• Title/Summary/Keyword: Marine Waste

Search Result 361, Processing Time 0.024 seconds

Analysis of 1MW Closed OTEC Cycle Using Thermal Effluent and Waste Heat (발전소 온배수를 이용한 1MW급 폐쇄형 해양온도차발전 성능해석)

  • Kim, Hyeon-Ju;Lee, Ho-Saeng;Jung, Dong-Ho;Moon, Deok-Soo
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.34 no.4
    • /
    • pp.470-476
    • /
    • 2010
  • The thermodynamic performance of closed ocean thermal energy conversion (OTEC) cycle with 1 MW gross power was evaluated to obtain the basic data for the optimal design of OTEC. The basic thermodynamic model for OTEC is Rankine cycle and the thermal effluent from power plant was used for the heat source of evaporator. The cycle performance such as efficiency, heat exchanger capacity, etc. was analyzed on the temperature variation of thermal effluent. The saturated pressure of evaporator increased with respect to the increase of thermal effluent temperature, so the cycle efficiency increased and necessary capacity of evaporator and condenser decreased under 1 MW gross power. As the thermal effluent temperature increases about $15^{\circ}C$, the cycle efficiency increased approximately 44%. So, it was revealed that thermal effluent from power plant is important heat source for OTEC plant. Also, if there is an available waste heat, it can be transferred heat to the working fluid form the evaporator through heat exchanger and cycle efficiency will be increased.

광양광산 갱내수에 의한 하천 생태계 영향 평가 및 갱내수의 처리

  • Lee Geun-Yeong;Kim Ju-Yong;Lee Byeong-Tae;Kim Gyeong-Ung;An Gwang-Guk;Gwon Yeong-Ho;Kim Jeong-Yeon;Park Yeong-Seok
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2005.04a
    • /
    • pp.397-401
    • /
    • 2005
  • Acid mine drainage and waste of abandoned mine area have caused serious water pollution and destruction of an ecosystem because of exposing to environment without an appropriate treatment. Gwang-yang mine area also has a serious problem in the nearby residential area and waterway ecosystems. The objectives of this research are to develop the most suitable remediation system for acid mine drainage by using waste materials, and to diagnose stream environments impacted by acid mine drainage through the new ecological health assessment methodology, and thus ultimately providing a restoring methodology to mining regions. In the water system health assessment, the result of ESHI model, RBP and Karr suggested by US EPA is revised by ecological features of our country, come to ESHI score 13; 'Very poor' at some points. Together with pH value and heavy metal concentration, it's the aggravation of ecological health index caused by chemical disturbances. In the acid mine drainage treatment, we apply marine shells and slags to this system. Slags had the best removal ability for heavy metals, but pH value was more than 10 exceeding the standard for drain water. In case of marine shells, pH of treated water maintained 7 to 8, and concentrations of Fe and Zn decreased significantly after treatment.

  • PDF

Computational Investigation of the Thermal Performances of Polymer Heat Sinks Passively-Cooled by Seawater for Thermoelectric Waste Heat Recovery (열전폐열회수를 위해 수동적으로 해수냉각되는 폴리머 히트싱크 열성능의 수치적 연구)

  • Kim, Kyoung Joon
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.39 no.4
    • /
    • pp.432-436
    • /
    • 2015
  • This study computationally explored the thermal performance of passively-cooled polymer heat sinks utilizing seawater. Polymer heat sinks are proposed as cooling modules of the cold sides of thermoelectric generators for waste heat recovery. 3-D Computational Fluid Dynamics (CFD) modelling was conducted for a detailed numerical study. Polyphenylene sulfide (PPS) and pyrolytic graphite (PG) were selected for the base materials of polymer heat sinks. The computational study evaluated the performance of the PPS and PG heat sinks at various fin numbers and fin thicknesses. Their performances were compared with those of aluminum (Al) and titanium (Ti) heat sinks. The study results showed that the thermal performance of the PG heat sink was 3~4 times better than that of the Ti heat sink. This might be due mainly to the better heat spreading of the PG heat sink than the Ti heat sink. The effect of the number of fins on the performance of the PG heat sink was dissimilar to the cases of the PPS and Ti heat sinks. This result can be explained by the interrelationships among heat spreading, surface area enhancement, and fluidic resistance incorporating with an increase in the number of fins.

Environmental Characteristics of Shore Pollution Source in Southern Part of Sinan, Jangsando area in the West Coast, Korea (서해 신안 장산 남부해역의 육상오염원 환경특성 분석)

  • Yoon, Hayan;Shin, Yongsik
    • Journal of Marine Life Science
    • /
    • v.2 no.2
    • /
    • pp.56-61
    • /
    • 2017
  • This study examined the environmental characteristics of shore pollution sources in the southern part of the Sinan, Jangsando area in the West Coast of Korea. A shoreline survey of the watershed was conducted to identify the pollution sources and measure the water discharge rate and microbial hygiene of water and finally estimate the possible impact area of pollution. Forty five of pollution sources in total were identified and they were grouped into sewage (33), agriculture waste water (1) and waste water from inland fish farm (11). Nine among them were discharged into the seawater and discharge volume was 72,857~281,250 l/min. Fecal coliforms of St. 72 (sewage) and St. 74 (shrimp farm) were 490 MPN/100 ml and 49 MPN/100 ml and the impact zones of the pollution were 4,389 m and 1,900 m respectively.

