• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.789-798
• /
• 2020

This paper considers the development of the dynamic analysis model and simulation-based operation safety estimation of A-Frame to be applied to the test evaluation support vessel for real sea test. The support vessel will be manufactured by modifying the existing offshore support vessel. Also, development and installation of various sensors and supporting facilities for test evaluation are under preparation. Among these facilities, A-Frame is an equipment that transfers marine equipment from ship deck to the sea floor, and is being designed to transfer up to 50 ton class equipment. However, the A-Frame is a moving equipment using hydraulic cylinders. When the 50 ton equipment is attached and transferred to A-Frame, the buckling of cylinders may occur or A-Frame becomes inoperable due to the influence of huge inertia. For this reason, safety verification should be performed using dynamic analysis techniques that can take into account huge inertia forces in the design of A-Frame. Therefore, in this study, A-Frame and ship behavior were modeled using dynamic analysis method, and the applied loads of various equipment including hydraulic cylinder of A-Frame was measured and the operation safety review was performed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.19
• /
• pp.8095-8099
• /
• 2014

Background: Worldwide, over half a million women died of breast cancer in 2011 alone. Mammography screening is associated with a reduction of 20 to 35% in breast cancer mortality. The aim of this study was to determine the awareness and practice of mammography screening and predictors of its uptake in Malaysian women attending a primary care clinic. Materials and Methods: A cross-sectional study was carried out among women aged 40 to 74 years attending a primary care clinic in Selangor, Malaysia. An assisted structured questionnaire included questions on socio-demography, source of information and level of knowledge. An adapted version of the revised Champion Health Belief Model Scale plus other associated factors for mammography screening up-take were also included as part of the questionnaire. Predictors for mammography screening uptake were only determined in those who were aware about mammography screening. Significant predictors were determined by logistic regression. Results: 447 women were recruited for this study; 99.1% of them (n: 411) were aware about breast cancer. Only 50.1% (n: 206) had knowledge about mammography screening. Prevalence of clinical breast-examination (CBE) was 23.3% (n: 104) and mammography screening up-take was 13.2% (n: 59). The predictors for the latter were those who have had clinical breast-examination (aOR=17.58, 95%CI: 7.68-39.82) and those aged between 50 to 59 years (aOR=3.94, 95%CI: 1.61-9.66) as well as those aged 60 years and above (aOR=6.91, 95%CI: 2.28-20.94). Good knowledge and positive beliefs about mammography screening were not associated with mammography screening uptake. Conclusions: Half of our Malaysian women were aware about mammography screening. However, the uptake of mammography was low. Previous CBE and older age were significant predictors of mammography screening uptake. Increasing CBE services may increase compliance with guidelines.

• Food Science of Animal Resources
• /
• v.37 no.5
• /
• pp.752-763
• /
• 2017

Marine fish skin peptides (FSP) have been widely studied due to their antioxidant and antimicrobial properties. We aimed to use a natural antioxidant, FSP, to replacing synthetic preservatives in a pork patty model, which is safer for human body. Moreover, nano-liposome technology can be applied for masking the fishy smell and improving the stability of this peptide. Therefore, in this study, the effects of FSP and FSP-loaded liposomes (FSPL) on pork patty were evaluated through the tests of thiobarbituric acid reactive substances (TBARS), color, cooking loss, texture, volatile basic nitrogen (VBN), and the pH value, during 14 d of refrigerated ($4^{\circ}C$) storage. The results showed that all FSP-treated patties had lower TBARS values than control patties, which indicated an inhibitory effect of FSP on lipid oxidation. This effect in the patties depended on the FSP concentration. However, FSPL-treated patties showed significantly higher and undesirable TBARS values compared to the control, and this effect depended on the FSPL concentration. None of the physicochemical results showed remarkable changes except the pH and VBN values. Therefore, this study provides evidence that FSP has great potential to inhibit the lipid oxidation of pork patties and is capable of maintaining the quality and extending the shelf life. However, it is necessary to study the application of FSP treatments greater than 3% to improve the antioxidant effect on pork patties and search for other coating materials and technology to reduce the drawbacks of FSP.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.102-115
• /
• 2014

In the Ulleung basin in the East Sea of Korea, it is assumed that huge amounts of gas hydrate(GH) are buried. In 2010, drilling operation was performed at the 2nd Ulleung Basin Gas Hydrate Drilling Expedition(UBGH2) to designate a site for field production test. In this study, based on the field production test site model reflecting geological properties, GH dissociation flow interpretation is analyzed and sensitivity analysis is performed to gain understanding of production behavior properties following bottomhole pressure(BHP) variation by using the numerical simulation. The results of this study provide a basis for the preliminary analysis of field production test site.

• Journal of Environmental Science International
• /
• v.14 no.11
• /
• pp.1015-1026
• /
• 2005

The southeastern coastal area of the Korean peninsula has a complex terrain including an irregular coastline and moderately high mountains. This implies that mesoscale circulations such as mountain-valley breeze and land-sea breeze can play an important role in wind field and ocean forcing. In this study, to improve the accuracy of complex coastal rind field(surface wind and sea surface wind), we carried out the sensitivity experiments based on PBL schemes in PSU/NCAR Mesoscale Model (MM5), which is being used in the operational system at Korea Meteorological Administration. Four widely used PBL parameterization schemes in sensitivity experiments were chosen: Medium-Range Forecast (MRF), High-resolution Blackadar, Eta, and Gayno-Seaman scheme. Thereafter, case(2004. 8. 26 - 8. 27) of weak-gradient flows was simulated, and the time series and the vertical profiles of the simulated wind speed and wind direction were compared with those of hourly surface observations (AWS, BUOY) and QuikSCAT data. In the simulated results, the strength of rind speed of all schemes was overestimated in complex coastal regions, while that of about four different schemes was underestimated in islands and over the sea. Sea surface wind using the Eta scheme showed the highest wind speed over the sea and its distribution was similar to the observational data. Horizontal distribution of the simulated wind direction was very similar to that of real observational data in case of all schemes. Simulated and observed vertical distribution of wind field was also similar under boundary layer(about 1 km), however the simulated wind speed was underestimated in upper layer.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.5 s.149
• /
• pp.560-567
• /
• 2006

