• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.26-32
• /
• 2005

Recent earthquakes, measuring over a magnitude of 5.0, on the eastern coast of Korea, have aroused interest in earthquake analyses and the seismic design of caisson-type breakwaters. Most earthquake analysis methods, such as equivalent static analysis, response spectrum analysis, nonlinear analysis, and capacity analysis, are deterministic and have been used for seismic design and performance evaluation of coastal structures. However, deterministic methods are difficult for reflecting on one of the most important characteristics of earthquakes, i.e. the uncertainty of earthquakes. This paper presents results of probabilistic seismic hazard assessment(PSHA) of an actual caisson-type breakwater, considering uncertainties of earthquake occurrences and soil properties. First, the seismic vulnerability of a structure and the seismic hazard of the site are evaluated, using earthquake sets and a seismic hazard map; then, the seismic risk of the structure is assessed.

• Journal of Information Technology Applications and Management
• /
• v.28 no.6
• /
• pp.87-95
• /
• 2021

Recently interest for air pollution is gradually increasing. However, according to the environmental assessment of air quality, the level of air pollution in the nation is quite serious, and air pollutants measuring facilities are also not enough. In this paper, a secure air pollutants sensor system based low power wireless communication is designed and implemented. The proposed system is composed of three parts: air pollutants measuring sensors module, LoRa-based data transmission module, and monitoring module. In the air pollutants measuring module, the MSP430 board with six big air pollutants measuring sensors are used. The air pollutants sensing data is transmitted to the control server in the monitoring system using LoRa transmission module. The received sensing data is stored in the database of the monitoring system, and visualized in real-time on the map of the sensor locations. The implemented air pollutant sensor system can be used for measuring the level of air quality conveniently in our daily lives.

• The KIPS Transactions:PartD
• /
• v.12D no.6 s.102
• /
• pp.837-848
• /
• 2005

A multi-scale database is a set of spatial database, covering same geographic area with different scales and it can be derived from pre-existing databases. In the derivation processes of a new multi-scale spatial database, the geometries and topological relations on the source database can be transformed and the transformation can be the cause of the lack of integrity Therefore, it is necessary to assess the transformation whether it is consistent or not after the derivation process of a new multi-scale database. Thus, we propose assessment methods for the topological consistency between a source database and a derived multi-scale database in this paper. In particular, we focus on the case that 2-dimensional objects are collapsed to 1-dimensional ones in the derivation process of a multi-scale database. We also describe implementation of the assessment methods and show the results of the implementation with experimental data.

• Korean Journal of Remote Sensing
• /
• v.28 no.3
• /
• pp.319-327
• /
• 2012

In this paper, we introduce a newly developed photogrammetric software for automatic generation of high quality geo-products and its performance assessment carried out using various satellite images. Our newly developed software provides the latest techniques of an optimized sensor modelling, ortho-image generation and automated Digital Elevation Model (DEM) generation for diverse remote sensing images. In particular, images from dual- and multi-sensor images can be integrated for 3D mapping. This can be a novel innovation toward a wider applicability of remote sensing data, since 3D mapping has been limited within only single-sensor so far. We used Kompsat-2, Ikonos, QuickBird, Spot-5 high resolution satellite images to test an accuracy of 3D points and ortho-image generated by the software. Outputs were assessed by comparing reliable reference data. From various sensor combinations 3D mapping were implemented and their accuracy was evaluated using independent check points. Model accuracy of 1~2 pixels or better was achieved regardless of sensor combination type. The high resolution ortho-image results are consistent with the reference map on a scale of 1:5,000 after being rectified by the software and an accuracy of 1~2 pixels could be achieved through quantitative assessment. The developed software offers efficient critical geo-processing modules of various remote sensing images and it is expected that the software can be widely used to meet the demand on the high-quality geo products.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.1
• /
• pp.54-62
• /
• 2014