Investigation of Waste Shell Fine Aggregates on the Material Characteristics of Cement Mortars (패각 잔골재가 시멘트 모르타르 재료 특성에 미치는 영향 분석)

  • Oh, Seo-Eun;Choi, Seung-Ha;Kim, Kyuwon;Han, Soo-Ho;Chung, Sang-Yeop
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.44 no.1
    • /
    • pp.33-39
    • /
    • 2024
  • This study explores the utilization of common marine wastes, specifically seashells, such as oysters and cockles, as alternative fine aggregates in construction materials. The considered seashells were cleaned and pre-processed for use as a substitute for aggregate in mortar. Cement mortar specimens were prepared under different conditions, such as substitution ratios and the cleaning status of the seashells. The compressive strength of the mortars specimens was evaluated, and the solid and porous structures of each specimen were analyzed using microstructure analysis methods such as XRD, SEM, and micro-CT. The results confirmed that oyster and cockle seashells are composed of different calcium carbonate polymorphs, and their microstructural characteristics influence the mechanical properties of the cement mortar specimens.

Effects of Microplastic Exposure against White Spot Syndrome Virus Infection in Pacific White Shrimp (Penaeus vannamei)

  • Hye Jin Jeon;Sangsu Seo;Chorong Lee;Bumkeun Kim;Patharapol Piamsomboon;Ji Hyung Kim;Jee Eun Han
    • Journal of Microbiology and Biotechnology
    • /
    • v.34 no.8
    • /
    • pp.1705-1710
    • /
    • 2024
  • Plastic waste has emerged as a major environmental concern in recent years. As plastic waste discharged into the marine environment, it undergoes a breakdown process, eventually accumulating in aquatic organisms in the form of microplastics (MPs). To date, reduced food intake, nutritional absorption, and impaired immune system are known adverse effects of MPs-exposed aquatic organisms. This study aims to investigate whether MP exposure accelerated white spot syndrome virus (WSSV) infection in Pacific white shrimp (Penaeus vannamei) via laboratory tests. Briefly, experimental shrimp were divided into four groups; WSSV (group 1); MP (group 2); WSSV + MP (group 3); and Control (group 4). No mortality was observed in group 2, group 4, and even in group 1. However, group 3 showed a cumulative mortality of 50% during the experimental period. The PCR assay results showed no WSSV in the other three groups (groups 1, 2, and 4), but the dead and alive shrimp collected from group 3 were confirmed to be infected with the virus. Histopathological examination revealed normal structures in the hepatopancreas, gill, and muscle tissues of group 4, whereas numerous abnormally shaped nuclei were detected in the gill tissue of group 2. Moreover, group 1 showed minor WSSV-related lesions with few basophilic inclusion bodies in the gills, interestingly, group 3 exhibited severe lesions with numerous basophilic inclusion bodies in the gills. In conclusion, this study confirmed the correlation between the viral disease of shrimp and MPs, which can cause significant economic losses to the shrimp aquaculture industry.

Environmental Analysis of Waste Cable Recycling Process using a Life Cycle Assessment Method (전과정평가기법을 활용한 폐전선 재자원화 공정의 환경성 평가)

  • Jang, Mi-Sun;Seo, Hyo-Su;Park, Hee-Won;Hwang, Yong-Woo;Kang, Hong-Yoon
    • Resources Recycling
    • /
    • v.31 no.1
    • /
    • pp.37-45
    • /
    • 2022
  • The development of the electrical, electronic, and telecommunication industries has increased the share of electricity in total energy consumption. With the enforcement of the Act on the Promotion of the Development, Use, and Diffusion of New and Renewable Energy in 2021, the mandatory supply ratio of new and renewable energy is expected to expand, and the amount of waste cables generated in the stage of replacing and discarding cables used in the industry is also expected to increase. The purpose of this study was to quantify the environmental burden of waste cable recycling through the life cycle assessment (LCA) method. The results showed that the higher the amount of glue contained in the waste cable, the greater was the amount of fine dust and greenhouse gases generated. In addition, by assigning weights to 10 environmental burden items, it was confirmed that the marine aquatic eco-toxicity potential (MAETP) and human toxicity potential (HTP) had the greatest environmental burden. The main causes were identified as heptane and ethanol, which were the glue contained in the waste cable and the cleaning solutions used to remove them. Therefore, it is necessary to refrain from using glue in the cable production process and reduce the environmental burden by reducing the use of waste cable cleaning solutions used in the recycling process or using alternative materials.

