• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1738-1748
• /
• 2019

Previous research has shown that the inclined condition has an impact on the natural circulation (natural circulation) mode operation of Floating Nuclear Power Plant (FNPP) mounted on the movable marine platform. Due to its compact structure, small volume, strong maneuverability, the Integral Pressurized Water Reactor (IPWR) is adopted as marine reactor in general. The OTSGs of IPWR are symmetrically arranged in the annular region between the reactor vessel and core support barrel in this paper. Therefore, many parallel natural circulation loops are built between the core and the OTSGs primary side when the main pump is stopped. and the inclined condition would lead to discrepancies of the natural circulation drive head among the OTSGs in different locations. In addition, the flow rate and temperature nonuniform distribution of the core caused by inclined condition are coupled with the thermal hydraulics parameters maldistribution caused by OTSG group operating mode on low power operation. By means of the RELAP5 codes were modified by adding module calculating the effect of inclined, heaving and rolling condition, the simulation model of IPWR in inclined condition was built. Using the models developed, the influences on natural circulation operation by inclined angle and OTSG position, the transitions between forced circulation (forced circulation) and natural circulation and the effect on natural circulation operation by different OTSG grouping situations in inclined condition were analyzed. It was observed that a larger inclined angle results the temperature of the core outlet is too high and the OTSG superheat steam is insufficient in natural circulation mode operation. In general, the inclined angle is smaller unless the hull is destroyed seriously or the platform overturn in the ocean. In consequence, the results indicated that the IPWR in the movable marine platform in natural circulation mode operation is safety. Selecting an appropriate average temperature setting value or operating the uplifted OTSG group individually is able to reduce the influence on natural circulation flow of IPWR by inclined condition.

• Journal of Navigation and Port Research
• /
• v.30 no.9
• /
• pp.735-740
• /
• 2006

Marine officers should have crisis control ability because ship operation needs not only highly specialized information, but also functional capability due to the fact that there always exist dangers at sea, which are different from those at shore. Therefore, marine officers should be trained on the related specialized information under the systematical educational system including shipboard training. Their training is also based on the strong spiritual power and physical strength through the strict training process. In order to have these vocational personalities, dormitory life training and shipboard training courses seem to be essential processes, which are required of maritime education. The introduction of automatic system into the ship as a result of the recent development of technology brings decrease of the full number of crew. Consequently, marine officers are increasingly under heavy burden, and should have more ship operation capabilities than before. Maine officers should have not only specialized information which differs from that at shore, but also vocational adaptability which can reasonably tackle with all the problems which exist on the spot and are obstacles to individual, spiritual, physical, natural, and social demands. So it is required that marine officers should have study many areas to deal with as extra curricula besides their major field of study, which are unique characteristics of the education for them. These vocational adaptabilities are based on the spiritual characteristics, such as self-developmental education, responsibility, meticulous care, attentiveness, voluntary, planning, readiness, spontaneity, accuracy, self-denial, obedience, leadership, and etc.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.4
• /
• pp.198-210
• /
• 2015

This paper presents the damage assessment of a free-fall dropped object on the seabed. The damage to a dropped object totally depends on the relationship between the impact energy and the soil strength at the mudline. In this study, unexpected dropping scenarios were first assumed by varying the relevant range of the impact velocity, structure geometry at the moment of impact, and soil strength profile along the penetration depth. Theoretical damage assessments were then undertaken for a free-fall dropping event with a fixed final embedment depth for the structure. This paper also describes the results of a three-dimensional large deformation finite element analysis undertaken for the purpose of validation. The analyses were carried out using the coupled Eulerian-Lagrangian approach, modifying the simple elastic-perfectly plastic Tresca soil model. The validation exercises for each dropping scenario showed good agreement, and the present numerical approach was capable of predicting the behavior of a free-fall dropped object.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.414-420
• /
• 1997

An intelligent speed control system for marine diesel engines is presented. The approach adopt¬ed is to use a conventional PID controller for normal operation and a feedforward controller for adaptive control. The feedforward controller is a neural network. The neural network is the inverse dynamics model of the plant, which is being trained on line. The parametric model of the diesel engine is represented in a linear second-order system, with a first-order combustion part and a revolution part each at a normal operating point. The time delay in the control of the com¬bustion part is approximated to the first-order system. The tuned PID parameters are set based on the model for normal operating point. To obtain the inverse dynamics of the diesel engine system, two neural networks are used, one for inverse, the other for forward dynamics. The former is posi¬tioned across the plant to learn its inverse dynamics during operation, and the latter is placed in series with the controlled plant. Simulation results are presented to illustrate the applicability of the proposed scheme to intelligent adaptive control of diesel engines.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.3
• /
• pp.207-216
• /
• 2024

