• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.603-613
• /
• 2010

The Domi Basin in the South Sea of Korea is located between the Jeju Basin and Ulleung Basins, and is characterized by several sediment sags that are interested to have formed by crustal extension. This paper aims to derive an optimized seismic data processing procedure which helps stratigraphic interpretation of the Domi Basin. In particular, our data processing flow incorporated horizon velocity analysis (HVA) and surface-relative wave equation multiple rejection (SRWEMR) to improve the quality of stack section by enhancing the continuity of reflection events and suppressing peg-leg multiples respectively. As a result of processing procedures in this study, unconformities were recognized in the stack section that defines the early and middle Miocene, Eocene-Oligocene sequences. In addition, the overall quality of the stack section was increased as essential data to investigate the evolution of the basin. The suppression of multiple resulted in the identification of the Cretaceous basement. The data processing scheme evaluated through this study is expected to improve the standardization of processing sequences for seismic data from the Domi and adjacent Sora and north-Sora Basins.

• Geophysics and Geophysical Exploration
• /
• v.18 no.4
• /
• pp.181-196
• /
• 2015

A 3.5 kHz or chirp sub-bottom profiling survey is widely used in the marine geological and engineering purpose exploration. However, swells in the sea degrade the quality of the survey data. The horizontal continuity of profiler data can be enhanced and the quality can be improved by correcting the influence of the swell. Accurate detection of sea bottom location is important in correcting the swell effect. In this study, we tried to pick sea bottom locations by finding the position of crossing a threshold of the maximum value for the raw data and transformed data of envelope or energy ratio. However, in case of the low-quality data where the sea bottom signals are not clear due to sea wave noise, automatic sea bottom detection at the individual traces was not successful. We corrected the mispicks for the low quality data and obtained satisfactory results by picking a sea bottom within a range considering the previous average of sea bottom, and excluding unreliable big-difference picks. In case of trace by trace picking, fewest mispicks were found when using energy ratio data. In case of picking considering the previous average, the correction result was relatively satisfactory when using raw data.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2010.10a
• /
• pp.59-62
• /
• 2010

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.515-524
• /
• 2014

The Korea Institute of Ocean Science and Technology has acquired detailed biological, chemicophysical, and geological data in the northeastern Pacific through a manganese nodule program since 1983. Plenty of manganese nodules were collected to estimate the amount of resources by free-fall grab and box corer. The collected manganese nodules have been archived systematically in the rock and mineral storage section of the Library of Marine Samples (LIMS) since 2012. The LIMS provides essencial information on the stored samples including sample name, nodule type, sampling location, depth, and equipment. Although a high quality database of the information system is under construction, the samples have tagged information for manganese nodules like chemical composition, morphology, weight, size, abundance, and photograph. In this study, we attempted to provide information on the well-organized and easily accessible archived manganese nodule samples for future studies and to introduce the usefulness of the LIMS.

• Geophysics and Geophysical Exploration
• /
• v.6 no.3
• /
• pp.126-133
• /
• 2003

High-resolution shallow marine seismic surveys have been carried out for the resources exploration, engineering applications and Quaternary mapping. To improve the resolution of subsurface structure image, multichannel digital technique has been applied. The quality of the image depends on the vertical and horizontal resolution and signal to noise (S/N) ratio which are associated with the data acquisition parameters such as sample interval, common midpoint (CMP) interval and CMP fold. To understand the effect of the acquisition parameters, a test survey was carried out off Yeosu and the acquired data were analyzed. A 30 $in^3$ small air gun was used as a seismic source and 8 channel streamer cable with a 5 m group interval was used as a receiver. The data were digitally recorded with a shot interval of 2 s and sample interval of 0.1 ms. The acquired data were resampled with various sample intervals, CMP intervals and CMP folds. The resampled data were processed, plotted as seismic sections and compared each other. The analysis results show that thin bed structure with ${\~}1m$ thickness and ${\~}6^{\circ}$ slope can be imaged with good resolution and continuity and low noise using the acquisition parameters with a sample interval shorter than 0.2 ms, CMP interval shorter than 2.5 m and CMP fold more than 4. Because seismic resolution is associated with the acquisition parameters, the quality of the subsurface structure can be imaged successfully using suitable and optimum acquisition parameters.