The State of Marine Pollution in the Waters adjacent to Shipyards in Korea - 1. Analysis of Pollution Incidents occurred in Shipyards (국내 조선소 주변해역의 해양오염 현황 - 1. 조선소 오염사고 분석)

  • Kim, Kwang-Soo;Han, Won-Hui
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.20 no.6
    • /
    • pp.646-652
    • /
    • 2014
  • Data of pollution incidents which occurred in shipyards of South Korea for 10 years from 2004 to 2013 were collected and analyzed in order to propose the plans for the prevention of pollution incidents in shipyards. Total number of pollution incidents in shipyards was 103 cases over the nation of Korea for the recent 10 years and the average annual number was about 10 cases, and annual cases tended to increase from 8 cases in 2004 to 23 cases in 2010 and then to decrease to 9 cases in 2013. The location data of pollution incidents showed 32 cases in Busan metropolitan city (31%), 30 cases in Jeonnam (29%), 21 cases in Gyeongam (21%), 5 cases in Jeju (5%), 4 cases in Gangwon (4%), 4 cases in Gyeongbuk (4%), 3 cases in Chungnam (3%) and 3 cases in Incheon metropolitan city (3%). According to the data of work types of shipyards, 60 cases happened during the work of ship repair (58%), 25 cases during the work of ship breakup (24%), 10 cases in the course of ship building (10%) and 8 cases by others (8%). The data of pollutant type showed oil and oily mixtures to be 59 cases (57%), waste paint dust to be 22 cases (21%), iron dust and welding slag to be 13 cases (13%), wastes to be 4 cases (4%), waste FRP powder to be 3 cases (3%), and others to be 2 cases (2%). The plans for the prevention of pollution incidents in shipyards of Korea were proposed as follows; (1) Observance of the related laws and regulations, (2) Establishment and implementation of action plans to prevent areas dense with shipyards from causing pollution incidents, (3) Establishment and implementation of oil pollution prevention plans in shipyards, especially during the ship repair and breakup works, (4) Preparation of measures to solve civil complaints against pollution incidents in shipyards, and (5) Improvement in national management for the control of shipyards.

Recovery of a High Molecular Soluble Protein from Surimi Wastewater Using Calcium Powder of Cuttle Bone (갑오징어갑 칼슘을 이용한 Surimi 가공폐수로부터 단백질의 회수)

  • KIM Jin-Soo;CHO Moon-Lae;HEU Min-Soo;CHOI Yeung Joon
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.36 no.2
    • /
    • pp.80-87
    • /
    • 2003
  • Recovery conditions and characteristics of a high molecular soluble protein from surimi processing wastewater in marine manufacture using calcium powder of cuttle bone treated with acetic acid (ATC) were examined. Judging from results of total-N, pH, COD, turbidity and yields, optimal treatment concentration of ATC for recovery of high molecular soluble proteins from wastewater was $1.0\%.$ The protein recovered from seafood waste (PRW) was macromolecule weight. The COD value in the wastewater treated with ATC was very high. The PRW had a $78.4\%$ in moisture, $1.0\%$ in crude lipid and $5.7\%$ in crude ash. The proximate composition, except the crude ash, of the PRW was similar to that of commercial surimi. The PRW showed white index and similar in the content and in the composition of total amino acid to those of commercial surimi. From the results of sensory evaluation on white index and texture, the heat-induced surimi gel prepared with $5\%$ subsititution of the PRW for bulking agent of commercial surimi was not significantly different compared to that prepared with the original commercial surimi.

Kinetic and Energetic Parameters of Carob Wastes Fermentation by Saccharomyces cerevisiae: Crabtree Effect, Ethanol Toxicity, and Invertase Repression

  • Rodrigues, B.;Peinado, J.M.;Raposo, S.;Constantino, A.;Quintas, C.;Lima-Costa, M.E.
    • Journal of Microbiology and Biotechnology
    • /
    • v.25 no.6
    • /
    • pp.837-844
    • /
    • 2015
  • Carob waste is a useful raw material for the second-generation ethanol because 50% of its dry weight is sucrose, glucose, and fructose. To optimize the process, we have studied the influence of the initial concentration of sugars on the fermentation performance of Saccharomyces cerevisiae. With initial sugar concentrations (S0 ) of 20 g/l, the yeasts were derepressed and the ethanol produced during the exponential phase was consumed in a diauxic phase. The rate of ethanol consumption decreased with increasing S0 and disappeared at 250 g/l when the Crabtree effect was complete and almost all the sugar consumed was transformed into ethanol with a yield factor of 0.42 g/g. Sucrose hydrolysis was delayed at high S0 because of glucose repression of invertase synthesis, which was triggered at concentrations above 40 g/l. At S0 higher than 250 g/l, even when glucose had been exhausted, sucrose was hydrolyzed very slowly, probably due to an inhibition at this low water activity. Although with lower metabolic rates and longer times of fermentation, 250 g/l is considered the optimal initial concentration because it avoids the diauxic consumption of ethanol and maintains enough invertase activity to consume all the sucrose, and also avoids the inhibitions due to lower water activities at higher S0 .