• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.546-551
• /
• 2004

Effect of fried beancurd containing powered green tea on the serum lipid metabolism in rats were investigated. HPLC analysis of green tea-fried beancurd showed that epigallocatechin, epicatechin, epicatechin gallate and epigallocatechin gallate were intact without degradation during manufacturing process. Serum HDL-cholesterol, LDL-cholesterol, triglyceride and glucose concentrations were measured in rats fed experimental diet containing green tea-fried beancurd. Serum LDL-cholesterol contents and blood glucose were significantly decreased with treatment of green tea-fried beancurd comparing to control.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.56-58
• /
• 2005

To illustrate an application of the field effect transistor (FET) structure, this study suggests a new cantilever, using atomic force microscopy (AFM), for sensing surface potentials in nanoscale. A combination of the micro-electromechanical system technique for surface and bulk and the complementary metal oxide semiconductor process has been employed to fabricate the cantilever with a silicon-on-insulator (SOI) wafer. After the implantation of a high-ion dose, thermal annealing was used to control the channel length between the source and the drain. The basic principle of this cantilever is similar to the FET without a gate electrode.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.3
• /
• pp.197-209
• /
• 2004

A company wishes to obtain a competitive edge by adopting an efficient logistics information system to control the logistics management process. The elements of the competitive edges a company targets are to maintain good quality, reduce cost and on-time delivery and those competitive edges are closely related to the cycle time of a product. The logistics information system in a company is also closely tied with other business activities than the logistics itself. Therefore it is essential to choose a system that will help rationalize the logistics but also overall business operations along the supply chain from manufacturing to distribution of the products. This paper aims to research and analyze a problem with a logistics information system through case study and to suggest a logistics information system with RFID in place adopted to eliminate problems such as damages, loss and defect rates.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.117-137
• /
• 2012

In the ALC(Autoclaved lightweight concrete) manufacturing process, if the pre-cured semi-cake is removed after proper time is passed, it will be hard to retain the moisture and be easily cracked. Therefore, in this research, we took the research by multiple regression analysis to find relationship between variables for the prediction the hardness that is the control standard of the removal time. We study the relationship between Independent variables such as the V/T(Vibration Time), V/T movement, expansion height, curing time, placing temperature, Rising and C/S ratio and the Dependent variables, the hardness by multiple regression analysis. In this study, first, we calculated regression equation by the regression analysis, then we tried phased regression analysis, best subset regression analysis and residual analysis. At last, we could verify curing time, placing temperature, Rising and C/S ratio influence to the hardness by the estimated regression equation.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.90-95
• /
• 2008

This article presents practical advice regarding the implementation and management of an impeccable Building Management System. The BMS was introduced to the series of computerized systems including manufacturing, storage, distribution, and quality control. Recently revised GMP regulation is requesting an improvement in drug product quality regulatory system by computer system validation. Quality is critical to guarantee the efficacy and the safety of drugs and is approved in the evaluation process after the audit trail application. HVAC parameter monitoring system will record the identity of operators entering or confirming critical data. Authority to amend entered data should be restricted to nominated persons. Any alteration to an entry of critical data should be authorized in advance and recorded with the reason for the change.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.51-56
• /
• 2008

Thermoforming is one of the most versatile and economical processes available for shaping polymer products, but obtaining a uniform thickness of the final product using this method is difficult. Heater power adjustment is very important because the thickness distribution depends strongly on the distribution of the sheet temperature. In this paper, the steady-state optimum distribution of heater power is first ascertained by a numerical optimization to obtain a uniform sheet temperature. The time-dependent optimal heater input is then determined to decrease the temperature difference through the direction of the thickness using the response surface method and the D-optimal method. The optimal results show that the time-dependent optimum heater power distribution gives an acceptable uniform sheet temperature in the forming temperature range by the end of the heating process.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.171-180
• /
• 1989

The automation of textile machinery in the fabric manufacture is strongly demanded in order to improve the industrial structure related to labour-force and cost curtailment, in addition, to keep step with the various and small production system and the consumption tendency requesting a high quality fabrics. In this thesis, the technology applying the computer to an air jet loom and characteristics obtained from it are derived. To efficently apply an automized and unmanned textile machinery, an air jet loom is equipped with the let-off, take-up and weft insertion device attached a central processing unit(CPU) which can automatically operate according to a program. As a result, an air jet loom is available for the factory automation, which has advantages including productivity promotion, high quality security, energy savings, specification & variety, efficient production control, in fabric manufacturing process.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.45-49
• /
• 2004

We examined large particles and filter size effects of Central Chemical Supplying (CCS) system for STI-CMP on Light Point Defects (LPDs) after polishing. As manufacturing process recently gets thinner below 0.1 um line width, it is very important to keep down post-CMP micro-scratch and LPDs in case of STI-CMP. Therefore, we must control the size distribution of large particles in a slurry. With optimization of final filter size, CCS system is one of the solutions for this issue. The oxide and nitride CMP tests were accomplished using nano-ceria slurries made by ourselves. The number of large particles in a slurry and the number of LPDs on the wafer surface after CMP were reduced with decrease of the final filter size. Oxide removal rates slightly changed according to the final filter size, showing the good performance of self-made nano ceria slurries.

• Journal of Welding and Joining
• /
• v.35 no.2
• /
• pp.1-5
• /
• 2017

Many microelectronic devices are miniaturizing the capacitance density and the size of the capacitor. Along with this miniaturization of electronic circuits, tantalum (Ta) capacitors have been on the market due to its large demands worldwide and advantages such as high volumetric efficiency, low temperature coefficient of capacitance, high stability and reliability. During a tantalum capacitor manufacturing process, arc welding has been used to weld base frame and sub frame. This arc welding may have limitations since the downsizing of the weldment depends on the size of welding electrode and the contact time may prevent from improving productivity. Therefore, to solve these problems, this study applies laser spot welding to weld nickel (Ni) and Au-Sn-Ni alloy using CW IR fiber laser with lap joint geometry. All laser parameters are fixed and the only control variable is laser irradiance time. Four different shapes, such as no melting upper workpiece, asymmetric spherical-shaped weldment, symmetric weldment, and, excessive weldment, are observed. This shape may be due to different temperature distribution and flow pattern during the laser spot cutting.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.2
• /
• pp.97-109
• /
• 2014

This paper considers a reverse supply chain with simultaneous recovery of used products and manufacturing of brand-new ones. Recovered products are downgraded and have to be sold in a market different from that of brand-new products at a different price. In case of a shortage of recovered product inventory, a brand-new item, if available, can be offered at the price of a recovered product. In other words, one-way demand substitution is allowed. We address the joint decision of when to manufacture brand-new product, when to recover returned product, and how to control demand substitution to maximize the hybrid production system's profits. To this end, we propose a Markov decision Process model and investigate the structure of the optimal policy. Performance comparison is numerically implemented between the models with and without downward demand substitution option under different operating conditions of the system parameters.