• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.74-84
• /
• 2009

The study aims that high quality recycled sand by wet manufacturing system can be used in practical way through basic material property. The basic material property test was done by 4 categories, dry manufacturing system (1) tandem and (2) parallel, wet manufacturing system (3) large capacity and (4) small capacity. RS-IV is the final production of (1) to (4) method, it is tested via KS F 2573 (recycled fine aggregate). RS-IV is satisfied with 4 items, those are absolute dry density, 0.08mm sieve throughput, clay lump amount, and organic impurity substance content. However, absorptivity item has problem in (1) and (2) method, (3) and (4) method are confirmed with norms 5% low. Also, the production quality of wet manufacturing system is better than dry manufacturing system in absolute dry density, absorptivity, 0.08mm sieve throughput, and clay lump amount.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.29-37
• /
• 2005

The main objective of this research was conducted to evaluate the impacts on the thermoplastic polymer which is a matrix polymer and the rice husk flour (RHF) which is a reinforcing filler relative to the manufacturing temperature and time when bio-composites were manufactured. In order to evaluate the impacts on the rice husk flour relative to the manufacturing temperature, the rice husk flour was persevered for 10 minutes to 2 hours period at $220^{\circ}C$ temperature which was then added with the polypropylene (PP) and low-density polyethylene (LDPE) to complete the manufacturing process of the bio-composites and measure the corresponding mechanical properties. As preserving time increased at $220^{\circ}C$, the tensile and impact strength were decreased due to the thermal degradation of the main components within the rice husk flour. The thermogravimetric analysis (TGA) was used to measure weight loss caused by the actual manufacturing temperature and the result was that the thermoplastic polymer had not scarcely occurred weight change, but there had been increasing rate of weight loss relative to time for the rice husk flour and the bio-composites under the consistent temperature of $220^{\circ}C$ for 2 hour time period. Therefore, the proper manufacturing temperature and time settings are significantly important features in order to prevent the reduction of mechanical properties which were induced throughout the manufacturing process under the high manufacturing temperature.

• Industrial Engineering and Management Systems
• /
• v.13 no.3
• /
• pp.252-257
• /
• 2014

Global economic recession, global market reduction, and the deteriorating economic recession are forcing the industry to reconsider the business plan and strategy related to supply chain regardless of the size of the companies. During the economic recession caused by financial anxiety, development of international collaborative producer is the key theme for a manufacturing industry to get over the situation. Especially, development of high-skilled people who are capable of handling global manufacturing management is the key factor in China which shifted from a world factory to a world market. In this background, we started the international project of global manufacturing education and training for Chinese company managers from 2009. In this paper, based on the research conducted by the universities and companies in China, a design of global manufacturing education and training is proposed. This presented design is based on the theory of Japanese production strategy and investigation of actual conditions for Chinese companies and the research methodology of business management practice with efficiency and productive for international level management organization. The effectiveness of the education design is evaluated by applying the international education and training project of Aoyama Gakuin Human Innovation Consulting Inc. and Vigor Management Technology Association.

• Journal of Distribution Science
• /
• v.15 no.4
• /
• pp.25-32
• /
• 2017

Purpose - The introduction and expansion of the railway network since the 19th century brought revolutionary changes in economic activities, performance, and structure. The purpose of this study is estimating the impact of railroads on the local agricultural and manufacturing structures in the 19th century USA. Research design, data, and methodology - To identify the impact of railroads on local economic structure, county-level panel data from the U.S. census were analyzed using a panel fixed-effect differences-in-differences regression. The empirical investigation focuses on whether railroads changed the overall volume and sectoral composition of the local agricultural sector, and whether they contributed to the growth of the local manufacturing industry and its productivity. Results - The railroad introduction led to the relative decline of the agricultural sector, while encouraging the growth of market-oriented gardening. As such, manufacturing productivity increased by the introduction of railroads, although manufacturing inputs and home manufactures were unaffected. Conclusions - The findings imply that railroads contributed to the growth of market-oriented farming in rural areas, and the rise of productivity in the local manufacturing sector. Meanwhile, evidence of railroad-driven growth for the entire agricultural sector or a massive reallocation of resources from agriculture to manufacturing were not found.

