• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.447-462
• /
• 1993

To evaluate the marginal leakage in Class V cavity this study has been undertaken to compare the sandwich technique with the conventional method, and find out the effect of lining material, lining method, and polishing time on sandwich technique. Ninty extracted teeth were divided into eight test groups and a control group, and were prepared with a buccal Class V cavity. Four test groups were lined with Dentin Cement whereas the other four test groups were lined with Vitrabond. Half of the either group were lined 0.5mm short of the carvosurface margin and the rest were lined completely to the carvosurface margin. The four subgroups were further divided into specimens which were polished immediately and 24 hours after resin filling. The polished specimens were immersed in $37^{\circ}C$, 0.5% methylene blue solution for 24 hous after thermocycling at $5^{\circ}C$ and $55^{\circ}C$, 200 times and buccolingually sectioned. The sectioned specimens were examined dye penetration under the light microscope. The following results were obtained, 1. At the enamel margin, the conventional method showed a lower microleakage than the sandwich technique. The difference between the control and Vitrabond group was statistically significant(P<0.05), but no difference between the control and Dentin Cement group, and between the lining materials was observed. 2. At the dentinal margin, the sandwich technique showed a significant lower amount of microleakage (P<0.05), but there was no significant difference between the lining materials. 3. Regardless of the lining material, lining method, and polishing time used, values of microleakage were significantly higher at the dentinal margin compared to the enamel margin(P<0.05). 4. In specimens till the cavosurface margin, microleakage at the dentinal margin was less with the light-cured base than with the chemically-cured base, but there was no siginificantly difference between the lining materials regarding the lining method and polishing time. 5. The lining material, lining method, and polishing time did not affect the amount of micro leakage in the sandwich technique(P<0.05).

• Environmental and Resource Economics Review
• /
• v.26 no.4
• /
• pp.499-517
• /
• 2017

The purpose of this article is to show profit margin hedging can be an optimal strategy in crude oil purchasing. This study theoretically analyzes profit margin hedging strategy is optimal in crude oil purchasing using expected target utility function and conducts simulations to show if the profit margin hedging is profitable. In addition, this study tests existence of mean reversion of crude oil futures prices to confirm the theory that profit margin hedging is more profitable than other strategies, such as always hedging or buying at expiration with spot price, if futures prices are mean reverting. The simulation results show that the expected utility of profit margin hedging higher than other strategies. Although we cannot find any evidence that crude oil futures prices follow mean reverting process, we can conclude that profit margin hedging can be optimal strategy in crude oil purchasing based on theoretical proof and simulation results.

• Journal of Chest Surgery
• /
• v.54 no.5
• /
• pp.361-368
• /
• 2021

Background: In general, a 2-cm surgical margin is recommended for limited resection to obtain equivalent oncologic outcomes to lobectomy for lung cancer. This study aimed to examine the patterns of recurrence and prognostic factors for recurrence in patients with a close parenchymal resection margin. Methods: From January 2009 to April 2017, 156 patients with stage I lung cancer who underwent segmentectomy with a close resection margin (<2 cm) were enrolled. Recurrence-free survival and overall survival were assessed. In addition, predisposing factors for recurrence were evaluated. Results: The mean tumor size was 1.7±0.8 cm and the parenchymal resection margin was 1.1±0.6 cm. Recurrence developed in 17 (10.7%) of the 156 patients, and the 5-year recurrence-free survival rate was 88.9%. Distant metastasis (7.7%) was the predominant recurrence pattern. The isolated local recurrence rate was 1.9%. Multivariate Cox regression analysis revealed that age, tumor size, mediastinal lymph node dissection, postoperative complications, and histologic type were significant predisposing factors for recurrence. However, parenchymal margin distance did not significantly affect the long-term prognosis. Conclusion: Segmentectomy with a close resection margin for early-stage lung cancer in selected patients resulted in acceptable recurrence and survival. However, patients with tumors larger than 2 cm, squamous cell carcinoma histology, and insufficient mediastinal evaluation should be carefully followed up for recurrence.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.1
• /
• pp.68-75
• /
• 2013

This paper presents a scheme to improve transient stability using Newton's Approach for generation rescheduling. For a given contingency, the energy margin and sensitivities are computed. The bigger energy margin sensitivity of generator is, the more the generation of the generator effects to the transient stability. According to energy margin sensitivity, the control variables of generation rescheduling are selected. The fuel cost function is used as objective function to reallocate power generation. The results are compared to the results of time simulation to show its the effectiveness.

