• Journal of Plant Biology
• /
• v.33 no.4
• /
• pp.225-236
• /
• 1990

Intertidal algal communities of Muchangpo and Maryangri in western coast of Korea were investigated qualitatively and quantitatively. Seasonal assessments of species composition, biomass, dominant species in biomass and vertical distributional pattern were conducted from July 1986 to April 1988. Ninety-nine species of marine algae (13 Cyanophyta, 12 Chlorophyta, 24 Phaeophyta and 50 Rhodophyta) were observed, of which 90 (13 Cyanophyta, 11 Chlorophyta, 23 Phaeophyta and 43 Rhodophyta) were from Muchangpo and 83 (10 Cyanophyta, 11 Chlorophyta, 21 Phaeophyta and 41 Rhodophyta) were from Maryangri, respectively. Ordination by detrended correspondence analysis based on the floristic data from nine localities indicated that, on the whole, marine algal distribution in western coast of Korea might be divided into two regions, i.e. the north and the south, being separated at the Taean Peninsula, the mid-western coast. Seasonal fluctuations of mean biomass were 44.55-201.19g-dry wt/$m^2$ at Muchangpo and 19.59-134.76g-dry wt/$m^2$ at Maryangri. Important species determined by the specific proportion of biomass were Sargassum thunbergii, Pelvetia siliquosa and Corallina pilulifera at Muchangpo, and Sargassum thunbergii and Corallina pilulifera at Maryangri.

• Journal of Life Science
• /
• v.8 no.2
• /
• pp.208-215
• /
• 1998

It was investigated the biosorption performances of copper by the immobilized biomass of nonliving marine brown alge h. fusiformis by each of the Ca-alginate method(Ca-ALG), Ba-alginate method(Ba-ALG), polyethylene glycol method(PEG), and carrageenan method (CARR). The copper removal performance increased but the copper uptake decreased as the biomass amount was increased. However, the copper uptake by the immobilized biomass increased with increasing initial copper concentration. The copper uptake by the immobilized biomass of the immobilization method decreased in the following sequence; Ca-ALG>Ba-ALG>PEG>CARR among the immoblization emthods. The copper uptake by the immobilized biomass followed the Langmuir isotherm better than the Freundlich isotherm.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.438-442
• /
• 2013

The study of bioproduct production from inexpensive biomass such as marine biomass has recently attracted considerable attention. Because, marine biomass which compared to land biomass, it can be grown rapidly and is easily cultivated without the need for expensive equipment. In addition, the carbohydrate contents are similar or higher than land biomass such as woody biomass and can be easily converted to chemicals through proper chemical processes. In the production of various biochemicals from marine biomass, levulinic acid is a highly versatile chemical with numerous industrial uses and has the potential to become a commodity chemical. It can be used as a raw material for resins, plasticizers, textiles, animal feed, coatings and antifreeze. In this study, experiments were carried out to determine the optimum conditions of temperature, acid concentration and reaction time for production of levulinic acid from marine biomass, Gelidium amansii, using two-step treatment. In the first hydrolysis step, solid-state cellulose which was used to produce ethanol by fermentation and liquid-state galactose which used to produce bioproduct such as levulinic aicd were obtained through acid soaking. In the second hydrolysis step, the liquid-state galactose was converted into levulinic acid via a high-temperature reaction in a batch reactor. As a result, the overall production yield of Gelidium amansii to levulinic acid in the two-step acid hydrolysis was approximately 20.6% on the initial biomass basis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.5
• /
• pp.768-775
• /
• 2015

