• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.25-37
• /
• 2022

In this paper, a small-scale model testing system was developed using a series of small-scale model tests to analyze the mechanism of compaction pile formation and evaluate the quality of controlled grading aggregates proposed as an alternative material to the sand compaction pile (SCP) method and granular compaction pile (GCP). These are the most typical ground improvement methods in field practice, particularly for soft grounds. However, the SCP has faced difficulties due to the supply shortage of natural sand and the corresponding price surge of sand. The GCP is limited in marine soft grounds because of the failure occurring at the pile tip caused by excessive expansion of the deeper bulbs, leading to uneven bulb formation. The uniformity of compacted pile bulbs is critical to ensuring the bearing capacity and quality of the compaction pile. This study aims to evaluate the performance of the new material and controlled grading aggregates using small-scale model tests simulating field compaction process to investigate its potential application in comparison with SCP. The compaction piles are examined in four cases according to different materials used for compaction pile and clay strength. The compaction pile materials, which are made of sand and controlled grading aggregates, used in this study were compared to reveal the mechanism of the bulb creation. The experimental data confirm that the bulb formation quality of the traditional sand and the new material, controlled grading aggregates are comparable. The compaction pile made of controlled grading aggregates presents higher bearing capacity than that of marine sand.

• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.397-406
• /
• 2012

During the 2nd Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) in 2010, gas-hydrate-bearing sediment cores were recovered at 10 drill sites. Base, on Infrared (IR) thermal image and grain-size analysis of the cores, three distinct types of gas hydrate are classified: Type I (fracture-filling in mud layers), Type II (disseminated in mud layers), and Type III (pore-filling in sand layers). Types I and II gas hydrates occur in mud as discrete veins, nodules or disseminated particles. Type III fills the pore spaces of the sand layers encased in mud layers. In this case, the sand content of hosting sediments shows a general linear relationship with gas hydrate saturation. The degrees of temperature anomalies (${\Delta}T$) from IR images generally increase with gas hydrate saturation regardless of gas hydrate occurrence types. Type I is dominantly found in the sites where seismic profiles delineate chimney structures, whereas Type II where the drill cores are composed almost of mud layers. Type III was mainly recovered from the sites where hemipelagic muds are frequently intercalated with turbidite sand layers. Our results indicate that gas hydrate occurrence is closely related to sedimentological characteristic of gas hydrate-bearing sediments, that is, grain size distribution.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.3
• /
• pp.135-143
• /
• 2016

We investigated the effectiveness of natural zeolite (NZ) and sand (SD) as a capping material to block the release of heavy metals (Cd, Cr, Cu, and Zn) from heavily contaminated marine sediments and stabilize these heavy metals in the sediments. The efficiency of NZ and SD for blocking trace metals was evaluated in a flat flow tank attached with an impeller to generate wave. 0, 10, 30, and 50 mm depth of NZ or SD were capped on the contaminated marine sediments and the metal concentration in seawater was monitored. After completion of flow tank experiments, sequential extractions of the metals in the sediment below the capping material were performed. The difference of pH, EC, and DO concentration between uncapped and capped condition was not significant. The release of cations including Cd, Cu, and Zn were effectively blocked by NZ and SD capping but the interruption of Cr release was observed only in 50 mm depth of SD capped condition. However, the stabilization of Cr in 50 mm depth of SD capped condition was not achieved when compared to uncapped condition. NZ and SD capping were effective for stabilizing Cd, Cu, and Zn in marine sediments. It is concluded that the use of NZ with SD as a capping material is recommended for blocking Cd, Cr, Cu, and Zn release and stabilizing them in contaminated marine sediments.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.225-225
• /
• 2011

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.233-233
• /
• 2017

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.349-356
• /
• 2010

Analysis of high-resolution seismic profiles acquired from the southeastern continental shelf of Korea reveals that the late Quaternary transgressive deposits consist of six seismic units created in response to sea-level rise. These units with different seismic facies and geometry can be grouped into two distinct depositional wedges (paralic and marine) bounded by a ravinement surface. The paralic component underlying the ravinement surface consists of the sediment preserved from shoreface erosion and contains incised-channel fill, ancient beach-shoreface deposit and estuarine deposit. The top of paralic unit is truncated by a ravinement surface and overlain by marine component. The marine component consists of the sediment produced through shoreface erosion during landward transgression and contains mid-shelf sand sheet, mid-shelf sand ridge and inner shelf sand sheet. Such transgressive stratigraphic architecture of six sedimentary units is controlled by a function of lateral changes in the balance among rates of relative sea-level rise, sediment input and marine processes at any given time.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.704-715
• /
• 2012

