해하기 위해서는 지속적으로 해양 환경 자료를 수집해야 하나 아직 많은 부분에서 제약 사항으로 남아 있다. 자동화된 해양 환경 자료의 수집과 수집된 자료를 분석하여서 해양재해를 예측하면 기름 유출에 의한 해양오염의 피해, 적조에 의한 수산업의 피해, 해양환경 이변에 의한 수산업 및 재해 피해를 최소화하는데 기여할 수 있다. 본 논문은 해양환경 감시 및 분석 시스템의 모델을 제안한다. 제안 시스템은 해양환경 정보를 자동 수집하여 해양환경을 지능적으로 감시한다. 또한 수집된 해양 자료를 분석하여서 해양 재해를 예측한다.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.13-22
• /
• 2023

As an alternative to environmental pollution generated from fossil fuels currently in use, research is being actively conducted to use hydrogen that does not cause air pollution. As fire and explosion accidents caused by hydrogen leakage have occurred until recently, research on safety is needed to commercialize hydrogen on ships, which are special environments. In this study, a seasonal alternative scenario for each season and the worst scenario were assumed in the event of a leakage accident while a hydrogen fuel cell propulsion ship equipped with a hydrogen storage tank was navigating at JangSaengPo port in Ulsan. In order to consider environmental variables, the damage impact range was derived through ALOHA and probit analysis based on the annual average weather data for 2021 by the Korea Meteorological Administration and on geographic information data from the National Statistical Office. Radiation showed a wider damage range than that of Overpressure and Flame in both the alternative and worst-case scenarios, and as a result of probit analysis, a fatality rate of 99% was confirmed in all areas.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.508-510
• /
• 2021

As the international standardization of 5G element technologies (e.g., 5G vertical satellite, direct communication functions between 5G NR (New Radio)-based devices) required not only in 5G verticals but also in autonomous navigation services is currently underway, it is expected to be utilized for autonomous navigation services while utilizing the economic size advantages of the scale of international standard-based solutions through 3GPP international standardization of marine communication services related to autonomous navigation vessels. In order to establish the ecosystem of ICT convergence market related to autonomous navigation vessels and to preoccupy core communication technology based on international standards, it is necessary to develop digital communication systems and gateways that have global compatibility, (2) secure core element technology based on next generation communication, and (3) promote international standardization for internationalization of related technologies. For this, data analysis and standard technology should be developed through service analysis by distance. Currently, the requirements for the operation of autonomous navigation vessels can be classified into three categories.