Seasonal variability in the marine seaweed community structure was examined in the intertidal zones at nine study sites in Hallyeohaesang National Park, on the southern coast of Korea from March to October 2014. A total of 145 seaweeds were indentified, comprising 15 green, 41 brown and 89 red algae. Coarsely branched seaweeds were the dominant functional group, comprising 58.95% in species number, whereas filamentous, sheet, thick leathery, crustose and jointed calcareous forms comprised 2.63-17.72% each. The seaweed biomass averaged 358.00 g dry wt/m² and it was maximal at Somaemuldo (847.64 g dry wt/m²) and minimal at Gamam (56.51 g dry wt/m²). Based on biomass, the dominant and subdominant seaweeds were Ulva australis at Gamam, Sargassum thunbergii at Sangju, Ulva australis and S.fulvellum at Neukdo, S.horneri at Dala-Bijindo-Somaemuldo, S. thunbergii at Dapo, and Corallina pilulifera at Songdo. Community indices were as follows: dominance index (DI), 0.43-0.71; richness index (R), 8.26-16.50; evenness index (J'), 0.36-0.54; and diversity index (H'), 1.57-2.19. In conclusion, we found that both biomass and the community structure of seaweeds in Hallyeohaesang National Park were similar to those in other studies of the Southern Sea along the Korean peninsula, and that Hallyeohaesang National Park is a relatively favorable habitat for seaweeds. Future studies should examine the changes in seaweed composition and biomass as they relate to climate change and environmental pollution.

• Ocean and Polar Research
• /
• v.23 no.4
• /
• pp.323-335
• /
• 2001

Distribution features of foulers attached on 28 ships of 6 main shipping routes (SR) of the Far East Sea Basin were analyzed using various statistical methods. Collections obtained during 1976-1990 in the expeditions by the Institute of Marine Biology were used for the analyses. Samples were taken from the ships during anchorage by SCUBA diving and from dry-docks of Vladivostok ship-repairing yard. In all cases, the distribution patterns of most animals and algal species showed clear contagious patterns. Total biomass of fouling organisms and biomass of attached animals frequently increased along the horizontal direction of ship hulls, from the stem to the sternpost. Animal and algal species were usually located at different sites of the hulls. According to the increasing floating speed, there was, a clear tendency of the displacement in main fouling biomass from the stem to the stem. Any generalizations and deductions concerning the distribution patterns of the foulers from the same SR ships are not always substantiated, but one may see some similarities of the fouler distributions in many cases. Micro-scale turbulence generated by water flow around a ship hull for the distribution of fouling organisms is discussed.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.1
• /
• pp.19-26
• /
• 2016

Biomass has been used for energy sources from the prehistoric age. Biomass are converted into solid, liquid or gaseous fuels and are used for heating, electricity generation or for transportation recently. Solid biofuels such as bio-chips or bio-pellet are used for heating or electricity generation. Liquid biofuels such as biodiesel and bioethanol from sugars or lignocellulosics are well known renewable transportation fuels. biogas produced from organic waste are also used for heating, generation and vehicles. Biomass resources for the production of above mentioned biofuels are classified under following 4 categories, such as forest biomass, agricultural residue biomass, livestock manure and municipal organic wastes. The energy potential of those biomass resources existing in Korea are estimated. The energy potential for dry biomass (forest, agricultural, municipal waste) were estimated from their heating value contained, whereas energy potential of wet biomass (livestock manure, food waste, waste sludge) is calculated from the biological methane potential of them on annual basis. Biomass resources potential of those 4 categories in Korea are estimated to be as follows. Forest biomass 355.602 million TOE, agricultural biomass 4.019 million TOE, livestock manure biomass 1.455 million TOE, and municipal organic waste 1.074 million TOE are available for biofuels production annually.

• Korean Journal of Environment and Ecology
• /
• v.27 no.6
• /
• pp.655-665
• /
• 2013

This study was carried out to investigate the community structure and biomass of benthic marine algae at the intertidal and subtidal zones of Eocheongdo on the western coast of Korea seasonally from July 2008 to April 2009. Total 101 species including 12 of green algae, 23 of brown algae and 66 of red algae were collected and identified. Among these species, 19 species were found throughout the year. The dominant species which contributed significantly to the total biomass were Corallina pilulifera, Gelidium elegans, Sargassum thunbergii, Sargassum fusiforme, Saccharina japonica, Sargassum honeri and Sargassum filicinum. Annual seaweed biomass in dry weight was $237.5gm^{-2}$ and maximum biomass was recorded seasonally in winter ($272.1gm^{-2}$), while minimum was recorded in summer ($204.5gm^{-2}$). The number of species and biomass of the subtidal zone were greater than those of the intertidal zone. The number of species and biomass in Eocheongdo seem to be higher than those of other islands in the western coast of Korea, due to the environmental conditions characterized by the increased transparency, and the well established rocky shore.