To examine temporal and spatial variation in salinity and nutrients in the shallow pore water of intertidal sandflats, we measured salinity and nutrient concentrations (dissolved inorganic nitrogen [DIN], phosphorus [DIP], and silicate [DSi]) in pore water of the intertidal zone along the coastline of Jeju Island at two and/or three month intervals from May 2009 to December 2010. Geochemical parameters (grain size, ignition loss [IL], chemical oxygen demand [COD], and acid volatile sulfur [AVS]) in sediment were also investigated. The surface sediments in intertidal sandflats of Jeju Island were mainly composed of sand, slightly gravelly sand and gravelly sand, with a range of mean grain size from 0.5 to 2.5 ${\O}$. Concentrations of IL and COD in sediment were higher along the eastern coast, as compared to the western coast, due to differences in biogenic sediment composition. Salinity and nutrient concentrations in pore water were markedly different across time and space during rainy seasons, whereas concentrations were temporally and spatially more stable during dry seasons. These results suggest that salinity and nutrient concentrations in pore water depend on the advective flow of fresh groundwater. We also observed an imbalance of the DIN/DIP ratio in pore water due to the influence of contaminated sources of DIN. In particular, nutrient concentrations during rainy and dry seasons were characterized by high DIN/DIP ratios (mean-127) and low DIN/DIP ratios (mean-10), respectively, relative to the Redfield ratio (16) in offshore seawater. Such an imbalance of DIN/DIP ratios in pore water can affect the coastal ecosystem and appears to cause outbreaks of benthic seaweed along the coastline of Jeju Island.

• Ocean and Polar Research
• /
• v.40 no.2
• /
• pp.69-75
• /
• 2018

We investigated the effects of environmental variations on the growth and survival rate of Stichopus japonicus to determine the optimum environmental conditions for its growth. Literature studies and a 12 month-long diver survey were carried out to understand the habitat, ecology and size of the surveyed area. Based on the collected data, we suggested optimum habitat conditions for releasing S. japonicus. Experiments on releasing S. japonicus were conducted in the breakwater of the Hwagye fishing cooperative in Hwagey-ri, Namhae-un, Gyeongsangnam-do, Korea. To implement the experiments, we divided the surveyed area into 4 sub-areas with different characteristics: (1) sand and silt zone; (2) artificial sea cucumber bank zone; (3) artificial rock bank zone; and (4) marine algae zone. The experiment lasted for 12 months. We released 32,000 sea cucumbers over $120m^2$ of each of the sand and silt zone, artificial rock bank zone and marine algae zone and released 6,000 sea cucumbers over $120m^2$ of the artificial sea cucumber bank zone. The average density of the released sea cucumbers from day 30 to day 360 after the releasing was conducted was the highest in the artificial sea cucumber bank zone ($23.7animal/m^2$), which was followed by artificial rock bank zone ($2.0animal/m^2$), marine algae zone ($1.9animal/m^2$) and sand and silt zone ($0.8animal/m^2$). The analysis on growth showed that the initial average weight of 2.3 g increased on day 360 after the releasing to 12.5 g in the artificial sea cucumber rank zone, 20.2 g in the sand and silt zone, 23.3 g in the artificial rock bank zone and 22.9 g in the marine algae zone. Results from the experiment along with the literature analysis suggest the following optimum habitat conditions: $10-15^{\circ}C$ water temperature; 28-34 psu salinity; 5-10 m water depth; 0.2-0.5 m/s velocity; rock, stone and muddy sand as substrate; and less than 20% mud in the substrate.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.4
• /
• pp.246-253
• /
• 2011

In this study, we investigated the effect of freshwater discharge on benthic community in Nakdong estuaries. The sediment was dominated by sand except few channels where heterogenetic sediment composition was observed. Sediment composition was rarely affected by freshwater discharge during the rainy season; however, organic content in the sediment slightly increased after the rainy season. Macrobenthic species composition differed spatially. For instance, species composition decreased after the rainy season near the barrage. Benthic community analysis revealed three groups, in which the first group was found between barrage and sand bars located at the mouth of estuary, the second group was observed outside the sand bars, and the last group was found in the channel. Opportunistic benthic species indicative of organic pollution, such as Sinocorophium sinensis, Magelona japonica, and Heteromastus filiformis, dominated areas close to the barrage. Organic pollution by freshwater discharge appears to be responsible for the emergence of opportunistic benthic species, and this influenced areas from the mouth of bay to sand bars. Outside the sand bars, freshwater discharge did not seem to have affected species composition.

• The Korean Journal of Malacology
• /
• v.23 no.1
• /
• pp.9-16
• /
• 2007

Data obtained from field observation revealed that the degree of shell bioerosion of the scallop, Patinopecten (Mizuhopecten) yessoensis, by endolithic organisms significantly higher on the muddy sand than on the sand. At the area studied, the polychaete worm, Polydora brevipalpa (=Polydora ciliata brevipalpa, Polydora ciliata Okuda, Not Johnston, Polydora variegata), which is common symbiotic species for the scallop made 95-100% of total scallop shell bioerosion at the area studied. The muddy bottom sediments enriched by organic matter create favourable conditions for development of microphytobenthos and bacteria, which are predominantly consumed by P. brevipalpa. Linear regressions for the degree of shell bioerosion on the scallop shell height, total wet weight and adductor muscle wet weight revealed negative relationships between them for the scallops inhabiting both sand and muddy sand. The influence of polychaetes on scallops is complex. They may be food competitors. Polychaete can directly affect the host through their boreholes. Scallop expends energy for shell regeneration to prevent the polychaete penetration into its interior cavity. It was found that the degree of shell bioerosion increased considerably with scallop age.