• Journal of The Korean Association For Science Education
• /
• v.14 no.3
• /
• pp.285-292
• /
• 1994

The purpose of this study is to investigate the misconception about circulatory / excretional system and to determine the effectiveness of two teaching strategies. The subject was 214 middle school students. The control group was instructed with the traditional teaching method.On the other hand, the experimental group was taught with the concept mapping teaching method. Then the effectiveness of the two teaching strategies were compared in terms with the changes of their conceptions about circulatory/excertional system. The major findings of this study are as follows. 1. The major misconception types were identified. 1) The function of blood is only transportation. 2) The artery is equal to arterial blood. 3) The colon and the anus are also excretional organs. 4) Urine is formed from the bladder. 5) Urine and feces are also excrement. 2. Different conceptional change was observed between control group and experimental group at 0.05 significance level. The concept mapping strategy was more effective than traditional teaching method. 3. No significent difference was found between male and female students in the effectiveness of concept mapping strategy.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.225-227
• /
• 2005

The in-core neutron Flux Mapping System in a pressurized water reactor yields information on the neutron flux distribution in the reactor core at selected core locations by means of movable detectors. The obtained data are used to verify the reactor core design parameters. The detector cables run through guide tubes(thimbles), and typically thirty-six to fifty-eight thimbles are allocated in the reactor depending on the number of fuel assemblies. These thimbles are inserted into nuclear fuel assemblies through conduits connected from the bottom of the reactor vessel to a seal table. During the plant refueling outage period, the thimbles are withdrawn up to 4m from the seal table, the height of a nuclear fuel. In spite of their importance, however, the thimble handling work has been performed by only human operators. In addition, its efficiency is very low due to narrow working environments on the seal table, thereby resulting in the excessive radiation exposure of maintenance personnel. To solve these problems, a new thimble handling equipment for in-core flux mapping system was developed, and we confirmed its effectiveness through experiments.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.58-63
• /
• 2002

One of the important problems of OFDM system is the large PAPR of the output signal, which can result the significant signal distortion in presence of nonlinear amplifiers. To reduce the PAPR, we use fundamentally the level clipping and propose the modified mapping/demapping method for effective reducing the PAPR of the OFDM signals with level clipping. We can significantly improve the BER performance characteristics for the OFDM system. We discussed, through extensive computer simulations, the effects of level clipping and modified mapping/demapping method on the performance of OFDM system including the trade off between bandwidth expansion and BER performance and between bandwidth efficiency and BER performance.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.118-128
• /
• 2017

Many countries have been developing BIM-based building code checking system and studies in the utilization of Industry Foundation Classes (IFC) in building code checking. IFC is the open standard of BIM format. Currently, there is a disadvantage that could not include all of the attribute for the regulations of each country and there is the problem with the interoperability of the different defined IFC approach between BIM software. This study focus on developing, derived object and property by comparing through domestic regulation and IFC2x3 specification provided by the buildingSMART and classified review type depending on the interoperability of derived information. According to classified review type, the IFC data structure was established and property mapping contents were developed by including BIM software compatible information and creating a type of review plan. When the developed property mapping contents are applied into BIM-based building code checking system, checking of the BIM data generated from various fields is made effective and thus improving the interoperability of information.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.535-546
• /
• 2002

According as the users can connect to remote hosts at anytime by using internet, the demand of non-stop system is increased. Also, the research about on-line adding/deleting disks and hosts are progressed. This paper suggests that the method of reducing additional operation when we add disks to the stripping system. That method can fast mapping like equation based mapping method because of using so-called SZIT(Striping Zone Information Table) and equations. And that method can reduce the relocation overhead in striping system at adding disks.