• Proceedings of the KSEEG Conference
• /
• 2007.04a
• /
• pp.603-603
• /
• 2007

See Full Text

• Geophysics and Geophysical Exploration
• /
• v.17 no.1
• /
• pp.34-44
• /
• 2014

Because offshore plant industry needs to design, deploy and operate much of equipment especially, the latest trend shows the installation of production facilities is augmented in the subsea. The installed facilities are very difficult to be repaired or changed because they are located in the subsea. For solving these problems, both the directly related information of the production like the optimal number, position and depth of wells and the distribution for effective operation and safety of equipment of subsea should be considered at the preliminary stage of FEED (Front End Engineering Design). The marine exploration is introduced in this paper for providing the fundamental technology to answer the questions related to above considering points. First, some kinds of the offshore plant facilities are enumerated and aims of marine exploration for the offshore oil/gas development are summarized. In addition to it, the main roles of marine survey, in the step of designing and installing offshore oil-gas plant, development are briefly listed. And then foreign examples are shown to help the reader's understand. This paper is hoped to be helpful for understanding the marine exploration that can be applied to offshore oil/gas plant and to be contributed to developing the domestic techniques in this field for the future.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.229-237
• /
• 2023

The use of artificial sources such as explosives and mechanical vibrations for seismic exploration in urban areas poses challenges, as the vibrations and noise generated can lead to complaints. As an alternative to artificial sources, the surface waves generated by traffic noise can be used to investigate the subsurface properties of urban areas. However, traffic noise takes the form of plane waves moving continuously at a constant speed. To apply existing surface wave processing/inversion techniques to traffic noise, the recorded data need to be transformed into a virtual shot gather format using seismic interferometry. In this study, various seismic interferometry methods were applied to traffic noise data, and the optimal method was derived by comparing the results in the Radon and F-K domains. Additionally, the data acquired using various receiver arrays were processed using seismic interferometry, and the results were compared and analyzed to determine the most optimal receiver array direction for exploration.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.127-136
• /
• 2008

To identify the potential area of gas hydrate in the Ulleung Basin, 2-D and 3-D seismic surveys using R/V Tamhae II were conducted in 2005 and 2006. Seismic survey equipment consisted of navigation system, recording system, streamer cable and air-gun source. For reliable velocity analysis in a deep sea area where water depths are mostly greater than 1,000 m and the target depth is up to about 500 msec interval below the seafloor, 3-km-long streamer and 1,035 $in^3$ tuned air-gun array were used. During the survey, a suite of quality control operations including source signature analysis, 2-D brute stack, RMS noise analysis and FK analysis were performed. The source signature was calculated to verify its conformity to quality specification and the gun dropout test was carried out to examine signature changes due to a single air gun's failure. From the online quality analysis, we could conclude that the overall data quality was very good even though some seismic data were affected by swell noise, parity error, spike noise and current rip noise. Especially, by checking the result of data quality enhancement using FK filtering and missing trace restoration technique for the 3-D seismic data inevitably contaminated with current rip noises, the acquired data were accepted and the field survey could be conducted continuously. Even in survey areas where the acquired data would be unsuitable for quality specification, the marine seismic survey efficiency could be improved by showing the possibility of noise suppression through onboard data processing.

• Spatial Information Research
• /
• v.19 no.6
• /
• pp.19-28
• /
• 2011

Recently, the interests of marine mineral resources has been increasing from the depletion of land resources around the world and many countries are involving in marine exploration work. South Korea is also currently performing exploration work to estimate the marine mineral resources around the Korean Peninsula. However, massive amounts of marine exploration data accumulated from the long-term exploration work have not been systematically managed. The data have been managed by the file based system instead of commercial database. The aim of this study is to construct GIS-based Marine Mineral Resource Information System using a spatial database for the core sediments of the marine exploration data. For constructing such DB system, GIS-based data items were classified, and a database was designed using relational database model. The database was constructed using commercial DBMS(Database Management System), Oracle. Also, necessary functions of the system were defined for the effective use of database based on users' requirement analysis. The GIS-based Marine Mineral Resource Information System has enabled to support the systematic management of the marine exploration data. Furthermore, it is expected that this spatial database will be useful in estimating the reserves of the mineral resources and provide valuable information for economic evaluation. In the future, the application of advanced techniques of spatial analysis and 3-dimensional display function will be required.