• Journal of Navigation and Port Research
• /
• v.40 no.1
• /
• pp.43-50
• /
• 2016

Amid of the logistics hub center competition is going to intensifying between the world major port, it is essential to pre-occupied the base in the logistics hub world take advantage of advanced technology of logistics equipment than other ports. In existing container terminal, when container moves the terminal use the omnidirectional and directional antenna in order to exchange data information on the basis of 802.11 wireless network system. Case of loading height of exceeding, the blind sport will occur and a limited frequency channel can't help using in the area. A limited frequency channel usage and nested areas happen to use the closed terminal, it has a great influence to operate the terminal working. In this paper, LTE network is configured provided by the specified company ('L' Corp,.Ltd) and terminal data extracted through LBO (Local Breakout) in the cell site which is configured directly with container terminal operation server. Using this method, container terminal yard equipment operate without overlapping arises with uninterrupted data presented for ways to efficiently. I would suggest both the existing wireless AP LAN configuration of container terminal and new LTE system and applied to the real yard operating devices situations. Through these methods presented comparative the existing network traffic with new constructed LTE configuration. I admired to suggest that wireless network LTE introduction is fundamental factors to get rid of the blind spot, the problem of limited frequency channel and overlapping arises. These essential points can be a continual improving terminal services and more efficient terminal operational management.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.213-220
• /
• 2010

Following the application of Formal Safety Assessment(FSA) to bulk carriers, crude oil tankers and large passenger ships, an urgent need to consider the safety of general cargo ships has recently been raised through the International Maritime Organization(IMO)(IMO, 2006a), and related FSA studies are being carried out by International Association of Classification Societies(IACS) as a preparatory work for the discussion on the issue of general cargo ship safety in the IMO committee. FSA is a structured and systematic methodology which is based on the techniques of risk analysis and cost benefit assessment to assist in the decision-making process, and aims at enhancing maritime safety, including protection of life, health, the marine environment and property. FSA can be used as a tool to facilitate the development of regulatory changes equitable to the various parties, with a view to aiding the achievement of consensus, and to help in the evaluation of new regulations and in making a comparison between existing and possibly improved regulations(IMO, 2007). This study aims at verifying the usefulness of FSA methods as a tool to conduct a safety assessment of general cargo ships flying the Korean flag, and providing useful information on 'the safety of general cargo ships' for IMO committee's discussion on the matter at a future session. FSA comprises five steps, however, steps 1(Hazard identification) and 2 (Risk analysis) from the FSA study for the Korean-flagged general cargo ships are discussed in this paper.

• Korean Journal of Ichthyology
• /
• v.29 no.2
• /
• pp.146-150
• /
• 2017

Length and weight relationship (LWR) for dominant Antarctic fishes was determined in two species of the family Nototheniidae; black rockcod (Notothenia coriiceps) and marbled rockcod (Notothenia rossii). Samples were caught in the offshore sea around King Sejong station located on King George Island, Antarctica in January, 2017. A total of 30 N. coriiceps and 7 N. rossii were caught by fishing rod and hook. Average total length was 266.0 mm for N. coriiceps and 275.4 mm for N. rossii. Average total weight was 283.1g for N. coriiceps and 290 g for N. rossii. In terms of LWR and b value, the results showed that both two species had positive allometries (b>3) in good health. This size information of two dominant Antarctic fishes would be useful for future physiological studies to understand of adaptation mechanism and biological pathway of Antarctic marine organisms.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.6
• /
• pp.528-538
• /
• 2011

As a forming method for curved hull plates more efficient than the flame bending, mechanical bending using multi point press forming and die-less forming is discussed in this paper. the mechanical forming is a flexible manufacturing system for automatically forming of hull parts. It is especially suited to varied curved parts. This paper discusses a multiple point pressing machine composed of a pair of reconfigurable punches in order to achieve the rapid forming of curved hull plates using division forming and presents how forming information is obtained from the given design surface. Although the mechanical forming can be efficient in the metal forming, spring back after pressing is a phenomenon which must be carefully considered when quantifying the process variables. If the spring back is not accurately controlled, the fabricated shell plate cannot meet assembly tolerance. This paper describes the principles to calculate the proper stroke of each punch at the divided areas. the strokes are determined by an iterative process of sequential pressing and spring back compensation from an unfolded flat shape to its given design surface. FEA(finite element analysis) is used to simulate the spring back of the plate and the IDA(iterative displacement adjustment) method adjusts the offset of pressing punches from the deformation results and the design surface. The shape deviations of two surfaces due to spring back are compensated by integrated system using FEA and IDA method. For the practical application, It is aimed to develop an integrated system that can automatically perform the compensation process and calculate strokes of punches of the double sides' reconfigurable multiple-press machine and some experimental results obtained with mechanical bending are presented.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.807-812
• /
• 2007