• Journal of Ecology and Environment
• /
• v.48 no.1
• /
• pp.8-16
• /
• 2024

The integration and management of various national ecological assessments are essential for the benefit of the public. In the Republic of Korea, the Ecological and Natural Map (ENM) serves as a comprehensive platform that synthesizes the results of national ecosystem surveys into a unified system interface. To provide the current status and characteristics of our policy, we analyzed the ENMs and related appeals from 2014 to 2022. Following their implementation, the ENM Guidelines underwent nine revisions, with most of the revisions pertaining to appeals. Nine public announcements were made regarding the ENM, resulting in a gradual expansion of the conservation area. The data also showed a consistent increasing trend in appeals. Most of the 1st-grade areas in the ENM regions where appeals were filed have significantly decreased. The larger area or the smaller population density of an administrative distinct, the more appeals were filed. Our study presents information regarding the current status of the ENM system. The analysis of the operational direction and indicator trends across the 16-year period since the establishment of the system provides valuable insights for similar systems.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.88-92
• /
• 2015

Today, the medical information system has evolved in the way of integrated healthcare IT information systems. Therefore, it is trying to build advanced U-Healthcare service. Though the U-Healthcare environments is exchanged the information between systems in many cases, however since the each system is different, the integration and exchange of data is difficult. To overcome this problem, in this paper it proposes that we suggests a possible DBaaS(DataBase as a Service) for the heterogeneous integration of medical information management and data exchange. First, the proposed system builds DBaaS cloud by integrating the meta-DB Schema level and DB Schema for each hospital. And, the mapping the schema data and the existing hospital information system is possible using the International Standard HL7. By applying the proposed method to the hospital system, it comes true the efficient exchange of information between the patients, doctors, staffs through the data mapping of the one to multi-system.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.1 s.11
• /
• pp.51-58
• /
• 2004

Mobile Mapping System is an effective wav to obtain position and image using vehicle equipped with GPS(Global Positioning System), IMU(Inertial Measurement Unit), and CCD camera. It have been used various fields of load facility management, map upgrade and etc. It is difficult to upgrade Mobile Mopping System which is developed from abroad and add other sensors because we don't know the way to integrate and synchronize multi-sensors. In this paper, we present the effective way of the integration and synchronization method for multi sensors we designed and manufactured Synchronization equipment by considering sensors of laser, odometer and etc.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.3
• /
• pp.109-122
• /
• 2020

In recent, projection mapping, which has attracted high attention in the field of realistic media, is regarded as a technology to increase the users' immersion. However, most existing methods perform projection mapping on static objects. In this paper, we developed a technology to track the movements of users and dynamically map the media contents to the users' bodies. The projected media content is built by predefined gestures just using the user's bare hands without the special devices. An interactive immersive media system has been implemented by integrating these dynamic projection mapping technologies and gesture-based drawing technologies. The proposed realistic media system recognizes the movements and open / closed states of the user 's hands, selects the functions necessary to draw a picture. The users can freely draw the picture by changing the color of the brush using the colors of any real objects. In addition, the user's drawing is dynamically projected on the user's body, allowing the user to design and wear his t-shirt in real-time.

• Journal of Biosystems Engineering
• /
• v.27 no.3
• /
• pp.259-266
• /
• 2002

It is crucial to know spatial soil variability for precision farming. However, it is time-consuming, and difficult to measure spatial soil properties. Therefore, there are needs fur sensing technology to estimate spatial soil variability, and for electronic mapping technology to store, manipulate and process the sampled data. This research was conducted to develop a real-time soil organic matter sensor and an electronic mapping system. A soil organic matter sensor was developed with a spectrophotometer in the 900∼1,700 nm range. It was designed in a penetrator type to measure reflectance of soil at 15cm depth. The signal was calibrated with organic matter content (OMC) of the soil which was sampled in the field. The OMC was measured by the Walkeley-Black method. The soil OMCs were ranged from 0.07 to 7.96%. Statistical partial least square and principle component regression analyses were used as calibration methods. Coefficient of determination, standard error prediction and bias were 0.85 0.72 and -0.13, respectively. The electronic mapping system was consisted of the soil OMC sensor, a DGPS, a database and a makeshift vehicle. An algorithm was developed to acquire data on sampling position and its OMC and to store the data in the database. Fifty samples in fields were taken to make an N-fertilizer dosage map. Mean absolute error of these data was 0.59. The Kring method was used to interpolate data between sampling nodes. The interpolated data was used to make a soil OMC map. Also an N-fertilizer dosage map was drawn using the soil OMC map. The N-fertilizer dosage was determined by the fertilizing equation recommended by National Institute of Agricultural Science and Technology in Korea. Use of the N-fertilizer dosage map would increase precision fertilization up to 91% compared with conventional fertilization. Therefore, the developed electronic mapping system was feasible to not only precision determination of N-fertilizer dosage, but also reduction of environmental pollution.