FPSO and shuttle tanker are connected to each other by a mooring hawser and a loading hose through which cargo oil is off-loaded. Even in mild sea-state. environmental loads can cause unstable large drift motions between two vessels in tandem off-loading operations, which may result in collision incidents. Accordingly. the analysis on the relative motion between two vessels due to the environmental loads should be investigated in initial design stage. In this study, the low speed maneuvering equation is employed to simulate nonlinear motions of FPSO and shuttle tanker. Low frequency wave drift forces including hydrodynamic interactions between two vessels are evaluated by near field approaches. Current loads are determined by mathematical model of MMG and wind loads are calculated by employing the wind spectrum according to the guidelines of API-RP2A. Mooring forces produced by turret mooring lines and a flexible hawser are modeled quasi-statically by catenary equations. The effect of environmental loads that affect nonlinear motion is investigated through variation in their magnitudes and the nonlinear motions between FPSO and shuttle tanker are simulated under wave, current and wind in time domain.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.51-62
• /
• 1998

In this paper, a CAD/CAM system for 5-axis machining of model propeller is introduced. This system has been developed under the environment of personal computer and Windows NT. In order to enhance the productivity, existing text-based design S/W was integrated into this graphic-based system. Non-Uniform Rational B-Spline method is used to represent the sculptured surface of propeller blades and hub using point data, and surface blending between blade and hub is realized in this system. For 5-axis machining of sculptured surface, tool/work collision and interference are checked and inverse kinematic analysis is performed to make NC data. In addition, tool and workpiece are animated on the PC monitor by preparing NC verification module. Finally, optimal cutting conditions are determined empirically and those cutting conditions are integrated into this S/W so that the whole process from design to machining can be done automatically.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.69-73
• /
• 2009

The objective of this study was to obtain a better understanding of the delayed hydride cracking (DHC) of Zr-2.5Nb alloy. The DHC model has some defects: first, it cannot explain why the DHC velocity (DHCV) becomes constant regardless of an applied stress intensity factor, even though the stress gradient is affected by the applied stress intensity factor at the notch tip. Second, it cannot explain why the DHCV has a strong dependence on the method of approaching the test temperature by a cool-down or a heating-up, even under the same stress gradient, and third, it cannot predict any hydride size effect on the DHC velocity. The DHC tests were conducted on Zr-2.5Nb compact tension specimens with the test temperatures reached by a heating-up method and a cool-down method. Crack velocities were measured in hydrided specimens, which were cooled from solution-treatment temperatures at different rates by being furnace-cooled, water-quenched, and liquid nitrogen-quenched. The resulting hydride size, morphology, and distributions were examined by optical metallography. It was found that fast cooling rates, which produce very finely dispersed hydrides, result in higher crack growth rates. This different DHC behavior of the Zr-2.5Nb tube with the cooling rate after a homogenization treatment is due to the precipitation of the $\gamma$-hydrides only in the water-quenched Zr-2.5Nb tube. This experiment will provide supporting evidence that the terminal solid solubility of a dissolution (TSSD) of $\gamma$-hydrides is higher than that of $\delta$-hydrides.

• Korean Journal of Environmental Biology
• /
• v.29 no.4
• /
• pp.312-320
• /
• 2011

In order to estimate a better methodological factor to understand phytoplankton ecology between abundance and bio-volume of phytoplankton, each 1,160 phytoplankton data, including abundance, classification and chlorophyll $a$ concentration were collected in Korean coastal waters of Incheon (Yellow sea), Tongyeong (South sea), and Ulsan (East sea). Based on these data, phytoplankton bio-volume can be calculated through a geometric model. The correlation coefficient between abundance and chlorophyll $a$ concentration was higher than the coefficient between biovolume and chlorophyll $a$ concentration, because a small size phytoplankton has relatively dense chlorophyll contents compared with the proportion of chlorophyll in a large size phytoplankton. Thus, the interpretation using abundance to understand phytoplankton ecology in Korean coastal waters may be more effective than that using bio-volume.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.1
• /
• pp.1-17
• /
• 2014

Temporal variations of optical properties of urban aerosol in Seoul were estimated by the Optical Properties of Aerosols and Clouds (OPAC) model, based on hourly aerosol sampling data in Seoul during the year of 2010. These optical properties were then used to calculate direct radiative forcing during the study period. The optical properties and direct radiative forcing of aerosol were calculated separately for four chemical components such as water-soluble, insoluble, black carbon (BC), and sea-salt aerosols. Overall, the coefficients of absorption, scattering, and extinction, as well as aerosol optical depth (AOD) for water-soluble component predominated over three other aerosol components, except for the absorption coefficient of BC. In the urban environment (Seoul), the contribution of AOD (0.10~0.12) for the sum of OC and BC to total AODs ranged from 23% (spring) to 31% (winter). The diurnal variation of AOD for each component was high in the morning and low in the late afternoon during the most of seasons, but the high AODs at 14:00 and 15:00 LST in summer and fall, respectively. The direct negative radiative forcing of most chemical components (especially, $NO_3{^-}$ of water-soluble) was highest in January and lowest in September. Conversely, the positive radiative forcing of BC was highest in November and lowest in August due to the distribution pattern of BC concentration.