• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.90-95
• /
• 2015

This paper proposes the new adaptive gain control monitoring sensor for the marine IT system. The marine IT system sensors make it possible to conduct search missions, record climate changes, provide pollution control, study marine life, conduct survey missions, tactical surveillance, and predict natural disturbances in the ocean. In this paper, the adaptive gain control circuit which changes its parameters according to the ambient noise situation for obtaining the precise location information of marine IT system sensor is developed and analyzed. The performance characteristics for ensuring the precise location information of marine system sensor is presented and analyzed. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably excellent performance for the monitoring of the marine system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1814-1819
• /
• 2005

This paper describes the development of a Stewart platform-based robot force sensor with distinctive structure of ball joints. The number of ball joints is only a half of the similar style sensors, so it is possible to reduce size and weight of the sensor. The structure of ball joint is described and discussed. Furthermore, we use strain gauges, but not liner voltage differential transformers, as sensing elements, in order to reduce size and weight of the sensor. It is also proposed that beams are replaced with pipes as sensing elements of the sensor. The ball joints and sensing elements with pipes can effectively reduce the error of the sensor. A geometric analysis model is also proposed. The external force and its moment can be measured with this model. Moreover, the performance of this sensor was tested. The test results conducted to evaluate the sensing capability of the sensor is reported and discussed.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.234-235
• /
• 2012

In this paper, sensor network for toxic gas detecting on shipboard has been implemented. Sensor node were used Zigbee Technology. $Co_2$ gas is used as toxic gas, it was designed a sensor device for detecting. This sensor was detected a toxic gas, and send data to monitoring system on PC.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권5호
• /
• pp.641-647
• /
• 2003

The use of infrared range-finder sensor as the environment recognition system for mobile robot have the advantage of low sensing cost compared with the use of other vision sensor such as laser finder CCD camera. However, it is not easy to find the previous works on the use of infrared range-finder sensor for a mobile robot because of the non-linear characteristic of that. This paper describes the error due to non-linearity of a sensor and the correction of it using neural network. The neural network consists of multi-layer perception and Levenberg-Marquardt algorithm is applied to learning it. The effectiveness of the proposed algorithm is verified from experiment.

• International Journal of Advanced Culture Technology
• /
• 제8권3호
• /
• pp.269-274
• /
• 2020

It has used buoy for efficient domestic farm operations and fishermen fish. Buoy uses IoT-based communication to transmit water temperature, salinity, humidity, wind speed, etc. to fishers in real time. In this paper, we utilize LoRa, which enables communication in the marine environment, to construct a network and apply it to an actual buoy for monitoring. The implemented LoRa uses the 900MHz band to configure the network. The sensor consisted of a sensor that can monitor the atmospheric environment and a sensor that can monitor the marine environment. In addition, the information received in real time will be provided to the fishing village host. The fishermen were fully aware of this and took appropriate measures to conduct sea trials.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.405-410
• /
• 2016

Elevator industry is a field that is mechanical, electrical and electronic technology and constantly requires inspection and maintenance considering various applications and various types. Recently, various elevator control and monitoring technologies with IT are developing for elevators on land. But technologies with IT have been hardly done in marine elevator that is consistently assured safety and reliability of life cycle for its parts in poor environment. In this paper, we implemented embedded main controller, floor controller and car controller that meet the requirements and use NMEA network protocol by analyzing home and abroad integrated elevator operation and management systems. Especially, we secured reliability of maintenance by real-time fault diagnosis and control that was implemented with limit switch, gyro sensor, temperature/humidity/barometric pressure sensor and fire detection sensor thinking over the environmental conditions of terrestrial and marine elevator.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.136-145
• /
• 2009

There are two purposes for the marine structures used for fossil fuel: transporting huge amounts of crude oil and petroleum products and producing petroleum resources on the ocean in an isolated operational environment. Both types of structures are exposed to dangerous situations by sea conditions. Such marine structures are greatly affected by ocean climate conditions and its changes. Because of such ocean climate changes, it has been necessary to monitor marine structures. This research discusses the difficulties with adopting a new methodology based on a ubiquitous sensor network and develops an optimized sensor network management system design for a marine structure.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.119-120
• /
• 2012

In the various industry plant, it need a condition monitoring system for an active machine that used an detachable wireless sensors. In this paper, IEEE802.15.4 standard based detachable wireless sensor monitoring system configure results will be introduced.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.135-141
• /
• 2016

Recently, the needs for the development and application of marine robots are increasing as marine accidents occur frequently. However, it is very difficult to acquire the information by utilizing marine robots in the marine environment. Therefore, the needs for the researches of sensor networks which are composed of underwater, surface and aerial robots are increasing in order to acquire the information effectively as the information from heterogeneous robots has less limitation in terms of coverage and connectivity. Although various researches of the sensor network which is based on marine robots have been executed, all of the underwater, surface and aerial robots have not yet been considered in the sensor network. To solve this problem, a collaborative control method based on the acoustic information and image by the sonars of the underwater robot, the acoustic information by the sonar of the surface robot and the optical image by the camera of the static-floating aerial robot is proposed. To verify the performance of the proposed method, the collaborative control of a MUR(Micro Underwater Robot) with an OAS(Obstacle Avoidance Sonar) and a SSS(Side Scan Sonar), a MSR(Micro Surface Robot) with an OAS and a BMAR(Balloon-based Micro Aerial Robot) with a camera are executed. The test results show the possibility of real applications and the need for additional studies.

• 한국항해학회지
• /
• 제12권2호
• /
• pp.33-42
• /
• 1988

As a basic study for enhancing the sensitivity of the follow-up system of the marine gyrocompass, the geometric characteristics of the deflection sensor were investigated and the theoretical model of it was formulated. The output signal voltage of the deflection sensor was esamined by changing the attitude of gyrosphere against follow-up container. The characteristics of the output are found to be indentical with those of the distance difference versus the relative azimuthal deflection of the gyrosphere against the follow up container. On the base of the theoretical model, some useful points for the design of the deflection sensor are suggested as following : 1. When the difference between semidiamter of gyrophere and that of the follow-up container decreases, the sensitivity of deflection sensor increases. 2. If the semidiameter difference of two spheres is constant, the sensitivity of deflection sensor is proportional to the magnitude of the semidiamter of each sphere. 3. The farther the gyrosphere is deviated from the center of follow-up container, the higher the sensitivity of deflection sensor is. 4. It is recommendable that the value of the datum deflection of the electrodes on the gyrosphere should be within the range between $4^{\circ}$ and $16^{\circ}$deviated from north-south line.