The Air and Space Interoperability Council (ASIC) has adopted the European Defence Agency (EDA) process for inter-regulatory military airworthiness authority recognition. However, there are gaps in the application of this process to nations outside of the European Union. This paper proposes a model that can effectively map diverse technical airworthiness regulatory frameworks. This model, referred to as the Product-Behaviour-Process (PBP) Bow-Tie model, provides the systematic structure needed to represent and compare regulatory frameworks. The PBP Bow-Tie model identifies key points of difference that need to be addressed, during inter-agency recognition between the two regulatory authorities. With the intention to adopt global use of the EDA process, the proposed PBP Bow-Tie model can be used as a basis for the successful recognition of regulatory frameworks outside of the European Union. Iris plots produced from the implementation of this model are presented, and proposed as a suitable means of illustrating the outcome of an assessment, and of supporting the comparisons of results. A comparative analysis of the Australian Defence Force and New Zealand Defence Force airworthiness regulatory frameworks is used as a case study. The case study clearly illustrates the effectiveness of the model in discerning regulatory framework differences; moreover, it has offered an opportunity to explore the limitations of the Iris plot.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.70-78
• /
• 2013

Before GBAS ground systems is installed at the airport, the site survey is needed to determine the suitability of proposed GBAS candidate sites depending on the siting requirements. Therefore, analysis of GPS signal reception environment, one of the site survey steps, is required. In this paper, the number of visible satellites, GPS signal strength, multipath error, radio frequency interference and predicted availability were analyzed using the GPS data of Gimpo International Airport measured by PortaSAT equipments and the analysis results were represented.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.374-377
• /
• 2004

In the highly competitive world, there has been a concomitant increase in the need for the research and planning methodology, which can perform an advanced assessment of technological opportunities and an early perception of threats and possibilities of the emerging technology according to the nation's economic and social status. the purpose of this research is to suggest schematized change aspects and new research directions hidden in bibliographical phenomenon of a paper in the science and technology field to science and technology researchers and policy planners. For this, the field this paper researches is the next generation OLED field. Thereason to choose this field is due to the importance of the next generation OLED, and wide scope connected by various fields. Besides, to measure application and technological fields by using bibliographical method and technology is as important as in a basic research field.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.21-28
• /
• 2017

The main goal of this paper is to assess application of UAV (Unmanned Aerial Vehicle) remote sensing and GIS based images in detection and measuring of rice field drought area in South Korea. Drought is recurring feature of the climatic events, which often hit South Korea, bringing significant water shortages, local economic losses and adverse social consequences. This paper describes the assesment of the near-realtime drought damage monitoring and reporting system for the agricultural drought region. The system is being developed using drought-related vegetation characteristics, which are derived from UAV remote sensing data. The study area is $3.07km^2$ of Wonbuk-myeon, Taean-gun, Chungnam in South Korea. UAV images were acquired three times from July 4 to October 29, 2015. Three images of the same test site have been analysed by object-based image classification technique. Drought damaged paddy rices reached $754,362m^2$, which is 47.1 %. The NongHyeop Agricultural Damage Insurance accepted agricultural land of 4.6 % ($34,932m^2$). For paddy rices by UAV investigation, the drought monitoring and crop productivity was effective in improving drought assessment method.

• The Journal of Korean Association of Computer Education
• /
• v.4 no.1
• /
• pp.175-181
• /
• 2001

WBI provides new opportunities to realize the flexible learning environment based on hypermedia and to support distance learning with a diverse interaction. The instructors or learners in WBI claim to be able to resolve reluctant fluctuations such as disorientation and cognitive overload. To overcome these phenomena, a supplementary tool able to manage a learning space organized by the instructor's or learner's own way and offer effective navigation techniques is presented in this paper. A learning space management and navigation tool called HyperMap dynamically represents the learning space in the form of a two-dimensional labeled graph. This HyperMap also can be used for an instruction design tool, learners portfolio for the exchange of learning experiences, and the assessment of WBI.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.631-639
• /
• 2011

There are problems in using existing fisheries maps, because of deterioration of paper maps, as well as various coordinate systems. In this study, accuracy of fishery maps in World Geodetic System are evaluated. Materials on fishery rights in the Jeollanam-do Province, a study area, used many kind of coordinate systems. During digitization, these coordinate systems have been converted and unified in one World Geodetic System, and one projection origin. In this research, the accuracy of the products of digitization is verified using DGPS surveying. The RMSEs are minimum of 4.62m(at the Younggwang Seas) to maximum of 17.47m(at the Jangheung Seas), and average of 11.97m. The results shows that the digitized fishery maps meet the accuracy standard of 1/25,000 digital topographic maps.