• International Journal of Quality Innovation
• /
• v.6 no.2
• /
• pp.59-89
• /
• 2005

Manufacturing Resources Planning (MRPII) is one kind of manufacturing information system that can help manufacturing companies gain competitive advantages. It is estimated that more than one hundred MRPII systems are available in the market, many of them are mature enough to solve most operational issues in accordance with users' requirements. More often than not, many of these systems provide more functions than a company expects. Manufacturing companies worldwide have attempted to implement these MRPII systems, however, many companies experienced failure (Turbide, 1996) due to managerial rather than technical issues. The authors propose an approach utilising a roadmap to integrate BPR and the MRPII implementation in order to overcome this difficulty. A detail road map is developed to guide this implementation, which is designed using a hierarchical analysis technique known as Integrated DEFinition Method (IDEF). IDEF is a systematic manufacturing management and integration-modeling tool. The proposed approach is implemented and illustrated using a reference company and the results indicated that 66% reduction in errors for maintaining the bills of materials system; 99% reduction in time to carry out material requirement planning; and 70% reduction in time previously taken for non-productive discussions.

• Journal of Information Technology Services
• /
• v.16 no.3
• /
• pp.1-15
• /
• 2017

This study is aimed to find out which factors among firm-specific resources, industry-based competition, and institutional conditions affect strategies for Korean IT manufacturing companies when they expand their business overseas, especially to Vietnam in this study. Also, it attempts to reveal which strategies among cost reduction, mass production, and localization affect performance of overseas expansion. Based on Strategy Tripod Theory as an integrating point-of-view embracing resource-based view, industry-based view, and institution-based view, research model was developed and tested through the survey of 83 Korean IT manufacturing companies expanded their business to Vietnam. Research findings show that (1) communication competency, industry competitiveness, industry attractiveness, and regulation of partner country affect cost reduction strategy. (2) International experience, communication competency, international orientation, and competitiveness is significantly associated with mass production strategy. (3) And international experience, communication competency, and industry competitiveness affect localization. (4) Ultimately, mass production strategy and localization strategy significantly increase performance of expansion to Vietnam. The theoretical contribution of this study is to adopt an integrative approach based on strategy tripod theory. As practical implications, it suggests factors and strategies that IT manufacturing companies interested in expansion to Vietnam should consider. In sum, we believe this study can contribute to Korean IT manufacturing industry by suggesting key success factors and appropriate strategies for overseas expansion.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.333-339
• /
• 2022

The purpose of the article is to identify priority trends of technological innovations and strategic opportunities for using the smart potential to the benefit of the Russian industrial production development in the context of digital transformation. The article substantiates the demand for technological process automation at industrial enterprises in Russia and considers the possibilities of using artificial intelligence and the implementation of smart manufacturing in the industry. The article reveals the priorities of the leading Russian industrial companies in the field of digitalization, namely, an expansion of the use of cloud technologies, predictive analysis, IaaS services (virtual data storage and processing centers), supervisory control, and data acquisition (SCADA), etc. The authors give the characteristics of the monitoring of the smart manufacturing systems development indicators in the Russian Federation, conducted by Rosstat since 2020; presents projected data on the assessment of the required resources in relation to the instruments of state support for the development of smart manufacturing technologies for the period until 2024. The article determines targets for the development of smart technologies within the framework of the Federal Project "Digital Technologies".

• Resources Recycling
• /
• v.8 no.3
• /
• pp.31-36
• /
• 1999

In the process of manufacturing acrylonitrile, azeotrope of water-acetonitrile is formed as by-product. To1uene-ethylacetate mixture was selected as solvent to determine the liquid-liquid equilibria for to1uene(l)-water(2)-acetomtrile(3)-ethyjacetate(4) system. The experimental he-line data were correlated with the UNIFAC model. The distribution and selectivity for quaternary system was also studied.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.71-74
• /
• 2000

Due to the complexity of parts flow and limited resources, FMS(Flexible Manufacturing System) develops blocking, starvation and deadlock problems, which reduce its performance. In order to minimize such problems buffers are imposed between workstations of the manufacturing lines. In this paper, we are concerned with finding the optimal buffer allocation with regard to maximizing system throughput in limited total buffer capacity situation of FMS. A grouping heuristic to solve the buffer allocation problem is proposed. Computer simulation using Arena will be experimented to show the validation of the proposed algotithm.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2009.10a
• /
• pp.230-233
• /
• 2009

Remanufacturing is an industrial manufacturing process. The merits of manufacturing are to reuse old products to perform like a new product and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. This paper proposes a systemic approach for activating the domestic remanufacturing industry. The approach is based on inside and outside regulations to apply remanufacturing companies. And, we analyzed the state and problems of remanufacturing industry for automobile parts.