• Journal of Technologic Dentistry
• /
• v.13 no.1
• /
• pp.5-8
• /
• 1991

There are many factors influence on the margin fitness of Casting body. Among them, I intend to examine the influence of the gap of temperature of investment's special liguid. As the result of investing and experiment of the whole of eighty copings under the classification the temperature of liquid into four groups 0$^{\circ}C$, 10$^{\circ}C$, 20$^{\circ}C$, 30$^{\circ}C$ I came to the conclusion as following. 1. The margin fitness of these four groups, as the result of examination with microscope, was the most accurate at 20$^{\circ}C$ was less aceurate in order of 30$^{\circ}C$, 10$^{\circ}C$, 0$^{\circ}C$. 2. directions is the way to preserve the most exact margin fitness.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.106-108
• /
• 2002

반도체 physical layout design rule이 작아짐에 따라 Proximity effect와 overlay가 Pattern 구현에 크게 영향을 미치고 있다. Metal layer와 contact의 부족한 overlay margin으로 overlay 불량이 발생하고, 감소한 space margin으로 인해 bridge와 같은 문제가 나타난다. 따라서, resolution을 향상시키고, 최소한의 overlay margin을 확보함으로써 미세 pattern의 구현을 가능하게 한다. 이를 위해 OPC와 attPSM 같은 분해능향상기술이 사용된다. 그러나 attPSM의 사용은 원하지 않는 pattern이 생성되는 sidelobe와 같은 문제가 발생한다. 따라서 serial image simulation올 통해 추출한 rule을 rule-based correction에 적용하여 sidelobe현상을 방지한다. 그리고 overlay margin 부족으로 나타나는 문제는 metal layer와 contact overlap되는 영역의 line edge를 확장하고, rule checking을 통해 최소한의 space margin을 확보하여 해결한다 따라서 overlay error를 rule-based correction을 사용하여 효과적으로 방지한다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.11
• /
• pp.541-545
• /
• 2002

This paper proposes the new narrow erase method to erase wall charges formed in an AC plasma display panel (PDP) cell. In the proposed method, pulse timing of switch at the sustain period is adjusted for inducing, a weak discharge. Then, after the narrow erase, the voltage of the X electrode is set to differ from that of the Y electrode. For the proposed method, the measured maximum address voltage margin was 38.3V at Y_Rest voltage of 100V and sustain voltage of 180${\sim}$185V. However, for the conventional method, in which the X and Y electrodes are set to be of equal voltage after the narrow erase, the measured maximum address voltage margin was 31.3V at Y_Rest voltage of 150V and sustain voltage of 180V. This result shows that the measured maximum voltage margin for the proposed method is about 7V(22%) higher than that for the conventional method.

• Restorative Dentistry and Endodontics
• /
• v.15 no.2
• /
• pp.122-126
• /
• 1990

To examine the microleakage of posterior esthetic restorative materials, using 2% methylene blue dye solution, dye penetration was determined with 80 permanent posterior teeth after thermocycling. The following results were obtained. 1. Amalgam group showed the most severe dye penetration of all test groups through the enamel and dentin / cementum margins. 2. Clearfil group showed much more dye penetration than P-50 at the enamel margin and than resin inlay system at the dentin / cementum margin. 3. Through the etched enamel margin, P-50 and resin inlay system groups showed no dye penetration, if any, but through the dentin / cementum margin, all test groups showed dye penetration. 4. Resin inlay system showed the least dye penetration of all test groups through the dentin / cementum margin.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.85-95
• /
• 2005

The margin level in the futures market platys an important role in balancing the default probability with the investor's opportunity cost. In this paper, we investigate whether the movement of KOSPI200 futures daily prices can be modeled with the extreme value theory. Based on this investigation, we examine the validity of the margin level set by the extreme value theory. Moreover, we propose an expected profit-maximization model for securities companies. In this model, the extreme value theory is used for cost estimation, and a regression analysis is used for revenue calculation. Computational results are presented to compare the extreme value distribution with the empirical distribution of margin violation in KOSPI200 and to examine the suitability of the expected profit-maximization model.

• KIEE International Transactions on Power Engineering
• /
• v.4A no.3
• /
• pp.141-145
• /
• 2004

FACTS devices, such as the Thyristor Controlled Series Compensator (TCSC) and Static Var Compensators (SVC), can help increase system load margin to improve static voltage stability. In power systems, because of the high cost and the effect value, the optimal placement for FACTS devices must be determined. This paper investigates the use of the series device (SVC) and the parallel device (TCSC) from the point of load margin to increase voltage stability. It considers the sensitivity of load margin to the line reactance and eigenvector of the collapse. The study has been carried out on the IEEE 14 Bus Test System to verify the validity and efficiency of the method. It reveals that incorporation of FACTS devices significantly enhance load margin as well as system stability.