• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2007

Using field observations, this study estimated the total weight and types of marine debris along the coast of Jinu Island in the Nakdong River Estuary after typhoons Usagi and Nari had passed. A numerical wave model was used to calculate the spatial wave height distribution at the time of the typhoons' passage. This study found that the total accumulation rate of marine debris deposited on the coast after the two typhoons had passed was about $5,769.86\;kg/km^2/day$ at this site, which was 14.42 times as high as that in normal weather. The wave height distribution in the sea off Jinu Island, based on numerical modeling, was $4.1{\sim}3.5\;m$, which was 1.0-2.5 times greater than for the case of other islands. Therefore, it is likely that the concentration of wave energy led to the deposition of marine debris.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.3-9
• /
• 2002

When a flooding a lot of debris are drained from rivet. Drained debris separated lodgement debris and floating debris, and floating debris moving other region by wind and ocean current. This experimentation throw three buoys which installed with DGPS and other devices in nak-dong river, and check there location every minute. In consequence of this experimentation, floating debris drained nak-dong river are gathered near Dadaepo seaside or drifted Dong hae. Ocean current and wind driven current are largely influenced then tide. Numerical analysis calculated by MAPCNTR(develop by KRISO) is similar to the result of this experimentation.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.15-21
• /
• 2007

Using field observations, this study estimated the total weight and types of marine debris along the coast of Jinu Island in the Nakdong River Estuary after typhoons Usagi and Nari had passed. A numerical wave m며el was used to calculate the spatial wave height distribution at the time of the typhoons' passage. This study found that the total accumulation of marine debris deposited on the coast after the two typhoons had passed was about $5,769.86kg/day/km^2$ at this sitε which was 14.42 times more than during normal weather. The wave height distribution in the sea off Jinu Island, based on numerical modeling， was $4.1^{\sim}3.5$ m, which was 1.0-2.5 times greater than for the case of other islands. Therefore, it is likely that the concentration of wave energy led to the deposition of marine debris.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.236-243
• /
• 2006

A series of surveys are performed to evaluate the abundance, composition and distribution of marine debris on the sea bed around the Busan port. In order to set up a master plan for the marine environmental pollution the relevant maritime authority must understand how many and w㏊t kinds of marine litters are distributed on the sea bed. At first we planed to survey areas divided regularly according to the coast line but there were many sea going vessels and fishing boats. So we selected and surveyed the around area where there were no sea going vessels or fishing boats.The obtained results are as follows: 1. The mean values of litters in number and weight are 5.8 pieces/㏊. and 3.5㎏/㏊. respectively. 2. The highest density in terms of number are vinyl and plastic item, and in weight are fishing gear and ship articles. 3. The nearer to the shore we surveyed the more we collected in terms of the density of marine litters in number and in weight per hectare. 4. Eel pot, oiled waste, rope, others, other pot and net of fishing gear litters in number were 59.9, 22.7, 7.9, 4.5, 3.1 and 1.9% respectively. 5. There is no relationship between the amount of fish caught and the amount of marine debris.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.171-180
• /
• 2013

Even though styrofoam buoys represent a large portion of beached marine debris in Korea, efficient government actions have been lacking to address them. Three participatory workshops were organized from 2010 to 2012 to develop policy measures to manage styrofoam buoy marine debris. The first workshop held in 2010 was organized in order for workshop participants to understand and share the styrofoam debris issue. Participating stakeholders suggested policy measures to address styrofoam debris through brainstorming in the second workshop in 2011. In the third workshop organized in 2012, the analytic hierarchy process (AHP) was used to set priorities for 16 selected policy measures. A total of 56 people participated in AHP, and answers of 40 participants that passed the consistency test were analyzed. 'Beach cleanup by public works program' ranked highest in priority, followed by 'Development of alternative buoy and aquaculture technologies'. Other research projects also ranked high in priority. Feasibility of policy measures was considered the most important criterion in the priority setting, followed by effectiveness, efficiency, and acceptability. This study demonstrated that participatory workshops in which diverse stakeholders take part in could provide a valuable tool in developing practical policy measures on styrofoam buoy marine debris.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.906-917
• /
• 2022

This study aimed to compare differences according to categories of fishery and marine environmental policies for the (estimated) amount of fishery waste generated by fishing, and to analyze the correlation between associated independent and dependent variables. The independent variables were divided into three dif erent sectors. The first sector included precautionary policies that observed eco-friendly fishing support program, institutional prevention activities, and physical barriers installation. The second sector with the current management policies included the relevant vessel operations, establishment of fishery order, fishery restructuring, and fishery ground clean-up. Thirdly, post-response policies comprised the litter purification from river to shoreline, the collection and removal of marine, sedimentary, and floating debris, purchasing salvaged debris generated while fishing, fishery waste disposal, and repairing damage caused by marine litter. The indicator used was the settlement amount by each program. The dependent variable was the estimated amount of fishery waste and the indicator was the sum of the loss of traps and gill nets and the loss of their appendages. According to the results of Kruskal-Wallis Test, the estimated amount of fishery waste was highest in the East Sea in terms of sea area and the highest in the Si(city) according to basic local municipality. The settlement amount related to the marine environment services was largest in the Gun(county). Further, there were significant differences between Gun(county) and the other regions(Si(city) and Gu(autonomous district)) with respect to most variables. The variables related to the estimated amount of fishery debris were the project purchasing salvaged debris generated while fishing and fishery waste disposal program in the post-response policies.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.642-647
• /
• 2011

