• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.883-887
• /
• 2016

This study aims to evaluate the corrosion behavior of a newly developed high-strength steel in marine environments. Metals used in seawater are easily deteriorated because of the presence of corrosive species such as chloride ions in it. Seawater causes much higher corrosion than fresh water. Thus, the corrosion of steel in marine environment has been recognized as a crucial problem in designing structures which cannot be cathodically protected. In this study, the corrosion resistance of a newly developed high-strength steel was evaluated. Four different specimens were tested to confirm the corrosion resistance. The exposure corrosion test was carried out by exposing the specimens to different marine environments such as atmospheric, tidal, splash, and submerged zones for two years. The specimens taken out from each location were cleaned ultrasonically and chemically prior to the evaluation of their corrosion resistance by the weight loss method. Finally, the pitting depth of the specimens was also measured to evaluate their pitting corrosion. The conditions used for the corrosion test were similar to the environmental conditions. The corrosion test results revealed that the corrosion rate and pitting corrosion of the newly developed high-strength steel was lower than that of the other carbon steels.

• Journal of Power System Engineering
• /
• v.18 no.2
• /
• pp.12-18
• /
• 2014

The local heat transfer of developed turbulent flows in the stationary ribbed rectangular convergent channels has been investigated experimentally. The rectangular convergent channels with one ribbed surface only have the inclination of $0.72^{\circ}$ and $1.43^{\circ}$ at which the ribbed wall is manufactured with a fixed rib height (e) of 10 mm and the ratio of rib spacing (p) to height (e) =10. The measurement was conducted within the range of Reynolds numbers from 15,000 to 89,000. The local heat transfer characteristics of the rectangular convergent channels are quite different from those of the ribbed square straight channel.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.26-26
• /
• 2011

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.5
• /
• pp.389-396
• /
• 2016

The theory of Fourier heat conduction predicts accurately the temperature profiles of a system in a non-equilibrium steady state. However, in the case of transient states at the nanoscale, its applicability is significantly limited. The limitation of the classical Fourier's theory was overcome by C. Cattaneo and P. Vernotte who developed the theory of non-Fourier heat conduction in 1958. Although this new theory has been used in various thermal science areas, it requires considerable mathematical skills for calculating analytical solutions. The aim of this study was the identification of a newer and a simpler type of solution for the hyperbolic partial differential equations of the non-Fourier heat conduction. This constitutes the first trial in a series of planned studies. By inspecting each term included in the proposed solution, the theoretical feasibility of the solution was achieved. The new analytical solution for the non-Fourier heat conduction is a simple exponential function that is compared to the existing data for justification. Although the proposed solution partially satisfies the Cattaneo-Vernotte equation, it cannot simulate a thermal wave behavior. However, the results of this study indicate that it is possible to obtain the theoretical solution of the Cattaneo-Vernotte equation by improving the form of the proposed solution.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.160-161
• /
• 2022

Hydrogen is bridge fuel with high energy content and environmentally friendly to satisfy the stringent IMO regulation relating to greenhouse gas (GHG) emissions. There is growing interest in hydrogen in numerous nations and regions illustrated by an extensive range of research and development in technology. Regarding maritime applications, researchers have recognized the utilization of hydrogen as a fuel for fuel cells, a device that converts the chemical energy of the fuel to electrical energy. Solid oxide fuel cell (SOFC), with high working temperature, is easy to combine with the waste heat recovery cycles/devices to increase output power and thermodynamic performances as well. Furthermore, the cold energy from liquid hydrogen supplied to SOFC can also be used to generate more power. In this study, we proposed a SOFC integrated system with the idea of combining the waste heat recovery from the SOFC exhaust stream and cold energy utilization from LH₂. The designation is aimed to target small-scale vessel which uses electric propulsion for short distances voyage.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.744-750
• /
• 2014

The monitoring and abnormality warning of marine diesel engine are important to take appropriate responses for safety navigation. If maintenance engineers do not take appropriate response because of diagnosis mistakes, it will occur a nasty accident. Therefore, we need integrated monitoring and diagnosis system for supporting a diagnosis objectively. In this paper, we analyze time-series data which measured by real-time, monitor the changing of conditions and trends of the analyzed data. Furthermore, we design and implement a monitoring and diagnosis system for objective supporting of real-time diagnosis. When the integrated monitoring and diagnosis system is adopted, it can help to improve stability of marine diesel engine by providing abnormality warning alarm with appropriate responses.

• IE interfaces
• /
• v.23 no.2
• /
• pp.126-138
• /
• 2010

Marine equipment makers today face a multitude of challenges including the needs of an internal system for easy management of their business processes and a collaboration system to streamline communications with the parent company, increasing product complexity and heightened requirements for information technology. In this research, a BPM-ERP system called Biz $Tower^{(R)}$ was implemented based on cloud computing for especially, small and medium marine equipment makers to standardize and visualize the entire business process from order placement to release. This system also provides their parent company with visibility into the status of orders and user can easily access the system on the web at a low price through cloud computing service. Thus far, this paper demonstrates the applicability of Biz $Tower^{(R)}$ to improve management visibility, process performance, and collaboration with the parent company for small and medium marine equipment makers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.275-284
• /
• 1998

Standard on the carbon dioxide extinguishing system was prepared by the committed of the national fire protection assocition(NFPA)in USA on 1980. And this code is also applied to the design of a marine fire extinguishing system The most important problem in design is the uniform discharge of $CO_2$ through each nozzle from the high pressure $CO_2$ storage facility. The purpose of this paper is to develop the computer software to design the marine fire protection piping system. By solving the continuity equation energy equation and Bernoulli's equation simulataneously the flowrate in branch pipelines and discharge nozzles can be calculated.

• Journal of Korean Society for Quality Management
• /
• v.35 no.3
• /
• pp.66-74
• /
• 2007

Organizations worldwide make efforts to develop their management systems for business functions. The representatives of management systems include quality management system(QMS), environmental manage ment system(EMS) and occupational health and safety management system(OHSMS). Implementing EMS and/or OHSMS in addition to QMS requires the integration of separate management systems in alignment with the organization's strategies and goals. Through the questionnaire survey on Korean marine equipment enterprises, this paper deals with the operational practices of management systems and analyzes perceptions about integrated management system(IMS). We found out the degree of perception is not sufficient enough to prepare background for IMS in Korean marine equipment enterprises. The results contribute to solid understanding and successful implementation of IMS.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.532-539
• /
• 2010

The high tech marine transportation infrastructure is an innovative transportation infrastructure that may be able to secure a safe transportation environment as well as efficient operation by connecting up-to-date skills including a broad range of wire and wireless communication-based information, control and electronics technologies. When integrated into the marine transportation infrastructure by the standard requirements, these standard technologies help monitor and manage navigational aids. After investigated on current status of marine transportation system, verified on integrating marine transportation systems, the standard requirements have to suggest a appropriate way of integrating marine traffic systems and proper way of using old marine traffic infrastructure.