• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.38-43
• /
• 2007

Owing to the rapid progress in manufacturing technology of microscale devices, there are active research works in developing microscale propulsion systems. In this study, gas flows in nozzles with size of milli and sub-millimeter are investigated by using a CFD code based on the Navier-Stokes equations. The prediction results were compared with theoretical results of quasi-one-dimensional nozzle flow and experiment data. In general, theoretical values agree very well with the CFD results. However, theoretical values begin to deviate from the CFD and experimental data for relatively small Reynolds numbers and the nozzle shape with rectangular cross section. The primary reason for this discrepancy is due to the existence of the thick boundary layer at the wall in low Reynolds flows.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.1
• /
• pp.105-113
• /
• 2005

I investigate whether the efficient ratios used as the proxies of the agency costs maintained by Ang et al.(2000) is significant. Utilizing a sample of 77 manufacturing companies listed on the KOSDAQ from the TS2000 of the KSDA, The results are as follows. Agency costs are found to be decreasing with the ownership share of controlling shareholders and accounting performance becomes higher. But firm value measured by Tobin's Q ratio becomes lower according as the ownership of the controlling shareholders increases. If agency costs decrease in proportion to controlling shareholder's share, firm value should be higher according to the agency theory by Jensen and Meckling(I976). But the results of the empirical test of this study are inconsistent with Jensen and Meckling's(1976). Therefore the following study on the more useful proxies stand for agency costs should be needed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.28
• /
• pp.1-8
• /
• 1993

Electrical or electronic products have been becoming smaller and high integrated recently, with printed circuit boards(PCB's) being the key components for these products. The introduction of new technology of surface mounted devices(SMD) opens new ways towards high integration on the PCB. Many plants in eletronical industry which produce high variety of PCB's to meet the demands of customer orders require flexibility in PCB's production lines. This survey paper describes the related optimization problems and solution methods to the automated surface mount technology(SMT) assembly lines, and provides with the research direction for improving flexibility.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.225-235
• /
• 1998

The scientific evaluation on enterprise helps establishing better management policy. Financial index has been used for the enterprise evaluation as the objective data. However, the necessity of the subjective data for competitive power evaluation is advocated recently. Therefore, in this paper, we propose an evaluation model of competitive power on enterprise by fuzzy integral, using the objective and the subjective data. The evaluation factors are composed to the financial index, top management, product, organization and enterprise's environment. These factors are grouped by detailed sub-factors of 16 units. Lastly, utilizing these factors, the efficiency of this method was shown by the result of the case study of 10 manufacturing enterprises.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.63
• /
• pp.45-54
• /
• 2001

The process capability indices have been widely used in manufacturing industries to provide numerical measures of process potential and performance. This study is concerned with process controls and adjustments by incapability index $C_{pp}$ and its sub-indices. A monitoring for $\^{C}_{pp}$ would provide a convenient way to monitor changes on process capability after statistical control is established, since $C_{pp}$ simultaneously measures process variability and centering. Further, we can separate charting of process location and variability by sub-indices of $C_{pp}$, ($C_{ia}$, $C_{ip}$), without returning to $\={x}$-R chart, even though an out-of-control signals on $\^{C}_{pp}$ control chart is found.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.347-356
• /
• 1998

For assessing the capability of a process, the quantification of process location and variation is central to understanding the quality of units produced from the manufacturing process. Conventional process capability indices is insufficient to drive out the information for process condition, furthermore it is very difficult to evaluate the process capability accurately when the target value is not consistent with the center of specification, and/or the shape of distribution is changed, but the process incapability indices is enable to provide more detailed information to evaluate the process capability by dividing information about the process mean and variance. In this paper, we have a brief review and comparison about these indices, provide an understanding of the relationships between the process capability indices and the incapability indices. And we explore the strengths and weakness of these indices as they apply to normally distributed process, and to examine the effect that non-normality has on these indices.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.347-354
• /
• 1999

Statistical Process Control(SPC) which uses control charts is widely used to inspect and improve manufacturing process as a effective method. A parametric method is the most common in statistical process control. Shewhart chart was made under the assumption that measurements are independent and normal distribution. In practice, this assumption is often excluded, for example, in case of (equation omitted) chart, when the subgroup sample is small or correlation, it happens that measured data have bias or rejection of the normality test. A bootstrap method can be used in such a situation, which is calculated by resampling procedure without pre-distribution assumption. In this study, applying bootstrap percentile method to (equation omitted) chart, it is compared and evaluated standard process control limit with bootstrap percentile control limit. Also, under the normal and non-normal distributions, where parameter is 0.5, using computer simulation, it is compared standard parametric with bootstrap method which is used to decide process control limits in process quality.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.201-213
• /
• 1998

We address the problem of choosing the most economic mean value for an automatic filling operation on a production line through the sampling inspection. If quality characteristic of a unit is less than inspection specification then the goods is not accepted. Otherwise, it is accepted. The lots that the numbers of non-conforming units in a sample are larger than the allowable number of non-conforming units are rejected. The non-conforming units in the rejected lots are separated by the screening inspection. The non-conforming units separated are sold in discount price. We assume that quality characteristic is larger-the-better characteristic, the distribution of quality characteristic is normal distribution, and the standard deviation of the distribution is known. This paper presents total expected profit function model considering sales revenue, inspection costs, and material costs. The manufacturing process mean value maximizing total expected profit is determined, and the results of the process target value and total expected profit is analyzed as coefficients change.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.375-381
• /
• 1998

For products that are subject to inspections that lead to either acceptance or rejection, the p chart or control chart for proportion defective is applicable. The charting technique approach to quality control aims at alerting its user to any presentations in the properties of a manufactured product. This article presents an important tool available for quality control of a production process at the occurrence of defects in manufactured products at view low levels to improve the efficiency of the manufacturing productivity and to satisfy customer through the reduction of defect rates. To understand the consequences of the level of quality on competitive position, a more technical perspective is needed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.1
• /
• pp.48-58
• /
• 2007

For a sustainable development, the resources circulation system should be established and required alternative logistics area of enterprises. In this paper, we are to suggest a direction through analysis effects, and reduce, recycle, reuse factor of transportation, material handling, packing, information, management in logistics function, and effects of logistics organization on Firm Performance. We found significant correlations between the constructs extracted above, and between the constructs and firm's performance. This study was conducted with the subjects of manufacturing enterprises with concurrent reviews of literature and statistical analysis, and the meaning of this study would be the analysis of the influencers of the resources circulation system.