In order to analyze the influence of floating marine debris (FMD) in the East China Sea (ECS), a sighting survey was conducted from July 1st to July 14th, 2009 navigating about 966 km using a training vessel "Kaya (1,737 ton)" of Pukyong National University. The sampled zones are divided into 5 transect by observation day during the survey days and again specified with 45 segments per unit hour on the survey routes. The results of distribution of FMD are as follows: 1. The quantities of FMD at the central China Sea(CE) and northern part of Taiwan(NT) were found as total mean of 90.8 ea/hr, 56.7 ea/hr, respectively, and also 36.8 ea/hr, western part of Kyushu district(WJ), 10.7 ea/hr, 8.0 ea/hr, western(OK1) and northern part(OK2) of Okinawa, respectively. 2. Temporal variation of FMD is represented by depicting the sinusoidal curve as shape as tide in CE and OK1. 3. The higher sea surface temperature (SST) is as likely as if Kuroshio current exists strongly, the less quantities are decreased. On the other hand, the coastal zone of ECS and near of Yellow Sea are increased by lower SST.

• Ocean and Polar Research
• /
• v.45 no.3
• /
• pp.125-140
• /
• 2023

We investigated meiofaunal biofouling (40-1,000 ㎛) on stranded marine plastic debris (hereafter MPD) collected from 8 coastal areas highly affected by plastic pollution located in the southern part of Korea during June, 2021, in order to analyze the abundance and composition of MPD associated organisms. A total of eight shapes of MPD was collected and classified into four types of plastics (LDPE, PET, PP and EPS) based on Resin Identification Coding System. Meiofounal biofouling was identified into 35 taxa belonging to 11 phylum, 10 classes and 12 order, and were numerically dominated by harpacticoids (EPS: 21.6%, PP: 27.1%), nematodes (LDPE: 23.2%) and foraminiferans (PET: 29.6%). Surface area of MPD was negatively correlated with abundances of organisms on the plastic debris (r = -0.487, p < 0.05, n = 24), indicating that abundances (avg. 3,225 inds. 0.1 m^-2) on the smallest area of PP debris (avg. 0.0208 m² ) were higher than those (avg. 50 inds. 0.1 m^-2) on the largest area of LDPE debris (avg. 0.4029 m^-2). Whereas, there was no correlation between surface area of MPD and the number of taxa on the debris (r = 0.147, p = 0.49, n = 24). These results showed that higher abundances of meiofaunal biofouling were observed on the PP material debris than those on the other debris collected from eight hot spots of the southern coastal waters in Korea, associated with not only polymer type and surface area of the PP debris, but also possibly surface microstructure of the PP debris.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.1
• /
• pp.58-66
• /
• 2005

Floating debris was observed using a training ship, KAYA, of Pukyong National University with cruising speed of about 10-12 knot during July 12~25, 2003. The area sampled was the East Sea enclosed by 3 nations, namely, Korea, Japan and Russia, and was divided into 68 unit segments on survey routes [Fig. 1]. Debris fabrication materials were categorized with 6 items, e.g., man-made or natural wood items, paper and cardboard, nylon rope, styrofoam, vinyl and plastic, floating metal and glass containers. All identified items within $100{\pm}10 m$ wide band were recorded but ignored if beyond this boundary. The results of this study are as follows: 1. The average numbers of debris per unit area, $1km^2$, were found as 16.3 pieces (items) in the sea. 2. The highest densities of numbers, $32.3pieces/km^2$, were discovered in vicinity of the Oki strait of Japan, area of 'NEK' in Fig. 1. 3. Especially, styrofoam item only was composed to 63.6% of all in the sea of 'SD', located in the southern part of Dokdo Island, Korea. The item seems to be derive from the Southern Sea of Korea. 4. Therefore, comparing the distribution of debris numbers (the results of above 2 and 3) with flow patterns of Kuroshio currents, it was shown that their relation was good agree each other. Further more surveys are being conducted and a much wider coverage can be achieved with other countries, then it can be obtained that the East Sea is polluted to some extent, where is the origin of debris, and the finding of floating routes and stationary sea.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.7
• /
• pp.1044-1051
• /
• 2009

During contact between surfaces, there is wear and the generation of wear. The particles contained in the lubricating oil carry detailed and important monitoring information about the condition of the machine. Therefore, this paper was undertaken for the Ferrography system of wear debris generated from a lubricated moving machine surface. The lubricating wear test was performed under different experimental conditions using the Falex wear test of the Pin and V-Block types by Ti(C,N) coated. It was shown from the test results that wear particle concentration(WPC), wear severity index(Is) and size distribution have come out all higher with increases in sliding friction time. With the Ferrogram thin leaf wear debris as well as ball and plate type wear particles were observed.