• Journal of Marine Bioscience and Biotechnology
• /
• v.9 no.1
• /
• pp.14-21
• /
• 2017

The purpose of this study was to inhibit biofouling on a selectively permeable membrane (SPM) and increase biomass productivity in marine photobioreactors (PBRs) for microalgal cultivation by chemical treatment. Surfaces of a SPM, composed of polyethylene terephthalate (PET), was sulfonated to decrease hydrophobicity through attaching negatively charged sulfonic groups. Reaction time of sulfonation was varied from 0 min to 60 min. As the reaction time increased, the water contact angle value of SPM surface was decreased from $75.5^{\circ}$ to $44.5^{\circ}$, indicating decrease of surface hydrophobicity. Furthermore, the water permeability of sulfonated SPM was increased from $5.42mL/m^2/s$ to $10.58mL/m^2/s$, which reflects higher nutrients transfer rates through the membranes, due to decreased hydrophobicity. When cultivating Tetraselmis sp. using 100-mL floating PBRs with sulfonated SPMs, biomass productivity was improved by 34% compared with the control group (non-reacted SPMs). In addition, scanning electron microscopic observation of SPMs used for cultivation clearly revealed lower degree of cell attachment on the sulfonated SPMs. These results suggest that sulfornation of a PET SPM could improve microalgal biomass productivity by increasing nutrients transfer rates and inhibiting biofouling by algal cells.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.3
• /
• pp.432-438
• /
• 2018

Microalgae hold promise as a renewable energy source for the production of biofuel, as they can convert light energy into chemical energy through photosynthesis. However, cost-efficient harvest of microalgae remains a major challenge to commercial-scale algal biofuel production. We first investigated the potential of electrolytic water as a flocculant for harvesting Tetraselmis sp. Alkaline electrolyzed water (AEW) is produced at the cathode through water electrolysis. It contains mineral ions such as $Na^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$ that can act as flocculants. The flocculation activity with AEW was evaluated via culture density, AEW concentration, medium pH, settling time, and ionic strength analyses. The flocculation efficiency was 88.7% at 20% AEW (pH 8, 10 min) with a biomass concentration of 2 g/l. The initial biomass concentration and medium pH had significant influences on the flocculation activity of AEW. A viability test of flocculated microalgal cells was conducted using Evans blue stain, and the cells appeared intact. Furthermore, the growth rate of Tetraselmis sp. in recycled flocculation medium was similar to the growth rate in fresh F/2 medium. Our results suggested that AEW flocculation could be a very useful and affordable methodology for fresh biomass harvesting with environmentally friendly easy operation in part of the algal biofuel production process.

• Journal of Marine Bioscience and Biotechnology
• /
• v.8 no.1
• /
• pp.18-23
• /
• 2016

It is important to design photobioreactor by cheap material for economical microalgal biomass production. In this study, two types of marine photobioreactors (MPBR), made by either polyvinyl chloride (MPBR-PVC) or high density poly ethylene (MPBR-HDPE), are used and performance of these were compared. Tetraselmis sp. KCTC 12236BP is a green marine alga that isolated from Ganghwa Island, Korea, and the strain was used for marine cultivations using MPBR-PVC and MPBR-HDPE. The cultivations were performed three times in the spring season of 2012 using MPBR-PVC and of 2013 using MPBR-HDPE in the coastal area of Young Heung Island. As the results, MPBR-PVC shows higher biomass productivities than MPBR-HDPE, due to its high light transmittance. In the cultivations using MPBR-PVC, the average sea water temperature was $11.5^{\circ}C$ during the first experiment and $16.5^{\circ}C$ during the second and third experiments. Average light intensities during three times for experiments were 407.5, 268.1 and $273.0{\mu}{\cdot}E{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. The maximum fresh cell weight and average biomass productivity were $1.2g{\cdot}L^{-1}$ and $0.12g{\cdot}L^{-1}{\cdot}day^{-1}$. These results showed that Tetraselmis sp. KCTC12236BP were adapted well with the environmental conditions from ocean, and grow in the MPBR-PVC and MPBR-HDPE.