With the advent of Electronic Chart Display and Information Systems(ECDIS) and Automatic Identification Systems (AIS) as the principal navigation equipment of E-navigation strategy, mariners will begin to practice "e-navigation" and increasingly rely upon these systems to navigate safely and efficiently. However, these electronic systems require "e-inputs" in order to function. At present, the choices for e-input are limited, and they are installation dependent. This means that the mariner must be suitably equipped in order to use an alternative e-input. If the primary e-input is lost, and the vessel is not equipped to make use of suitable alternative e-inputs, then continued operations will have to be done the "old fashioned way" using conventional navigation The final objective is a recommendation of dual harbor positioning system on the most appropriate mix of positioning systems to satisfy the marine needs for radionavigation, positioning services.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.401-407
• /
• 2013

In parallel with the development of ship equipment, bridge systems have been improved, but marine accidents due to human error have not been reduced. Recently, research in nautical bridge equipment has focused on suitable ergonomic designs in order to reduce these errors due to human factors. In a bridge of a ship, there are numerous auditory signals that deliver important information clearly to the sailors. However, only a few studies have been conducted related to the human recognition of these auditory signals. There are three types of auditory signals: voice alarms, abstract sounds, and auditory icons. This study was conducted in order to design more appropriate auditory icons using a sensibility evaluation method. The auditory icons were rated to have five warning situations (engine failure, fire, steering failure, low power, and collision) using the Semantic Differential Method. It is expected that the results of this study will be used as basic data for auditory displays inside bridges and for integrated bridge alarm systems.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.415-422
• /
• 2010

Development of the reliability-based design program in the GUI environment is inadequate for engineers familiar with the deterministic design to deal with the international design criterion based on the probabilistic design. In this study, the design program based on the GUI environment is developed in order to more efficiently input the design factor and more easily carry out the design works. The GUI environment is the GUIDE (Graphic User Interface Development Environment) tool supported by the latest MATALB version 7.1. In order to test the model reliability, the probabilities of failure (POF) on the breakwater armor block (AB) and gravity quay-wall (QW) in the sliding mode are computed using the model in the Level II and Level III. The POF are 55.4~55.7% for breakwater AB and 0.0006~0.0007% for gravity QW. A non-GUI environment program results of the POF are 55.6% for breakwater AB and 0.0018% for gravity QW. In comparison, the POF difference is negligible for breakwater AB because the exact input design parameters are available, whereas the large POF difference, but within the same order, for gravity QW can be explained by the difference of the input design factors because of the poor input data information.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.627-635
• /
• 2013

This study examines the issue of causality between ocean industries and urban economic growth in the sea port city. To maximize economic advantage of Busan as a sea port city, we first need to analyze the effects of ocean industries on urban economic growth. This study focuses on the examination of the role of ocean industries and its related variations in economic growth at the urban level. Using data from Busan. Metropolitan City in Korea during 1985-2011, we find that the causality link between ocean industries and urban economic growth rates runs in both directions. Especially, industries of shipping/port, marine tourism, and shipbuilding were the most important variables in Busan economy. With this information, the empirical results show that ocean industries and its related variations have significant effects on urban economic growth. Based on these significant research findings, theoretical and practical implications were discussed.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1103-1109
• /
• 2002

Mean concentration and daily intake of sorbic acid were estimated through the analysis of food samples obtained from Korea FDA and food sanitation inspection agency during $1999{\sim}2000$. Total number of samples were 14,129, among which the number of detected samples were 2,561 (detection rate was 18.13%). Contribution rate to total estimated daily intake (%) of sorbic acid in the categorized food were the highest in processed fish product. Total estimated daily intake $({\Sigma}EDI)$ for age groups were the highest in $30{\sim}49$ years old and ranged from 3.42 to 9.25 mg/person/day. Estimation of average food intake for each food item per person per day was based on data in national nutrition survey and national food disapperance data in 1998. Total estimated daily intake of sorbic acid was 20.40 mg per body weight of 55 kg. This value was 1.48% of acceptable daily intake evaluated by FAO/WHO and 33.03% of theoretical maximum daily intake.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.435-444
• /
• 2009

In the case of oil spill accident at sea, information concerning the movement of spilled oil is important in making response strategies. Aircrafts and the satellites have been utilized for monitoring of spilled oil. In these days, numerical models are using to predict the movement of the spilled oil. In the future a coupling method of modeling and remote sensing data should be needed to predict more correctly the spilled oil. The purpose of this paper is to present an application of satellite image data to an oil spill prediction model as an initial condition. Environmental Fluid Dynamics Computer Code (EFDC) was used to predict the movement of the oil spilled from Hebei Spirit incident occurred in Taean coastal area on December 7,2007. In order to make the model initial condition and to compare the model results, two satellite images, KOMPSAT-2 MSC and ENVISAT ASAR obtained on December 8 and 11, were used during the period of the oil spill incident. The model results showed an improvement for the prediction of the spilled oil by using the initial condition deduced from satellite image data than the initial condition specified at the oil spill incident site in the respects of the distributed spilled area.