This study conducted a marine experiment to improve the fishing system using miniaturized nets for anchovy boat seine to reduce the fleet size. As a result, the miniaturized net for anchovy boat seine properly opened the entrance of the bag net using the buoyancy of the flotation for position indication and the setting force of the ground rope without operating a separate fish detecting boat by attaching a large flotation at the entrances of the inside wing net and the bag net. This also enabled an operation type where the entrance of the bag net is confirmed using a flotation for position indication from a netting boat. The time and the number of people used for net casting and net hauling in the marine experiment were average of five minutes and 25-30 minutes, respectively, and 23-30 people for the existent net, while for the miniaturized large-scale net were average of three minutes and 23-25 minutes, respectively, and 19-25 people. This indicates that the operation time was shortened, the number of fish detecting boats was reduced by one boat, and the number of people for fishing work was decreased by four or five people due to the improvement of fishing operation system according to the reduction of fishing net size. As a result of measuring the shaft horsepower during net towing, the maximum net towing horsepower was 250 HP in comparison to the maximum RPM of the engine (1,200 RPM), indicating that the legal horsepower of 250 HP is enough to conduct net towing and the competitiveness of fishing using the net for anchovy boat seine is ensured through operation cost reduction.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.2
• /
• pp.419-432
• /
• 2013

This study investigates the actual status of Saturday program operation in Busan and explores the routes for acquiring information about the Saturday program and satisfaction with the program operation with the subjects of middle school students residing in Busan in order to develop efficient operation methods and also find ways to enhance the participation rate of the students. Therefore, with the subjects of 569 first, second, and third graders at 3 middle schools located in Busan, this research investigated the actual status of Saturday program operation in Busan to figure out the participation rate and satisfaction of the Saturday program, efficient operation methods for the Saturday program and ways to encourage participation in the Saturday program. It is needed to install cooperative Saturday program support centers to be operated collaboratively by local autonomous entities and the offices of education afterwards. And it is necessary to figure out which institution should take charge of the Saturday program according to the requests from teachers and students so that the proper institution can secure the budget and manpower and build a system to develop and operate the Saturday program.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.2
• /
• pp.137-145
• /
• 2012

In order to survey the conditions of bycatch and discards for a gape net, a series of filed surveys was carried out total 10 surveys on two gape nets operated in the coastal area of Jindo during July to November 2008. The all catches in each survey were measured the body length, weight after sorted species. The analysis of catch data was conducted to separate 'first operation' and 'general operation'. In this study, the first operation defined as hauling the fishing gears that soaked over 10 hours because of setting on the previous day. The general operation means the haul of fishing gears conducted at intervals of one of or two hours after first operation. The bycatch in this study is defined as the other species except for anchovy, and bycatch rate refers to the proportion of bycatch to total catch. From the survey results, the average bycatch rates on first operations were 50% and 51% for Masa-ri and Supum-ri areas in Jindo, respectively. Also, the average bycatch rates on general operation were 2% and 3% for Masa-ri and Supum-ri areas in Jindo, respectively. The proportion of anchovy to total catch caught represented 75.5%. It needs the research on the selective fishing technology to reduce the bycatch on the gape net fishery.

• Ocean and Polar Research
• /
• v.38 no.4
• /
• pp.315-324
• /
• 2016

In this study, we investigated changes in the macrobenthic community in Sihwa tidal flat before and after the operation of a Tidal Power Plant (TPP). In order to investigate changes in the macrobenthic community structure, field surveys were conducted at eighteen stations in 4 transect lines every September from 2011 to 2015. Mean density of macrobenthos decreased to $116ind./m^2$ in 2015 from $1,602ind./m^2$ in 2011. While the mean density of macrobenthos has decreased, species richness and biomass have gradually increased. The species diversity and SEP (Shannon-wiener Evenness Proportion) have also gradually increased over time since the operation of the TPP. The macrobenthic community in Sihwa tidal flat was divided into 4 groups on a yearly base. Before the operation of TPP, opportunistic species such as Neanthes succina and Polydora cornuta largely contributed to the structure of the macrobenthic community, while equilibrium species such as Periserrula leucophryna and Scopimera globosa contributed after the operation. With the operation of TPP, the macrobenthic community has rapidly recovered and this might be related to improvement in the quality of water and sedimentary environments as a result of an increase in water mass volume exchanged through the TPP gate.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.53-59
• /
• 2021

The marine transport industry generally applies new technologies later than other transport industries, such as airways and railways. Vessels require efficient operation, and their performance and lifespan depend on the level of maintenance and management. Many studies have shown that corrective maintenance (CM) and time-based maintenance (TBM) have restrictions with respect to enabling efficient maintenance of workload and cost to improve operational efficiency. Predictive maintenance (PdM) is an advanced technology that allows monitoring the condition and performance of a target machine to predict its time of failure and helps maintain the key machinery in optimal working conditions at all times. This study presents the development of a marine predictive maintenance (MPdM; maritime predictive maintenance) method based on applying PdM to the marine environment. The MPdM scheme is designed by considering the special environment of the marine transport industry and the extreme marine conditions. Further, results of the study elaborates upon the concept of MPdM and its necessity to advancing marine transportation in the future.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.34-38
• /
• 2016

Recently, electric propulsion systems are been increasingly used in large cruise ships and merchant vessels. When abnormal electrical conditions occur in the motor of an electric propulsion ship, they can cause serious damage to the motor and propeller shaft. Research on abnormal conditions of propulsion motors used in electric propulsion vessels and electric ships difficult to find. In this study, a mathematical model of the electric propulsion system is proposed to analyze transient phenomena that occur in the case of electric propulsion motor or propeller shaft malfunction. A synchronous motor was used in the MATLAB computer simulation of this study. In the event of electrical malfunction of the electric propulsion motor at rated operation, over current occurs in the condition of 1 phase ground, over torque occurs at 3 and 2 phases ground and over current and torque occur when exciting power fails at rated operation.